IFM E33732 Handleiding


Bekijk gratis de handleiding van IFM E33732 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 17 mensen en kreeg gemiddeld 4.8 sterren uit 9 reviews. Heb je een vraag over IFM E33732 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/2
Installation instructions
Aseptoflex Vario adapter
with metal-to-metal seal
E337xx
E338xx
704863/01 02/2011
UK
2
1 Installation sensor - adapter
Screw the sensor into the adapter
until it is hand-tight. When doing
so, avoid mechanical effects on the
sealing areas, the hygienic area and
the pressure measuring cell.
The inside of the adapter is coated with
parylene C (USP class VI). Therefore
it is not necessary to use additional
lubricants.
B
Clamp the sensor + adapter into a
clamping device (B). Tighten the
clamping device only slightly so that
the adapter does not warp.
Tighten the sensor using a spanner
until you can feel the end stop (this
corresponds to a maximum tighten-
ing torque of 35 Nm). Note: Further
tightening may affect the sealing
effect.
2 Mounting to the process connection
Fix the sensor + adapter are fixed to the process connection using a fixing ele-
ment (coupling nut, clamp flange, etc.).
If it is not possible to slide the fixing element down over the top of the unit: slide
it up over the bottom of the unit before the adapter is mounted.
Use in hygienic areas to EHEDG:
Make sure that the sensors are integrated into the system in accord-
ance with EHEDG.


Product specificaties

Merk: IFM
Categorie: Niet gecategoriseerd
Model: E33732

Heb je hulp nodig?

Als je hulp nodig hebt met IFM E33732 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden