ID-Tech EasyMag Handleiding

ID-Tech Niet gecategoriseerd EasyMag

Lees hieronder de 📖 handleiding in het Nederlandse voor ID-Tech EasyMag (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5

New EASYMAG

Magnetic Stripe Reader

USB/CDC Interface

Quickstart Manual

ID TECH

10721 Walker Street

Cypress, California 90630

(714) 761-6368

www.idtechproducts.com

80080505-001 Rev. A R04/06 #408

AGENCY APPROVED

Speciﬁ cations for subpart B of part 15 of FCC rule for a Class A

computing device.

LIMITED WARRANTY

ID TECH warrants to the original purchaser for a period of 24 months from

the date of invoice that this product is in good working order and free from

defects in material and workmanship under normal use and service. ID

TECH’s obligation under this warranty is limited to, at its option, replacing,

repairing, or giving credit for any product which has, within the warranty

period, been returned to the factory of origin, transportation charges and

insurance prepaid, and which is, after examination, disclosed to ID TECH’s

satisfaction to be thus defective. The expense of removal and reinstallation of

any item or items of equipment is not included in this warranty. No person,

ﬁ rm, or corporation is authorized to assume for ID TECH any other liabilities

in connection with the sales of any product. In no event shall ID TECH be

liable for any special, incidental or consequential damages to Purchaser or

any third party caused by any defective item of equipment, whether that

defect is warranted against or not. Purchaser’s sole and exclusive remedy for

defective equipment, which does not conform to the requirements of sales, is

to have such equipment replaced or repaired by ID TECH. For limited war-

ranty service during the warranty period, please contact ID TECH to obtain

a Return Material Authorization (RMA) number & instructions for returning

the product.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE.

THERE ARE NO OTHER WARRANTIES OR GUARANTEES, EXPRESS

OR IMPLIED, OTHER THAN THOSE HEREIN STATED. THIS PROD-

UCT IS SOLD AS IS. IN NO EVENT SHALL ID TECH BE LIABLE FOR

CLAIMS BASED UPON BREACH OF EXPRESS OR IMPLIED WAR-

RANTY OF NEGLIGENCE OF ANY OTHER DAMAGES WHETHER DI-

RECT, IMMEDIATE, FORESEEABLE, CONSEQUENTIAL OR SPECIAL

OR FOR ANY EXPENSE INCURRED BY REASON OF THE USE OR

MISUSE, SALE OR FABRICATIONS OF PRODUCTS WHICH DO NOT

CONFORM TO THE TERMS AND CONDITIONS OF THE CONTRACT.

DEFAULT SETTINGS TABLE

The EasyMag reader is shipped from the factory with the following default settings

already programmed:

Magnetic Track Basic Data Format

Track 1: <SS1><T1 Data><ES><CR>*

Track 2: <SS2><T2 Data><ES><CR>*

Track 3: <SS3><T3 Data><ES><CR>*

where: SS1(start sentinel track 1) = %

SS2(start sentinel track 2) = ;

SS3(start sentinel track 3) = ; for ISO, ! for CDL, % for AAMVA

ES(end sentinel all tracks) = ?

Start or End Sentinel: Characters in encoding format which come before the ﬁ rst

data character (start) and after the last data character (end), indicating the beginning

and end, respectively, of data.

Track Separator: A designated character which separates data tracks.

Terminator: A designated character which comes at the end of the last track of data,

to separate card reads.

LRC: Check character, following end sentinel.

CDL: Old California Drivers License format.

CR: Carriage Return.

*Note: The <CR> characters (shown above) between tracks 1 & 2 and 2 & 3

denote the default character for this position, the Track Separator position. The

<CR> characters shown for track 3 denotes the default character for this position,

the Terminator position.

contained herein is provided to the user as a convenience. While every effort

has been made to ensure accuracy, ID TECH is not responsible for damages

that might occur because of errors or omissions, including any loss of proﬁ t

or other commercial damage. The speciﬁ cations described herein were cur-

rent at the time of publication, but are subject to change at any time without

prior notice.

ID TECH is a registered trademark of International Technologies & Systems

Corporation. EasyMag and Value through Innovation are trademarks of

International Technologies & Systems Corporation.

Windows is a registered trademark of Microsoft Corporation. The USB (Uni-

Corporation, Intel Corporation, Microsoft Corporation, NEC Corporation.

RUNNING THE UTILITY

The reader is shipped from the factory with the “default conﬁ guration”

programmed. The default conﬁ guration has the least restrictive settings, thus

making it able to read all data of a standard encoded magnetic stripe card.

See the default settings table for details.

The conﬁ guration software can be downloaded from the ID TECH website.

From the website, download the Conﬁ guration Utility ZIP ﬁ le into a tempo-

rary ﬁ le folder on your local hard drive. Double click the downloaded self

extracting ﬁ le and follow the screen prompts to expand the Zip ﬁ le and run

the SETUP.EXE application.

The install wizard creates two new folders on the C: Drive. The new folder

“IDTECH” and a sub-folder “MagSwipe Conﬁ guration Utility” are created in

the “Program Files” folder.

At the ﬁ nish of the installation process, an “MagSwipe Conﬁ guration Util-

ity” menu is installed in the programs folder of the Start menu. Connect

the reader to the host computer and ensure it is getting power. Point to the

“MagSwipe Conﬁ guration Utility” menu and click on the IDT icon.

The utility will start at the Home Page with a menu on the left border. Point

and click on the menu items as needed. For information on using the utility,

point and click the HELP menu selection.

Product specificaties

Merk:	ID-Tech
Categorie:	Niet gecategoriseerd
Model:	EasyMag
Gewicht:	226.8 g
Snoerlengte:	1.5 m
LED-indicatoren:	Ja
Interface:	RS-232
Temperatuur bij opslag:	-30 - 70 °C
Compatibele besturingssystemen:	Windows 98/2000/XP
Stroomverbruik:	40 mA
Afmetingen (B x D x H):	32 x 130.6 x 41 mm
Operating voltage:	5 V
Bedrijfstemperatuur (T-T):	0 - 55 °C
Scansnelheid (max):	76.2 mm/sec