HQ Power VDL25BM Handleiding

HQ Power Effect machine VDL25BM

Lees hieronder de 📖 handleiding in het Nederlandse voor HQ Power VDL25BM (20 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20

VDL25BM 1 VELLEMAN

VDL25BM – BUBBLE MACHINE

1. Introduction & Features

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm

the environment.

Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised

company for recycling.

This device should be returned to your distributor or to a local recycling service.

Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for buying the VDL25BM! Please read the manual thoroughly before bringing this device into service.

If the device was damaged in transit, don't install or use it and contact your dealer.

2. Safety Instructions

• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer

will not accept responsibility for any ensuing defects or problems.

• A qualified technician should install and service this device.

• Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the device

against damage by leaving it switched off oom temperature. until it has reached r

• This device falls under protection class I. It is therefore essential that the device be earthed. Have a qualified

person carry out the electric connection.

• Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.

• Do not crimp the power cord and protect it against damage. Have an authorised dealer replace it if necessary.

• Disconnect the device from the mains to clean it or when it is not in use. Handle the power cord by the plug only.

• Never leave the bubble machine running for a long time unattended.

• Do not use the device without adapted bubble liquid. Never fill with hot liquids. Always make sure there is enough

liquid in the tank.

• There may be some smoke or a particular smell when the device is activated for the first time. This is normal and

any smoke or smell will gradually disappear.

• Note that damage caused by user modifications to the device is not covered by the warranty.

• Keep the device away from children and unauthorised users.

3. General Guidelines

• This device is designed for professional use on stage, in discos, theatres, etc. The VDL25BM should only be

used indoors with the included power adapter connected to an alternating current of max. 230VAC / 50Hz.

• Do not shake the device. Avoid brute force when installing or operating the device.

• Select a well-ventilated location where the device is protected against extreme heat (see “Technical

Specifications”), dust and moisture. Respect a minimum distance of 0.3m between the device’s light output and

any illuminated surface.

• Use an appropriate safety cable to fix the device (e.g. VDLSC7 VDLSC8 or ).

Be very careful during the installation: touching live wires can cause life-threatening electroshocks.

Do not touch the device during operation as the housing heats up.

Keep this device away from rain and moisture.

Unplug the mains lead before opening the housing.

VDL25BM 2 VELLEMAN

• Familiarise yourself with the functions of the device before actually using it. Do not allow operation by unqualified

people. Any damage that may occur will most probably be due to unprofessional use of the device.

• Use the original packaging if the device is to be transported.

• All modifications of the device are forbidden for safety reasons.

• Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks,

crash, etc. Using the device in an unauthorised way will void the warranty.

• The installation has to be approved by an expert before the device is taken into service.

4. Installation

a) Adding Bubble Liquid

• Only fill the tank when the device is unplugged from the mains.

• Use only bubble liquid without oil or grease. Any non recommended bubble liquid may damage the bubble

machine.

• Fill the tank only with specially designed water-based bubble liquid, order code VDLBL5.

1) Unscrew the screw caps on the left side of the tank holding the lid.

2) Pivot the lid downwards and remove the plastic tank.

3) Carefully pour bubble liquid into the tank.

4) Replace the tank and close the lid. Fasten.

Remark: Do not operate the device when the lid is off.

b) Replacing the fuse

• Only replace a fuse with a fuse of the same type and rating.

• Only replace a fuse when the device is unplugged from the mains.

• The fuse is an internal fuse. It should be replaced by your agent or an authorized dealer.

1) Unscrew the fuse holder on the back with an appropriate screwdriver.

2) Remove the old fuse and replace it with a new one.

3) Replace the fuse holder in the housing and fasten it with the screwdriver.

c) Mounting the device

• The installation must always be secured with a secondary attachment e.g. a safety cable.

• Never stand directly below the device when it is being mounted, removed or serviced. Have a qualified technician

check the device once a year and once before you bring it into service.

• Install the device in a location with few passers-by that is inaccessible to unauthorised persons

• Overhead mounting requires extensive experience: calculating workload limits, determining the installation

material to be used. Have the material and the device itself checked regularly. Do not attempt to install the device

yourself if you lack these qualifications as improper installation may result in injuries.

• Before mounting make sure the installation area can hold a minimum point load of 10 times the device's weight.

• Make sure there is no flammable material within a 0.5m radius of the device.

• Have a qualified electrician carry out the electric connection.

• The installation has to be approved by an expert before the device is taken into service.

• Connect the device to the mains with the power plug. Don’t connect it to a dimming pack.

5. Use

• Connect the power plug to the mains to start the bubble machine.

• Pulling the plug will stop the machine.

VDL25BM 3 VELLEMAN

6. Cleaning and Maintenance

1. All screws should be tightened and free of corrosion.

2. The housing, visible parts, mounting supports and the installation location (e.g. ceiling, suspension, trussing)

should not be deformed, modified or tampered with e.g. do not drill extra holes in mounting supports, do not

change the location of the connections.

3. Moving mechanic parts must not show any signs of wear and tear.

4. The electric power supply cables must not show any damage. Have a qualified technician maintain the device.

5. Disconnect the device from the mains prior to maintenance activities.

6. Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.

7. There are no user-serviceable parts except for the fuse.

8. Contact your dealer for spare parts if necessary.

7. Technical Specifications

Power Supply max. 230VAC / 50Hz

Power Consumption max. 40W

Fuse F1A, 250VAC (5 x 20mm) (order code FF1N)

Tank Capacity 1.0l

Dimensions 280 x 240 x 240mm

Total Weight 3.2kg

Max. Ambient Temperature 45°C

The information in this manual is subject to change without prior notice.

VDL25BM – ZEEPBELLENMACHINE

1. Inleiding en kenmerken

Aan alle ingezetenen van de Europese Unie

Belangrijke milieu-informatie betreffende dit product

Dit symbool op het toestel of de verpakking geeft aan dat, als het na zijn levenscyclus wordt weggeworpen,

dit toestel schade kan toebrengen aan het milieu.

Gooi dit toestel (en eventuele batterijen) niet bij het gewone huishoudelijke afval; het moet bij een

gespecialiseerd bedrijf terechtkomen voor recyclage.

U moet dit toestel naar uw verdeler of naar een lokaal recyclagepunt brengen.

Respecteer de plaatselijke milieuwetgeving.

Hebt u vragen, contacteer dan de plaatselijke autoriteiten inzake verwijdering.

Dank u voor uw aankoop! Lees deze handleiding grondig voor u het toestel in gebruik neemt. Werd het toestel

beschadigd tijdens het transport, installeer het dan niet en raadpleeg uw dealer.

2. Veiligheidsinstructies

Wees voorzichtig bij de installatie: raak geen kabels aan die onder stroom staan om dodelijke elektroshocks

te vermijden.

Raak het toestel niet aan wanneer het in gebruik is: de behuizing wordt warm.

Bescherm dit toestel tegen regen en vochtigheid.

Verzeker u ervan dat het toestel niet aangesloten is op een stroombron alvorens het te openen.

Product specificaties

Merk:	HQ Power
Categorie:	Effect machine
Model:	VDL25BM
Kleur van het product:	Zilver
Gewicht:	3200 g
Ingangsspanning:	230 V
Frequentie:	50 Hz
Productafmetingen (B x H x D):	280 x 240 x 240 mm
Stroomverbruik (typisch):	25 W
Vloeistoftank capaciteit:	1 l