Ices IFS-300 Handleiding

Ices Snijmachine IFS-300

Lees hieronder de 📖 handleiding in het Nederlandse voor Ices IFS-300 (22 pagina's) in de categorie Snijmachine. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/22
FOOD SLICER
Model: IFS-300
Instruction Manual
220-240V~50Hz, 100W
KNOW YOUR FOOD SLICER
Your food slicer is suitable for cutting bread, all kinds of ham sausage cheese vegetables etc. 、 、 、 、
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed including the 、
following:
1. Read all instructions.
2. Close supervision is necessary when a ny appliance is used near children.
3. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
4. Avoid contacting moving parts. Never feed food by hand. always use completely assembled slicer with
food carriage and food pusher.
5. To protect against risk of electrical shock, do not put power unit in water or other liquid. To protect
against risk of electrical shock, do not put power unit in water or other liquid.
6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is
dropped or damaged in any manner. Return appliance to the place of purchase for a replacement.
7. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid to a hazard.
8. The use of attachments not recommended or sold by the appliance manufacturer may cause fire,
electric shock or injury.
9. Do not operate the machine more than 10 minutes. The motor may be overheat. Turn off switch & let
it rest for at least 30 minutes to cool down the motor.
10. Do not use the appliance outdoors.
11. Do not let cord hang over edge of table or counter or touch hot surfaces.
12. Blade is sharp. Hold only by blade lock. Handle carefully when cleaning.
13. Do not use the appliance for other than its intended use.
14. This appliance must be used with the sliding feed table and the piece holder in position unless this is
not possible due to the size or shape of the food."
15. Switch off the appliance before changing accessories or approaching parts which move in use.
16. This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
17. Children should be supervised to ensure that they do not play with the appliance.
EN-1
1 Serrated Blade ）
2 Safety Button ）
3 On/Off Button ）
4 Power Cord ）
5 Blade Lock ）
6 Thickness Guide ）
7 Thickness Direction ）
8 Piece Holder ）
9 Platform ）
10 Sliding Feed Table ）
11 Thickness adjusting knob ）
PREPARING TO SLICE
1. wrap cord from bottom of slicer, and slide into slot, Position slicer on a clean, Un
dry and smooth surface. Fold down platform, remove food collection tray from its storage position and
put it under the blade at the back the food slicer. to
2. Place food carriage on platform. The ridge on bottom of food carriage should fit into slot of platform
properly. Move food carriage back and forth a few times to ensure movement.
3. Place food pusher on back of food carriage.
4. Select the required slice thickness by turning thickness adjusting knob clockwise for thicker slices and
counter- clockwise for thinner slices.(fig. 1)
OPERATION
CAUTION:ALWAYS USE FOOD CARRIAGE AND FOOD PUSHER
1. Plug into 220-240 volt AC outlet.
2. Place food to be sliced on food carriage and press it against thickness guide. Then pull food carriage
toward you by left hand.(fig. 2)
fig.1 fig.2
3. In order to start the appliance press safety button by right hand thumb and ON/OFF-button by index
finger and keep both depressed.
4. When blade is rotating; keep thumb protected behind thumb guard when hold food pusher. Slice food
carriage forward toward blade. Move tray back and forth steadily. Keep food
gently pressed against guide for even slices.
5. When finished slicing , unplug unit. For safety and blade protection when storing, turn thinness
adjusting knob to align thickness guide with blade.
CLEANING
UNPLUG SLICER FROM OUTLET
All slicing parts remove for thorough cleaning. Wash with a soft cloth sponge and a mild soap or a
spray cleaner. Rinse and dry.
Never use steel wool or scouring powder on any part of slicer. Do not wash any part of slicer in
dishwasher.
Motor is concealed in housing. Newer submerge in water.
Motor never needs oiling.
For easier cleaning, remove all parts in order shown. Wash as directed. Replace in reverse sequence.
EN-2

Product specificaties

Merk: Ices
Categorie: Snijmachine
Model: IFS-300

Heb je hulp nodig?

Als je hulp nodig hebt met Ices IFS-300 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Snijmachine Ices

Ices

Ices IFS-300 Handleiding

30 Maart 2023
Ices

Ices IFS-400 Handleiding

11 November 2022

Handleiding Snijmachine

Nieuwste handleidingen voor Snijmachine

Graef

Graef Classic C95 Handleiding

10 April 2024
Graef

Graef Master M95 Handleiding

10 April 2024
Graef

Graef Sliced Kitchen SKS320 Handleiding

27 Maart 2024
Graef

Graef Sliced Kitchen SKS300 Handleiding

27 Maart 2024
Gorenje

Gorenje R708A Handleiding

14 Maart 2024
RGV

RGV AUSONIA 220 Handleiding

13 Maart 2024
Gorenje

Gorenje R902A Handleiding

1 Maart 2024
Hyundai

Hyundai FS801 Handleiding

24 Februari 2024
Tescoma

Tescoma Handy 643560 Handleiding

15 Februari 2024
Waves

Waves SM-1062221 Handleiding

30 Januari 2024