Husqvarna 362M18 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Husqvarna 362M18 (17 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 119 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/17
2 - English
Safety first
Instructions contained in warnings within this
manual and warning seals marked with a
symbol on the product concern critical points
which must be taken into consideration to
prevent possible serious bodily injury, and for
this reason you are requested to read all such
instructions carefully and follow them without fail.
Safety
Safety ......................................................................2
Warning labels on the machine ...............................3
Symbols on the machine .........................................3
What is what? .........................................................3
Technical data .........................................................4
Safety Precautions ..................................................5
Assembly ................................................................8
Fuel .........................................................................9
Operation ..............................................................10
Maintenance .........................................................12
Storage .................................................................14
Disposal ................................................................14
Notes on types of warnings
WARNING
Instructions labeled as shown above, concern
critical steps or procedures which must be
followed in order to prevent accidents which
could lead to serious bodily injury or death.This
mark is used to indicate instructions which must
be followed without exception.
IMPORTANT
Instructions labeled as shown above concern
steps or procedures which, if not followed
correctly, could lead to mechanical failure,
breakdown, or damage.
NOTE
Used to label supplementary instructions
designed to provide hints or directions useful in
the use of the product.
Contents
English - 3
What is what?
(1) Clamp A
(2) Flexible hose
(3) Clamp B
(4) Solution tube
(5) Swivel joint
(6) Bent pipe
(7) Mist nozzle
(8) Intermediate valve
(xed with Clamp B)
(9) Clip
(10) Clamp C
Warning labels on the machine
(1) (2) (4) (5)
(1) Read the operator’s manual carefully and
make sure you understand the instructions
before using the machine.
(2) Wear a protective mask, eye and ear
protection.
(3) Wear foot protection.
(4) Wear gloves.
(5) WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or fatal
injury to the operator or others.
Symbols on the machine
The port to refuel the “MIX
GASOLINE”
Position: FUEL TANK CAP
The direction to close the choke
Position: AIR CLEANER COVER
The direction to open the choke
Position: AIR CLEANER COVER
(3)
For safe operation and maintenance, symbols
are carved in relief on the machine. According
to these indications, be careful not to make a
mistake.
IMPORTANT
If the warning label peels off or becomes soiled
and impossible to read, you should contact the
dealer from which you purchased the product to
order new labels and afx them in the required
location(s).


Product specificaties

Merk: Husqvarna
Categorie: Niet gecategoriseerd
Model: 362M18

Heb je hulp nodig?

Als je hulp nodig hebt met Husqvarna 362M18 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Husqvarna

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd