IFM IN506A Handleiding

IFM Niet gecategoriseerd IN506A

Lees hieronder de 📖 handleiding in het Nederlandse voor IFM IN506A (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 83 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
UK
Operating instructions
(Ex protection related part) for inductive sensors
according to EU directive 2014/34/EU annex VIII (ATEX)
group II, equipment category 3D/3G
IN507A
704238 / 01 01 / 2017
2
Remarks for safe use in hazardous areas
Functions and features
• Use in hazardous areas according to the classification
II 3D
(group II, category 3D, apparatus for dust atmosphere).
The requirements of the standards EN 60079-0 and EN 60079-31 are met.
• Use in hazardous areas according to the classification
II 3G
(group II, category 3G, apparatus for gas atmosphere).
The requirements of the EN 60079-15 standard are met.
• Marking (see unit or technical data sheet):
II 3D Ex tc IIIC T80°C Dc IP67 X
II 3G Ex nA IIC T6 Gc X
• Permissible ambient temperature of the application (proper usage) (see unit or technical
data sheet):
-20°C 60°C≤ Ta ≤
Installation / Set-up
The units must only be installed, connected and set up by qualified staff. The qualified staff
must have knowledge of protection classes, regulations and provisions for apparatus in
hazardous areas.
Check whether the classification (see "Marking" above and marking on the unit) is suitable
for the application.
Installation remarks / Installation
• Adhere to the respective national regulations and provisions as well as the relevant
installation regulations.
• Avoid electrostatic charging on plastic units and cables.
• To avoid electrostatic charging clean the unit with a damp cloth only.
• To avoid electrostatic charging steps must be taken to ensure the equalisation of potential
of metal parts (plug housing, fixing elements, protective housing, etc.).
• Do not mount the unit in the dust flow.
• Avoid dust deposits on the units.
• Protect the units and the cables efficiently against damage.
• For the connections and the electrical characteristics please see the unit marking or the
technical data sheet.
• To avoid soiling, do not remove the connector cover until attaching the socket.
• Protect the unit (plastic parts) from UV light.
Special conditions for safe operation
• The unit (1) must only be installed in conjunction with the supplied protective housing (2).
• Use the supplied mounting plate (4) to ensure a secure fit of the mounting screws (5).
3
UK
1
24
5
3
1
1. Proximity sensor.
2. Protective housing.
3. Socket EVC**A (accessory to be orde-
red separately).
4. Mounting plate.
5. Mounting screws (supplied with the
unit).
• Attach the connection cable (3) and tighten firmly before mounting.
• Use sockets which are suited for hazardous areas, e.g. ifm sockets EVC**A with Ex
certificate (certificate number BVS 08 ATEX E 109 U).
• Secure the sockets by tightening the hexagon coupling nut sufficiently according to the
requirements of the Ex protection related operating instructions of the socket.
• Do not disconnect the connector while live.
• The housings are rated for a low mechanical risk and tested with an impact energy of 4
joules.
• The sensing face is not designed for mechanical stress. Therefore the unit must only be
operated with target pucks which exclude mechanical stress on the sensing face.
• Tightening torque of the mounting screws MA = 1 Nm (±10%).
Maintenance / Repair
The unit must not be modified nor can it be repaired. In case of a fault please contact the
manufacturer.
If required, the technical data sheets and EC declarations of conformity can be obtained
from the manufacturer. Indicate the article number.

Product specificaties

Merk: IFM
Categorie: Niet gecategoriseerd
Model: IN506A

Heb je hulp nodig?

Als je hulp nodig hebt met IFM IN506A stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd IFM

IFM

IFM DP4302 Handleiding

12 April 2024
IFM

IFM EVCB02 Handleiding

11 Maart 2024
IFM

IFM EVCB03 Handleiding

11 Maart 2024
IFM

IFM EVF666 Handleiding

11 Maart 2024
IFM

IFM TM4599 Handleiding

8 Januari 2024
IFM

IFM ZB0074 Handleiding

8 Januari 2024
IFM

IFM EVF661 Handleiding

8 Januari 2024
IFM

IFM IIP201 Handleiding

7 Januari 2024
IFM

IFM DP4200 Handleiding

7 Januari 2024
IFM

IFM IIP200 Handleiding

7 Januari 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive

Playtive IAN 327221 Handleiding

1 Mei 2024
Samsung

Samsung UN32J4001AF Handleiding

1 Mei 2024
Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024