IFM E30062 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor IFM E30062 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 143 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Montageanleitung
Installation Instructions
Notice de Montage
Adapter
zur Verbindung von
Schutzschlauch mit Kupplung ½”-14 NPT
und
Drucksensoren mit seitlicher
Steckverbindung
Adapter
for the connection of
conduit adapters with ½”-14 NPT coupling
to
pressure sensors with lateral connector
Adaptateur
pour le raccordement d'un
tube protecteur avec raccord ½”-14 NPT
aux
capteurs de pression avec connecteur
latéral
E30062
ifm electronic gmbh • Friedrichstr. 1 • 45128 Essen http://www.ifm.com
Sachnr. 701393/00 08/01
1 2 3 4 6 75
A
Schieben Sie den Schutzschlauch (7) ber dasĂĽ
Verbindungskabel.
Ziehen Sie die Schutzfolie von der Dichtung (4).
Kleben Sie die Dichtung auf das Klemmst ck (5). ĂĽ
Schrauben Sie das Verbindungskabel auf den
Stecker des Sensors.
Schieben Sie das Klemmst ck auf das Verbin-ĂĽ
dungskabel. Schrauben Sie die Kupplung (A) des
Schutzschlauchs in das KlemmstĂĽck.
Legen Sie den Spannb gel (1) ber den Sensor,ĂĽ ĂĽ
schieben Sie das Klemmst ck auf den BĂĽ ĂĽgel,
schrauben Sie die Muttern lose auf.
Richten Sie den Adapter aus und ziehen Sie die
Muttern gleichm ig fest (max. Anzugsmomentäß
5 Nm / 3.5 Lbf.ft).
1 2
3 4
5
Spannb gelĂĽ
Sensor
Verbindungskabel
Dichtung
Klemmst ckĂĽ
Muttern
Schutzschlauch
mit ½”-14 NPT-Kupplung
1
2
3
4
5
6
7
1 2 3 4 6 75
A
Slip the conduit adapter (7) onto the connection
cable.
Remove the protective foil from the seal (4).
Glue the seal onto the clamping device (5).
Screw the connection cable onto the sensor
plug.
Slip the clamping device onto the connection
cable. Screw the coupling (A) of the conduit
adapter into the clamping device.
Put the clamp fastener (1) around the sensor, slip
the clamping device onto it, screw the nuts
slightly onto it.
Align the adapter and tighten the nuts evenly
(max. tightening torque 5 Nm /3.5 Lbf.ft).
1 2
3 4
5
clamp fastener
sensor
connection cable
seal
clamping device
nuts
conduit adapter
with ½”-14 NP coupling
1
2
3
4
5
6
7


Product specificaties

Merk: IFM
Categorie: Niet gecategoriseerd
Model: E30062

Heb je hulp nodig?

Als je hulp nodig hebt met IFM E30062 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd IFM

IFM

IFM DP4302 Handleiding

12 April 2024
IFM

IFM EVCB02 Handleiding

11 Maart 2024
IFM

IFM EVCB03 Handleiding

11 Maart 2024
IFM

IFM EVF666 Handleiding

11 Maart 2024
IFM

IFM TM4599 Handleiding

8 Januari 2024
IFM

IFM ZB0074 Handleiding

8 Januari 2024
IFM

IFM EVF661 Handleiding

8 Januari 2024
IFM

IFM IIP201 Handleiding

7 Januari 2024
IFM

IFM DP4200 Handleiding

7 Januari 2024
IFM

IFM IIP200 Handleiding

7 Januari 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd