Hubbell J645T Handleiding

Hubbell Heater J645T

Lees hieronder de 📖 handleiding in het Nederlandse voor Hubbell J645T (8 pagina's) in de categorie Heater. Deze handleiding was nuttig voor 65 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
1
OPERATING AND MAINTENANCE
MANUAL FOR
ELECTRIC BOOSTER HEATER
ELECTRIC HEATER COMPANY
BASE MODEL “ J ”
UM ANSI/NSF5
201 Edition7
2
HUBBELL
ELECTRIC HEATER COMPANY
45 SEYMOUR STREET
P.O. BOX 288
STRATFORD, CT 06615
PHONE: (203) 378-2659
FAX: (203) 378-3593
INTERNET: http://www.hubbellheaters.com
-- IMPORTANT --
Always reference the full model number and serial number when calling the factory.
WARNING / CAUTION
1. Tank is to be completely filled with water and all air is to be vented before energizing.
2. Due to the rigors of transportation, all connections should be checked for tightness before
heater is placed in operation.
3. Safety relief valve must be installed in tapping provided.
4. The refractory material used in heating elements may absorb some moisture during
transit, periods of storage, or when subjected to a humid environment. This moisture
absorption results in a cold insulation resistance of less than ( ) megohms. If thisone 1
heater has been subjected to the above condition, each heating element must be checked
for insulation resistance before energizing. Contact the factory for a replacement element.
5. KEEP AWAY FROM LIVE ELECTRICAL CIRCUITS.
Do not perform any maintenance, make any adjustments, or replace any components
inside the control panel with the high voltage power supply turned on. Under certain
circumstances, dangerous potentials may exist even when the power supply is off. To
avoid casualties, always turn the power supply safety switch to off, turn the charge or
ground the circuit before performing any maintenance or adjustment procedure.
6. The unit is designed to operate at pressure not more than 150 psi.
7. Generalized instructions and procedures cannot anticipate all situations. For this reason,
only qualified installers should perform the installations. A qualified installer is a person
who has licensed training and a working knowledge of the applicable codes, tools,
equipment, and methods necessary for safe installation of an electric resistance water
heater. If questions regarding installation arise, check your local plumbing and electrical
inspectors for proper procedures and codes. If you cannot obtain the required
information, contact the company.
8. Water Quality Requirements – Recommended water hardness is 4 to 6 grains of
hardness per gallon (GPG). Water hardness above 6 GPG should be treated by a water
conditioner (water softener or in-line treatment). Water hardness below 4 GPG also
requires treatment to reduce potential corrosion. Excessive GPG will result in higher
operating and maintenance costs and will reduce product longevity. Chlorides must
not exceed 50 parts per million (ppm). Excessive chlorides will result in metallic
corrosion and will reduce product longevity. Water treatment has been shown to
reduce costs associated with de-liming the booster as well as reducing metallic
corrosion. Product failure caused by these conditions is not covered under warranty.
See warranty for complete details.
9. This water heater is not intended for space heating applications.
10. The water heater is factory set at 185°F for booster water heating applications. This
results in the possibility of a scalding water injury. A full thickness skin burn can
occur in less than one second of exposure to water at this temperature.
4
SECTION I - GENERAL DESCRIPTION AND CONSTRUCTION
GENERAL DESCRIPTION
This book describes a packaged electric booster heater that is typically used to provide 180°F
sanitizing rinse water. The complete assembly consists of the storage tank, immersion electric
heating element(s), electronic control module, safety relief valve, magnetic contactor(s), and
any other required electrical operating control. Optional equipment may be supplied with your
unit. Please consult the product packing list for details specific to your assembly. The unit is
factory assembled, insulated, jacketed, wired, tested, and ready for electrical and plumbing
service connections.
CAPACITY
Model
Storage
Capacity
(gallons)
kW
40°F
Rise
(GPH)
70°F
Rise
(GPH)
Model
Storage
Capacity
(gallons)
kW
40°F
Rise
(GPH)
70°F
Rise
(GPH)
J32.9 3 2.9 30 17 J161 16 1 10 5
J35.7 3 5.7 58 33 J161.5 16 1.5 15 8
J39.9 3 9.9 101 58 J162 16 2 20 11
J310.4 3 10.4 107 61 J163 16 3 30 17
J311.4 3 11.4 117 67 J164 16 4 41 23
J411 4 11.4 117 67 J166 16 6 62 35
J415 4 15 154 88 J167 16 7 72 41
J427 4 27 277 158 J169 16 9 92 53
J61 6 1 10 5 J1612 16 12 123 70
J61.5 6 1.5 15 8 J1613 16 13.5 138 79
J62 6 2 20 11 J1615 16 15 154 88
J63 6 3 30 17 J1618 16 18 185 105
J64 6 4 41 23 J1624 16 24 246 141
J65 6 5 51 29 J1627 16 27 277 158
J66 6 6 62 35 J1630 16 30 308 176
J67 6 7 72 41 J1636 16 36 369 211
J69 6 9 92 53 J1639 16 39 400 228
J610 6 10.5 108 62 J1640 16 40.5 415 237
J612 6 12 123 70 J1645 16 45 461 264
J613 6 13.5 138 79 J1654 16 54 554 316
J615 6 15 154 88 J1658 16 58.5 600 343
J618 6 18 185 105 J1664 16 64 656 375
J624 6 24 246 141 J1666 16 66 677 387
J627 6 27 277 158 J1668 16 68 697 398
J630 6 30 308 176 J1679 16 79 810 463
J636 6 36 369 211 J1681 16 81 830 474
J639 6 39 400 228 J1685 16 85 871 498
J640 6 40.5 415 237 J1686 16 86 882 504
J645 6 45 461 264 J1688 16 88 902 515
J654 6 54 554 316 J1690 16 90 923 527
J658 6 58.5 600 343

Product specificaties

Merk: Hubbell
Categorie: Heater
Model: J645T

Heb je hulp nodig?

Als je hulp nodig hebt met Hubbell J645T stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Heater Hubbell

Hubbell

Hubbell J1610S Handleiding

9 Juli 2023
Hubbell

Hubbell J1658T4 Handleiding

8 Juli 2023
Hubbell

Hubbell J610T4 Handleiding

7 Juli 2023
Hubbell

Hubbell J66T Handleiding

7 Juli 2023
Hubbell

Hubbell J167T Handleiding

6 Juli 2023
Hubbell

Hubbell J65T4S Handleiding

6 Juli 2023
Hubbell

Hubbell J1639R Handleiding

5 Juli 2023
Hubbell

Hubbell J630T Handleiding

3 Juli 2023
Hubbell

Hubbell J1636T Handleiding

2 Juli 2023
Hubbell

Hubbell J67RS Handleiding

1 Juli 2023

Handleiding Heater

Nieuwste handleidingen voor Heater

Mestic

Mestic MKK-250 Handleiding

26 April 2024
Mestic

Mestic MKK-400 Handleiding

26 April 2024
Delonghi

Delonghi DCH7093ERBCA Handleiding

25 April 2024
Delonghi

Delonghi MDHS12 Handleiding

25 April 2024
Delonghi

Delonghi HFX30C15.WCA Handleiding

25 April 2024
Delonghi

Delonghi MDHU12 Handleiding

25 April 2024
Delonghi

Delonghi HFX12D03 Handleiding

25 April 2024
Delonghi

Delonghi Dragon 4 TRD40615 Handleiding

25 April 2024
Thermotec

Thermotec AeroFlow Midi 1950w Handleiding

18 April 2024
Everdure

Everdure NPE2400W Handleiding

17 April 2024