IFM IF5898 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor IFM IF5898 (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
Installation Instructions
Inductive sensor
with optical setting aid
701228 / 03 11 / 2007
UK
UK
UK
UKUK
UK
2
Function and features
This inductive sensor detects metals without contact and indicates their presence by
providing a switched signal.
The nominal sensing range (Sn) can be seen in the type designation on the type
label on the unit; operating distance (Sa) 0 ... 0,81 x Sn; (values based on standard
measurement with mild steel; a shorter sensing range for other metals).
Electrical connection
Disconnect power before connecting the sensor. Connection strictly to the indications
on the type label. The unit can be used as normally open ( ) or as normally
closed ( ).
Installation
Mounting by means of a mounting device.
Adjust the unit. Adjustment is correct
when the red LED light. Secure does not
by means of the nuts provided so that it
cannot work loose.
Non-flush installation.
21
c
LED yellow / red
d
Target
Open space around the sensing face when mounted in metal:
3 x Sn
D
D
D
2 x Sn
3
UK
Minimum distance when several sensors of the same type are mounted:
2 x DD D
8 x Sn
Operation
Check the safe functioning of the sensor. Display by LEDs:
The yellow LED is lit when the output is switched.
The red LED is lit in case of faulty adjustment.
output function
LED yellow
No object in the detection range.
LED red
LED yellow
Safe detection of the object.
LED red
LED yellow Unsafe detection of the object
(readjust the unit).
LED red
LED yellow Uncertain function: predamping of the
unit by metal deposits or insufficient
open space around the active face;
(clean the active face or readjust the unit).
LED red
The operation of the sensor is maintenance-free.
For perfect functioning make sure that:
the sensing face and the open space are kept free of metal deposits and foreign
bodies, particularly for installation with the sensing face facing upwards;
EMC: The unit conforms to the requirements of EN 60947-5-2.
•
•
•
•


Product specificaties

Merk: IFM
Categorie: Niet gecategoriseerd
Model: IF5898

Heb je hulp nodig?

Als je hulp nodig hebt met IFM IF5898 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd IFM

IFM

IFM DP4302 Handleiding

12 April 2024
IFM

IFM EVCB02 Handleiding

11 Maart 2024
IFM

IFM EVCB03 Handleiding

11 Maart 2024
IFM

IFM EVF666 Handleiding

11 Maart 2024
IFM

IFM TM4599 Handleiding

8 Januari 2024
IFM

IFM ZB0074 Handleiding

8 Januari 2024
IFM

IFM EVF661 Handleiding

8 Januari 2024
IFM

IFM IIP201 Handleiding

7 Januari 2024
IFM

IFM DP4200 Handleiding

7 Januari 2024
IFM

IFM IIP200 Handleiding

7 Januari 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd