IFM E37421 Handleiding

IFM Niet gecategoriseerd E37421

Lees hieronder de 📖 handleiding in het Nederlandse voor IFM E37421 (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
Installation instructions
Welding thermowell
E30403
E374x0
E374x1
11493618 / 0012 / 2022
GB
E30403 E374x0 E374x1 Welding thermowell
2
1 Preliminary note
You will find instructions, technical data, approvals and further information using the QR code on the
unit / packaging or at .www.ifm.com
2 Safety instructions
• The unit described is a subcomponent for integration into a system.
– The system architect is responsible for the safety of the system.
– The system architect undertakes to perform a risk assessment and to create documentation in
accordance with legal and normative requirements to be provided to the operator and user of
the system. This documentation must contain all necessary information and safety instructions
for the operator, the user and, if applicable, for any service personnel authorised by the
architect of the system.
• Read this document before setting up the product and keep it during the entire service life.
• The product must be suitable for the corresponding applications and environmental conditions
without any restrictions.
• Only use the product for its intended purpose ( Intended use).Ò
• Only use the product for permissible media.
• If the operating instructions or the technical data are not adhered to, personal injury and/or damage
to property may occur.
• The manufacturer assumes no liability or warranty for any consequences caused by tampering with
the product or incorrect use by the operator.
• Installation, electrical connection, set-up, operation and maintenance of the product must be
carried out by qualified personnel authorised by the machine operator.
• Protect the product against damage.
3 Intended use
The thermowell protects temperature sensors against aggressive media, high pressures and high flow
velocities.
The Thermowell allows replacement of the sensor without process interruption.
4 Installation
General notes on the welding operation:
uThe welding operation is to be carried out by qualified personnel according to state-of-the-art
technology.
uUse materials and welding operations that are suitable for the housing material.
uKeep the surfaces free from any contamination.
uEnsure the careful preparation of the components.
In case welded adapters are used, the food contact surface must be smooth (surface roughness
Ra < 0.8 µm) and the welding has to be done according to EHEDG Guideline 9 and 35.
Welding thermowell E30403 E374x0 E374x1
3
Welding operation:
Fig.1: Applying the fixing points Fig.2: Applying the welding seams
uApply the fixing points of the welding thermowell at equal distance (crosswise) with a sufficient
adhesive force.
uApply the welding seams between the fixing points opposite each other.
uEnsure sufficient intervals between the individual welding operations to avoid glowing through or
warping of the welding thermowell due to overheating.
After completion of the welding operation:
uLet the workpiece cool down.
uSlightly grease the thread using a lubricating paste which is suitable and approved for the
application.
uScrew the sensor into the adapter and tighten. Tightening torque: 30...50 Nm.

Product specificaties

Merk: IFM
Categorie: Niet gecategoriseerd
Model: E37421

Heb je hulp nodig?

Als je hulp nodig hebt met IFM E37421 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd IFM

IFM

IFM DP4302 Handleiding

12 April 2024
IFM

IFM EVCB02 Handleiding

11 Maart 2024
IFM

IFM EVCB03 Handleiding

11 Maart 2024
IFM

IFM EVF666 Handleiding

11 Maart 2024
IFM

IFM TM4599 Handleiding

8 Januari 2024
IFM

IFM ZB0074 Handleiding

8 Januari 2024
IFM

IFM EVF661 Handleiding

8 Januari 2024
IFM

IFM IIP201 Handleiding

7 Januari 2024
IFM

IFM DP4200 Handleiding

7 Januari 2024
IFM

IFM IIP200 Handleiding

7 Januari 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive

Playtive IAN 327221 Handleiding

1 Mei 2024
Samsung

Samsung UN32J4001AF Handleiding

1 Mei 2024
Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024