IFi Audio ZEN CAN Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor IFi Audio ZEN CAN (1 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
INP UT
GAI N
Bas s
X
3
2
1
0dB
6dB 12dB
18dB
10. Balanced 4.4mm analogue input
This is a balanced analogue input.
11. Single-ended 3.5mm input
For connecting single-ended 3.5mm input.
12. RCA analogue input
This is an analogue input.
13. Balanced 4.4mm analogue output
This i s an analog ue ou tput v ia 4.4mm > XLR or other ba lanced
inte rconn ec ts. You cou ld us e this fo r an active speaker.
Tip: As ZEN CAN is balanced, this is the recommended output.
14. DC 5V power
Please connect ZEN CAN to the enclosed power supply,
ZEN CAN must ONLY be powered by 5 volts.
Tip: For best performance upgrade the enclosed power supply to a super-low
noise power adapter such as iFi iPower or iPower X.
Specifications
Input voltage: DC 5V/2.5A
AC 100 -240V, 50/60Hz (Power supply included)
Max Output:
Balanced: >15.1V/385 mW (@ 600 Ohm)
>11.0V/1890 mW (@ 64 Ohm)
>6.2V/1200 mW (@ 32 Ohm)
S-E: >7.6V/98 mW (@ 600 Ohm)
>7.4V/870 mW (@ 64 Ohm)
>7.2V/1600 mW (@ 32 Ohm)
THD & N:
Balanced: <0.006% (@ 360 mW/2.4V 16 Ohm)
S-E: <0.005% (@ 100 mW/1.27V 16 Ohm)
SNR:
Balanced: >120dBA (@ 15.2V)
S-E: >118dBA (@ 7.6V)
Max. Input:
Balanced: 7.4V RMS
RCA: 3.8V RMS
3.5mm: 1.92V RMS
Gain: 0dB, 6dB, 12dB and 18dB
Frequency Response: 10Hz - 200kHz (-3dB)
Power consumption: No Signal ~5W
Max Signal ~13W
Dimensions: 158 x 117 x 35 mm
6.2" x 4.6" x 1.4"
Net weight: 515 g (1.14 I bs)
Warranty period: 12 months
Specications are subject to change without notice.
2 4 6
Thank you for purchasing the CAN from ZEN series. The CA N is a
balanced audio amplifier.
1. Power switch
Press and hold button for two seconds to turn on.
2. Input channel switch
Use the button to choose between the following input options:
Input 1: RCA
Input 2: Single -ended 3.5mm
Input 3: Balanced 4.4mm
3. Gain selection: 0dB/6dB/12dB/18dB
Always start from 0dB and then increase the gain level to attain an
enjoyable and comfortable level of volume from the headphones.
Warning: at the outset do not use excessive gain, otherwise damage to hearing
or connected headphones may ensue. A MR/iFi audio is not responsible for any
damage/injury from misuse.
4. Analogue Volume Control
At normal listening levels, the volume control should be around the 12
o'clock position. Increase the gain level to enjoy a higher listening level.
5. Single-ended 6.3mm output
For connecting single-ended 6.3mm headphones. With single-ended
3.5mm headphones, connect with a 3.5mm to 6.3mm adapter.
6. Balanced 4.4mm analogue output
For connecting balanced 4.4mm headphones.
Tip: As ZEN C AN is balanced, we recommend the 4.4mm output.
7. XBass® LED
XBass® (On/Off ) was uniquely designed to extend bass response
to suit different headphones. It is a pure analogue signal circuit.
8. 3D® Matrix LED
The 3D® Matrix (on/off ) recreates a holographic sound field.
It is a pure analogue signal processing circuit designed for
listening to headphones as if one was listening to speakers. This
addresses the 'music inside the head' sensation, which makes
for unsettling listening.
Tip: Sonically-hindering DSP is NOT used for XBass® nor 3D® Matrix systems. They
use the highest-quality discrete components and operate purely in the analogue
domain. Hence all the clarity and resolution of the original music is retained.
Ver1.3
ifi-audio.com
1 9
DC 5V
LR
3
BAL ANCED
Technolo gy lic ensed f rom AMR- Audio, UK A ssem bled in C hina
CAN
BAL ANCED
Out put
Inp uts
2
SIN GLE
END ED
1
10 11 12 13 14
53 7 8
9. Settings
This button chooses between:
- Off
- 3D®
- XBass®
CAN


Product specificaties

Merk: IFi Audio
Categorie: Receiver
Model: ZEN CAN

Heb je hulp nodig?

Als je hulp nodig hebt met IFi Audio ZEN CAN stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver IFi Audio

Handleiding Receiver

Nieuwste handleidingen voor Receiver