Hunter Hepburn 19179 Handleiding

Bekijk gratis de handleiding van Hunter Hepburn 19179 (2 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 2 mensen en kreeg gemiddeld 4.7 sterren uit 8 reviews. Heb je een vraag over Hunter Hepburn 19179 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Here are the

tools you’ll

need to

complete your

installation:

Estas son las

herramientas

que usted

necesitará para

completar su

instalación:

Voici les outils

dont vous

aurez besoin

pour réaliser

l’installation:

Ladder

Escalera

Échelle

Pliers

Alicates

Pince

Wire Strippers

Pelacables

Pince à dénuder

INSTALLATION INSTRUCTIONS

INSTRUCCIONES DE INSTALACIÓN/ INSTRUCTIONS D’INSTALLATION

For Models:

Para los Modelos:

Pour les Modèles:

READ AND SAVE THESE INSTRUCTIONS

These instructions are provided for your safety. It

is very important that they are read carefully and

completely before beginning installation of the

lighting xture.

LEA Y GUARDE ESTAS INSTRUCCIONES

Estas instrucciones se proporcionan para su

seguridad. Es muy importante leerlas detenid-

amente y completamente antes de comenzar la

instalación de la lámpara.

LISEZ ET CONSERVEZ CES INSTRUCTIONS

Ces instructions sont fournies pour votre sécurité.

Il est très important de les lire attentivement dans

leur intégralité avant d’entreprendre l’installation

du luminaire.

Fixture weight ±2 lbs:

Peso ±2 lb:

Poids xe ±2 lbs:

•

WARNING

• All wiring must be in accordance with national

and local electrical codes ANSI/NFPA 70. If you

are unfamiliar with wiring or in doubt, consult a

qualied electrician.

• To avoid possible electrical shock, before

installing your light xture, disconnect the power

by turning off the circuit breakers to the outlet box

associated with the wall switch location.

• The lighting xture must be grounded. If the

ground wire for the installation site is not present,

immediately STOP installation and consult a

qualied electrician.

•

• Todo el cableado debe realizarse de acuerdo con

los códigos eléctricos locales y nacionales ANSI/

NFPA 70. Si no está familiarizado con el cableado,

o si tiene duda, consulte a un electricista calicado.

• Para evitar una posible descarga eléctrica, antes

de instalar su lámpara, desconecte la energía

apagando los interruptores automáticos (breakers)

que alimentan la caja de salida asociada con la

ubicación del interruptor de pared.

ADVERTENCIA

• L’appareil d’éclairage doit être mis à la terre.

Si le l de terre du lieu d’installation n’est pas

présent, ARRÊTEZ immédiatement l’installation et

consultez un électricien qualié.

•

AVERTISSEMENT

•

Tout le câblage doit être conforme aux codes

électriques nationaux et locaux en vigueur et à la

norme ANSI/NFPA70. Si vous n'avez pas l'habitude

de faire ce câblage ou en cas de doute, adressez-

vous à un électricien qualié.

• Pour éviter tout choc électrique, avant d’installer

le luminaire, coupez le courant en éteignant les

disjoncteurs de la boîte électrique associée à

l’interrupteur mural.

•

Le luminaire doit être mis à la terre. Si le l

de terre du lieu d’installation n’est pas présent,

ARRÊTER immédiatement l’installation et

consulter un électricien qualié.

©2020 Hunter Fan Co.

Light Vanity

Luz Decorativa de Pared

Lumière Vanité

Part #/Pieza #/Pièce #

Hardware Service Kit/Kit De Mantenimiento Del Equipo/Trousse De

Maintenance Quincaillerie

Glass/Domo De Vidrio/Verre

Part #/Pieza #/Pièce #

ENGLISH

Finish/Finish/FiniModel/Modelo/Modèle

Type/Tipo/TypeModel/Modelo/ Modèle

Screwdriver

Destornilladore

Tournevis

H

I

J

K

L

A

B

CD

E

H

I

J

L

K

G

F

19179

19180

Hepburn

KC04401864

KC04401214

Painted Modern Brass/

Bronce Moderno Pintado/

Laiton Moderne Peint

Brushed Nickel/Níquel Pulido/

Nickel Brossé

19179

19180

KC09401045

Cased White Glass/Pantalla de

Vidrio Blanco/Verre Blanc

19179

19180

ML059

r_121820

7.25 lbs(3.29 kg)

4

4

4

FINISHING THE INSTALLATION

CONNECTING THE WIRES

PREPARING FOR INSTALLATION

CLEANING TIPS

Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light

and wipe down the xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.

Carefully remove all contents from the carton. Shut off the power at the circuit breaker and completely remove the old

xture from the ceiling, including the old mounting bracket. Remove the new mounting bracket assembly from the

bag. Then remove decorative nuts (G) from mounting screws (A). Mounting plate (B) contains several pairs of threaded

holes. Find the pair of holes that matches the spacing on the holes on the xture’s canopy. Place the mounting plate (B)

over the junction box so that mounting screws (A) and nuts (C) are visible. Pull the house wires through the center of

mounting plate (B). Secure mounting plate (B) to the junction box by tightening the screws (D). Adjust the position of

mounting screws (A) so that mounting screws (A) can be exposed 5-6 mm after passing through the backplate (F). Once

the ideal position of mounting screws (A) has been conrmed, tighten nuts (C) on mounting screws (A) on the front of

the mounting plate to ensure that mounting screws (A) are in place.

Have a helper support the xture’s weight while completing the

wiring. Attach the xture’s wires to the power supply wires from the

junction box. Connect black to black (Live); white to white (grounded);

grounding to grounding (green or copper). Twist the ends of the wire

pairs together. Then, twist on a wire connector. Make sure all twists are

in the same direction. Loop xture’s ground wire around grounding

screw (E) and tighten. If there is no ground wire (green or copper) from

the junction box, contact a qualied electrician.

Place the xture’s backplate (F) over the mounting screws (A) so the threads protrude through the holes on the front of

the backplate. Tightly screw the decorative nuts (G) onto the mounting screws (A) until the backplate (F) of the xture

is snugly against the wall. Install light bulb (not included) in accordance with the xture’s specications. Do not exceed

the recommended wattage.

Unscrew ring (H) from threads (K) and move the cover (I) back to keep a distance with metal bracket (J). Put the metal

bracket (J) into the glass (L) and adjust until both ends are in contact with the glass (L) and the at base is parallel with

the glass opening. Then tighten the ring (H) on threads (K) to secure the cover (I) and glass (L). Repeat for each xture.

Remove the glass before maintenance. Your installation is now complete. Turn on the power and test the xture.

Product specificaties