IFM E70580 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor IFM E70580 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 100 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Installation instructions
AS-i bus termination
E70580
7391014/00 06 / 2014
UK
2
1 Safety instructions
• Please read the product description prior to set-up of the unit. Ensure that the
product is suitable for your application without any restrictions.
• The unit conforms to the relevant regulations and EC directives.
• Improper or non-intended use may lead to malfunctions of the unit or to
unwanted effects in your application.
• That is why installation, electrical connection, set-up, operation and
maintenance of the unit must only be carried out by qualified personnel
authorised by the machine operator.
2 Functions and features
• The passive AS-i bus termination includes two different terminating resistors
(Z1 and Z2) and is used to improve the signal quality for total cable lengths of
≥ 100 m.
• Three-level voltage monitoring and display for AS-Interface and AUX.
• Cable lengths of up to 200 m are possible when the AS-i bus termination is
installed at the point furthest away from the AS-i power supply.
• Max. current consumption < 15 mA.
3 Display
• Green LED lights: AS-i voltage > 26.5 V DC
• Yellow LED lights: AS-i voltage > 18 V DC
4 Installation
â–ºDisconnect power.
3
UK
â–ºLoosen screw 1 (included) and open the bus
termination.
â–ºChoose a flat mounting surface and fix the bus
termination on it (mounting holes 1).
The mounting screws are not supplied.
â–ºPreferably place the AS-i cable in the upper
profile slot (2) (terminating resistor Z1).
Should the required signal quality not be sufficient
despite a cable length of up to 200 m, place the
AS-i cable in the lower profile slot (3) (terminating
restistor Z2).
â–ºPlace the cable correctly in the profile slot.
3
2
â–ºThe free profile slot can be used for monitoring
the external voltage supply (AUX, black flat
cable).
â–ºIf the black flat cable is not used, seal the
profile slot with a flat cable blank (E70399).


Product specificaties

Merk: IFM
Categorie: Niet gecategoriseerd
Model: E70580

Heb je hulp nodig?

Als je hulp nodig hebt met IFM E70580 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd IFM

IFM

IFM DP4302 Handleiding

12 April 2024
IFM

IFM EVCB02 Handleiding

11 Maart 2024
IFM

IFM EVCB03 Handleiding

11 Maart 2024
IFM

IFM EVF666 Handleiding

11 Maart 2024
IFM

IFM TM4599 Handleiding

8 Januari 2024
IFM

IFM ZB0074 Handleiding

8 Januari 2024
IFM

IFM EVF661 Handleiding

8 Januari 2024
IFM

IFM IIP201 Handleiding

7 Januari 2024
IFM

IFM DP4200 Handleiding

7 Januari 2024
IFM

IFM IIP200 Handleiding

7 Januari 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd