IFM E70599 Handleiding
IFM
Niet gecategoriseerd
E70599
Bekijk gratis de handleiding van IFM E70599 (5 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 20 mensen en kreeg gemiddeld 4.7 sterren uit 10.5 reviews. Heb je een vraag over IFM E70599 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/5
Installation instructions
FC insulation displacement connector
E70598
E70599
80271733/00 12/2017
UK
2
1 Preliminary note
Technical data, approvals, accessories and further information at
www.ifm.com.
2 Safety instructions
• Read this document before setting up the product and keep it during the entire
service life.
• The product must be suitable for the corresponding applications and
environmental conditions without any restrictions.
• Only use the product for its intended purpose ( Functions and features).→
• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur.
• The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator.
• Installation, electrical connection, set-up, operation and maintenance of the
product must be carried out by qualified personnel authorised by the machine
operator.
• The plant manufacturer is responsible for the safety of the plant in which the
device is installed.
• If the device is used in a way that is not intended by the manufacturer, the
protection supported by the device may be impaired.
• Protect units and cables against damage.
3 Functions and features
The FC insulation displacement connector carries the AS-i voltage from the flat
cable to the round cable (open end).
• Current rating 4 A.
3
UK
4 Installation
►Disconnect power.
►Loosen screw 1 (included) and open the
device.
1: screw (tightening torque 1.65 Nm)
2: core colours (brown AS-i + / blue AS-i -)
2
1
►Choose a flat mounting surface and fix the
splitter on it (mounting holes 3).
The mounting screws are not supplied.
3
►Insert the yellow AS-i flat cable for the AS-i
voltage in the upper flat cable duct.
►Place the cable correctly in the profile slot.
Product specificaties
| Merk: | IFM |
| Categorie: | Niet gecategoriseerd |
| Model: | E70599 |
Heb je hulp nodig?
Als je hulp nodig hebt met IFM E70599 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd IFM
3 September 2025
3 September 2025
2 September 2025
27 Augustus 2025
15 Augustus 2025
15 Augustus 2025
15 Augustus 2025
15 Augustus 2025
15 Augustus 2025
14 Augustus 2025
Handleiding Niet gecategoriseerd
- Brandt
- MYVU
- TEF
- New Pol
- Exped
- Tone City
- Zempire
- Luminex
- Frient
- Sencor
- Xigmatek
- Bendix King
- Crane Song
- Dream Power
- Morley
Nieuwste handleidingen voor Niet gecategoriseerd
14 September 2025
14 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025
13 September 2025