IFM E20881 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor IFM E20881 (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
Montieren Sie zwei passende Nutsteine (nicht im Lieferumfang) in der Nut des
Aluprofils. Befestigen Sie den Halter (a) mit den beiden Schrauben (b) und schieben
Sie den Gewindewürfel (c) hinein. Drehen Sie die Schraube (d) in den Gewindewürfel
und kontern Sie die Schraube mit der Mutter (e).
Ziehen Sie nach Montage und Ausrichtung des Sensors die Schraube (g) fest.
Befestigen Sie den Haltewinkel (i) und ziehen Sie anschließend die Schraube (g)
soweit an, daß sich der Winkel noch drehen läßt.
Montieren Sie die beiden Schellenhälften (f) lose mit Hilfe der beiliegenden Schraube
(g) und Mutter (h).
Montageanleitung Montagesatz OL Aluprofil
Installation instructions mounting kit OL for aluminium profile
Notice de montage kit de montage OL pour profil aluminium
701483/00 02/00 ifm electronic gmbh . Friedrichstraße 1 . D 45128 Essen
1
2
3
4
Fasten the two parts of the mounting clamp (f) loosely by means of the screw (g)
and the nut (h) supplied.
Monter les deux parties de la bride de fixation (f) provisoirement à l'aide de la vis
(g) et de l'écrou (h) livrés.
Attach the mounting bracket (i) and then tighten the screw (g) in such a way that
the bracket can still be turned.
Fixer l'équerre de fixation (i) et ensuite visser la vis (g) de façon que l'équerre puisse
toujours être tournée.
Tighten the screw (g) fully after the sensor has been mounted and aligned.
Serrer la vis (g) définitivement après avoir monté et aligné la cellule.
Mount two suitable slot nuts (not supplied) into the slot of the aluminium profile.
Fasten the bracket (a) with the two screws (b) and insert the threaded cube (c). Turn
the screw (d) into the threaded cube and lock it with the nut (e).
Monter deux écrous appropriés (non fournis) dans la rainure du profil aluminium.
Fixer la bride (a) avec les deux vis (b) et insérer le cube fileté (c). Tourner la vis (d)
dans le cube fileté et la bloquer avec l'écrou (e).
(f)
(g)
(h)
(g)
(a)
(b)
(c)
(d)
(e)
(g)
(i)


Product specificaties

Merk: IFM
Categorie: Niet gecategoriseerd
Model: E20881

Heb je hulp nodig?

Als je hulp nodig hebt met IFM E20881 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd IFM

IFM

IFM DP4302 Handleiding

12 April 2024
IFM

IFM EVCB02 Handleiding

11 Maart 2024
IFM

IFM EVCB03 Handleiding

11 Maart 2024
IFM

IFM EVF666 Handleiding

11 Maart 2024
IFM

IFM TM4599 Handleiding

8 Januari 2024
IFM

IFM ZB0074 Handleiding

8 Januari 2024
IFM

IFM EVF661 Handleiding

8 Januari 2024
IFM

IFM IIP201 Handleiding

7 Januari 2024
IFM

IFM DP4200 Handleiding

7 Januari 2024
IFM

IFM IIP200 Handleiding

7 Januari 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd