IFM E33013 Handleiding


Bekijk gratis de handleiding van IFM E33013 (3 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 22 mensen en kreeg gemiddeld 4.6 sterren uit 11.5 reviews. Heb je een vraag over IFM E33013 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/3
Installation Instructions
Aseptoflex adapter
E330xx / E331xx
706008/00 05/2011
UK
UK
UK
UK
UK
2
Mount
adapter (C) to sensor (A) first,
then sensor + adapter to the pro-
cess connection by means of a nut,
a clamping flange or similar (B).
If it is not possible to slide the fixing
element (B) down over the top of the
sensor: slide it up over the bottom
of the sensor before the adapter is
mounted.
A
B
C
NOTE: A guarantee for a long-term stable and maintenance-free fitting, with no
bug traps in the hygienic sealing of the metal seal (Aseptoflex connection) is only
valid for once-only mounting.
Mounting of the adapter:
Slightly grease the threads and
sealing areas of the sensor and ad-
apter with the lubricating paste (1).
The paste must be suitable and
approved for the application and
compatible with the elastomers
used.
Recommendation: Klüber paste
UH1 84-201 with USDA-H1 appro-
val for the food industry.
Make sure that the O-ring (D) is
correctly positioned.
D
1
3
UK
Screw the sensor into the adapter
until it is hand-tight. Do not damage
the sealing chamfers.
I
Clamp the sensor + adapter into a
clamping device (E). The sealing
chamfers (F) must not be damaged.
Tighten the sensor using a spanner
until you can feel the end stop (this
corresponds to a maximum tighte-
ning torque of 25 Nm / 18 ft-lb).
Note: Further tightening may affect
the sealing effect.
E
F


Product specificaties

Merk: IFM
Categorie: Niet gecategoriseerd
Model: E33013

Heb je hulp nodig?

Als je hulp nodig hebt met IFM E33013 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden