Husqvarna K 760 Handleiding

Husqvarna Zaagmachine K 760

Lees hieronder de 📖 handleiding in het Nederlandse voor Husqvarna K 760 (28 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
EE
EEnn
nngg
ggll
llii
iiss
sshh
hh
K 760
Operator’s manual
Please read the operator’s manual carefully and make sure
you understand the instructions before using the machine.
It is the owner’s responsibility to make sure that any
person who use this power cutter have read this manual!
2 – English
KEY TO SYMBOLS
Symbols on the machine:
WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator’s manual
carefully and make sure you understand
the instructions before using the machine.
Wear personal protective equipment. See
instructions under the heading ”Personal
protective equipment”.
WARNING! Dust forms when cutting, this
can cause injuries if inhaled. Use an
approved breathing mask. Avoid inhaling
petrol fumes and exhaust fumes. Always
provide for good ventilation.
WARNING! Kickbacks can be sudden,
rapid and violent and can cause life
threatening injuries. Read and understand
the instructions in the manual before using
the machine.
WARNING! Sparks from the cutting blade
can cause re in combustible materials
such as: petrol (gas), wood, dry grass etc.
You will nd the following labels on your
power cutter:
The Emissions Compliance Period referred to on the
Emission Compliance label indicates the number of operating
hours for which the engine has been shown to meet Federal
emissions requirements.
Other symbols/decals on the machine refer to special
certication requirements for certain markets.
Explanation of warning levels
The warnings are graded in three levels.
WARNING!
CAUTION!
NOTICE!
!
WARNING! Used if there is a risk of serious
injury or death for the operator or damage to
the surroundings if the instructions in the
manual are not followed.
!
CAUTION! Used if there is a risk of injury to
the operator or damage to the surroundings
if the instructions in the manual are not
followed.
NOTICE! Used if there is a risk of damage to materials or
the machine if the instructions in the manual are not
followed.
The engine exhaust from this product
contains chemical known to the State
of California to cause cancer, birth
defects or other reproductive harm.
English – 3
CONTENTS
Contents
KEY TO SYMBOLS
Symbols on the machine: ............................................. 2
Explanation of warning levels ...................................... 2
CONTENTS
Contents ...................................................................... 3
PRESENTATION
Dear customer! ............................................................ 4
Features ....................................................................... 4
PRESENTATION
What is what on the power cutter - K 760? .................. 5
What is what on the power cutter - K 760 Rescue? ..... 6
MACHINE´S SAFETY EQUIPMENT
Gener 6al ........................................................................
CUTTING BLADES
Gener 8al ........................................................................
Abrasive blades ........................................................... 8
Diamond blades ........................................................... 9
Toothed blades ............................................................. 9
Transport and storage .................................................. 9
ASSEMBLING AND ADJUSTMENTS
Gener 10al ........................................................................
Checking the drive shaft and flange washers .............. 10
Fitting the cutting blade ................................................ 10
Guard for the blade ...................................................... 10
Disengaging OilGuard ................................................. 10
FUEL HANDLING
Gener 11al ........................................................................
Fuel .............................................................................. 11
Fueling ......................................................................... 12
Transport and storage .................................................. 12
OilGuard ...................................................................... 12
OPERATING
Protective equipment ................................................... 13
General safety precautions .......................................... 13
Transport and storage .................................................. 15
STARTING AND STOPPING
Before starting ............................................................. 16
Starting ........................................................................ 16
Stopping ....................................................................... 17
MAINTENANCE
Gener 18al ........................................................................
Maintenance schedule ................................................. 18
Cleaning ....................................................................... 19
Functional inspection ................................................... 19
TECHNICAL DATA
Technical data .............................................................. 23
Cutting equipment ........................................................ 23
FEDERAL EMISSION CONTROL WARRANTY
STATEMENT
YOUR WARRANTY RIGHTS AND OBLIGATIONS ..... 24

Product specificaties

Merk: Husqvarna
Categorie: Zaagmachine
Model: K 760

Heb je hulp nodig?

Als je hulp nodig hebt met Husqvarna K 760 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Zaagmachine Husqvarna

Husqvarna

Husqvarna 120iTK4-PH Handleiding

6 Juni 2023
Husqvarna

Husqvarna 327PT5S Handleiding

28 Mei 2023
Husqvarna

Husqvarna 525PT5S Handleiding

24 Mei 2023
Husqvarna

Husqvarna T540i XPG Handleiding

18 Mei 2023
Husqvarna

Husqvarna 455 Rancher II Handleiding

17 Mei 2023
Husqvarna

Husqvarna 334T Handleiding

17 Mei 2023
Husqvarna

Husqvarna Madsaw 525iDEPS Handleiding

17 Mei 2023
Husqvarna

Husqvarna 140 Handleiding

16 Mei 2023
Husqvarna

Husqvarna 576XPG Handleiding

11 Mei 2023
Husqvarna

Husqvarna 460 R Handleiding

7 Mei 2023

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine

Worx

Worx Nitro WX542.9 Handleiding

26 April 2024
Fieldmann

Fieldmann FZP 25410-B Handleiding

15 April 2024
Milwaukee

Milwaukee M18 BJS Handleiding

10 April 2024
Rona

Rona Standard Plus-C Handleiding

10 April 2024
Rona

Rona Profi-C Handleiding

10 April 2024
Milwaukee

Milwaukee SCS 65 Q Handleiding

10 April 2024
Milwaukee

Milwaukee M12 BS Handleiding

10 April 2024
Milwaukee

Milwaukee M18 FMCS66 Handleiding

10 April 2024
Milwaukee

Milwaukee M18 BSX Handleiding

10 April 2024
Bavaria By Einhell

Bavaria By Einhell BFS 800E Handleiding

9 April 2024