Ibiza Sound LED-DERBY Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Ibiza Sound LED-DERBY (21 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/21
©Copyright LOTRONIC 2012 - 1 LED DERBY
LED Derby Light effect
Code 15-1371
User Manual
Manuel d’Utilisation
Bedienungsanleitung
Handleiding
Manual de utilizare
Instrukcja obsługi
Manual de Instruções
Navodila za uporabo
©Copyright LOTRONIC 2012 - 2 LED DERBY
1. Safety Instructions
• Please keep this User Manual for future reference. If you sell the unit to another user, be sure that he also receives
this instruction booklet.
• Unpack and check the unit carefully that it has not been damaged during transport before using the unit.
• Before operating, ensure that the voltage and frequency of power supply match the power requirements of the unit.
• It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.
• The unit is for indoor use only in a dry location.
• The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent surfaces. Be sure that
no ventilation slots are blocked.
• Disconnect mains power before fuse replacement or servicing.
• Replace fuse only with the same type.
• Make sure there are no inflammable materials close to the unit during operation.
• Use safety cable when fixing this unit.
• In the event of serious operating problem, stop using the unit immediately.
• Never try to repair the unit by yourself. Repair carried out by unskilled people can lead to damage or malfunction.
Please contact the nearest authorized technical assistance center and always use the same type of spare parts.
• Do not touch any wires during operation as high voltage might be causing electric shock.
2. Features
The LED Derby alone unitcan be DMX512 controlled -or work as a stand . Several units can be linked together in
master/slave mode or perform the built- in light show program triggered by music.
3. Specifications
Supply Voltage: ................................................................................................ 2 -2420 0Vac 50/60HZ
P ower: ........................................................................................................................................ 3 0W
Light source: ............................................................................................. 2pcs 10 x Watt RGBW LED
Fuse: .............................................................................................................................................. 3A
Control Signal: .......................................................................................................... DMX512 signal
Channel: ........................................................................................................................ 8 x Channels
Operating modes: ...............................................DMX512, Auto-run, Sound Control, Master- Slave
Dimensions: ....................................................................................................... 220 x 275 x 235mm
Weight: .....................................................................................................................................2.1kg
4. Installation
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid
vibration and slipping while operating. Always ensure that the structure to which you are attaching the unit is secure and
able to support a weight of 10 times of the unit’s weight. Also always use a safety cable that can hold 12 times the weight
of the unit when installing the fixture.
The equipment must be fixed by of people and where nobody can professionals at a place where is out of the reach pass
by or under it.
GB
©Copyright LOTRONIC 2012 - 3 LED DERBY
5. How To Control The Unit
A. Digital Display operation
Switch the unit on. Press MANU to enter into the main menu.
Press UP/DOWN button to select the submenu and press ENTER to confirm.
A001→ A512 DMX512 signal address
AXX A11 A11 → → → Red on light mode
A19→ Colour changing from fast to slow
A21 A21→ → Green-on light mode
A29→ Colour changing from fast to slow
A31 A31→ → Blue- on light mode
A39→ Colour changing from fast to slow
A41 A41→ → 3- colours jumping to change pattern
A49→ Colour changing from fast to slow
A51 A51→ → 7 colours jumping to change patterns
A59→ Colour changing from fast to slow
A61 A61→ → Fade in and fade out mode 1
A69→ Colour changing from fast to slow
A71 A71→ → Strobe mode 2
A79→ C olour changing from fast to slow
So1 SO1→ → Sound control to change colour, motor rotation
So2 SO2→ → Sound control white colour, motor rotation
SPD SPD→ -0 →Speed stop
SPD-9 →Speed adjustment from fast to slow
B. Master/Slave mode
When no DMX controller is connected, any unit can work as a master in auto or sound controlled mode. Set the DMX
address of the slave units to 1.
C. DMX 512 Configuration
8CH A 001------A512
Channel 1 0 ~255 Dimmer( )0 dark → 255 light
Channel 2 0 ~255 From dark to bright
Channel 3 0 ~255 From dark to bright
Channel 4 0 ~255 From dark to bright
Channel 5 0-9 Strobe OFF
10 255- Strobe from slow to fast
Channel 6
0-9 Motor stop
10- 127 Motor rotates in forward direction, fast to slow
128 255- Motor rotates in reverse direction, slow to fast
Channel 7 1- 255 Length of line
Channel 8 0- 49 Standby


Product specificaties

Merk: Ibiza Sound
Categorie: Verlichting
Model: LED-DERBY

Heb je hulp nodig?

Als je hulp nodig hebt met Ibiza Sound LED-DERBY stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Verlichting Ibiza Sound

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting