Hughes & Kettner Metal Master Handleiding
Pagina's 1 Niet gecategoriseerd
Bekijk de handleiding van Hughes & Kettner Metal Master gratis online of download de PDF. 48 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag
Hughes & Kettner Metal Shredder / Metal Master
The controls, switches, jacks etc. of the Metal Shredder (U.S. name)/Metal Master
(European name) are nearly identical to those of the Cream Machine and Blues
Master/Crunch Master. The instructions for using the Metal Shredder/Metal Master
are therefore the same, with the following exceptions:
•The Metal Shredder/Metal Master utilizes a two-stage tube preamplifier. The two
stages can be controlled separately by means of the GAIN 1 and GAIN 2 knobs.
An infinite number of sound combinations can be attained depending on the
relationship between these two knobs, from clean or crunch to heavy overdrive.
•The MID control takes its place in the signal chain before the tube stages and its
main purpose is to adapt to the characteristics of the guitar and pickups.
•For the sake of avoiding undesirable distortion in the bass or treble range, the
BASS and TREBLE controls are positioned in the signal chain after the tube
stages.
•The Metal Shredder/Metal Master has a separate headphone jack (PHONES). This
jack is turned ON or OFF with the back panel switch marked Phones.
•The Phones switch serves a second function as well. At the same time that it
switches the headphone jack on, it also applies CABINET SIMULATOR circuitry
(like in the Hughes & Kettner Red Box) to the signal appearing at the SPEAKER
OUT jack. This will give hi- speakers or full-range P.A. speakers connected to
this jack the sound character of a guitar loudspeaker. (Warning! If you connect
hi-fi, full-range speakers to the SPEAKER OUT jack, make sure you use the
Cabinetulator circuitry by pressing in the red Phones switch, or else you
might blow your speakers’ high-frequency drivers out!)
•The TUBE AMP VOLUME control determines the overall output level of the Metal
Master/Metal Shredder at the SPEAKER OUT, but not does affect the Bypass
signal.
•The Metal Master/Metal Shredder has an integral 4½-watt solid-state power amp
for connecting a guitar loudspeaker cabinet or – in the manner described above –
a hi-fi speaker cabinet.
Bypass function
As with the Cream Machine and the Blues Master/Crunch Master, the BYPASS output
signal can be used with or without the Cabinet Simulator circuitry, or switched off
completely. In contrast to the Cream Machine and Blues Master/Crunch Master, the
internal switches, which set how Bypass works, are as follows:
Product specificaties
| Merk: | Hughes & Kettner |
| Categorie: | Niet gecategoriseerd |
| Model: | Metal Master |
Heb je hulp nodig?
Als je hulp nodig hebt met Hughes & Kettner Metal Master stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Hughes & Kettner
Hughes & Kettner Edition Tube 20th Anniversary Handleiding Hughes & Kettner Switchblade 50 Combo Handleiding Hughes & Kettner Redbox Pro Handleiding Hughes & Kettner Tube Rotosphere MKII Handleiding Hughes & Kettner Quantum QC 421 Handleiding Hughes & Kettner BassForce L Handleiding Hughes & Kettner Switchblade 100 TSC Head Handleiding Hughes & Kettner Matrix 100 Combo Handleiding
Populair in Niet gecategoriseerd
Hughes & Kettner BassKick 111 Handleiding Hughes & Kettner Access Handleiding Hughes & Kettner CF200 Handleiding