HQ Power PAR64 Handleiding

HQ Power Effect machine PAR64

Lees hieronder de 📖 handleiding in het Nederlandse voor HQ Power PAR64 (22 pagina's) in de categorie Effect machine. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/22

VDPLP64SB / VDPLP64SC

PAR64 LED PROJECTOR – SHORT

PAR64 LED SPOT - KORT TYPE

PROJECTEUR LED PAR64 - MODÈLE COURT

FOCO PAR64 CORTO CON LEDs

KURZER LED PAR64-SCHEINWERFER

VDPLP64SB:

BLACK

ZWART

NOIR

NEGRO

SCHWARZ

VDPLP64SC:

CHROME

VERCHROOMD

CHROMÉ

CROMADO

VERCHROMT

USER MANUAL 2

GEBRUIKERSHANDLEIDING 5

NOTICE D’EMPLOI 9

MANUAL DEL USUARIO 13

BEDIENUNGSANLEITUNG 17

VDPLP64SB / VDPLP64SC

27.09.2011 ©Velleman nv

User manual

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its

lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted

municipal waste; it should be taken to a specialized company for recycling. This device

should be returned to your distributor or to a local recycling service. Respect the local

environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing HQ-power! This LED parcan light with high-quality 10mm LEDs gives your

stage or club a unique appearance. It offers you excellent colour mixing through pre-programmed

effects or DMX control. Please read the manual thoroughly before bringing this device into service. If

the device was damaged in transit, do not install or use it and contact your dealer.

2. Safety Instructions

Be very careful during the installation: touching live wires can cause life-

threatening electroshocks.

Always disconnect mains power when device not in use or when servicing or

maintenance activities are performed. Handle the power cord by the plug only.

Keep this device away from children and unauthorized users.

Caution: device heats up during use.

Do not stare directly at the light source, as this may cause

- epileptic seizure in sensitive people

- temporarily loss of sight (flash blindness)

- permanent (irreversible) eye damage

There are no user-serviceable parts inside the device. Refer to an authorized

dealer for service and/or spare parts.

• This device falls under protection class I. It is therefore essential that the device be earthed. Have

a qualified person carry out the electric connection.

• Make sure that the available voltage does not exceed the voltage stated in the specifications of

this manual.

• Do not crimp the power cord and protect it against damage. Have an authorised dealer replace it

if necessary.

• Respect a minimum distance of 0.5m between the device’s light output and any illuminated

surface.

• Use an appropriate safety cable to fix the device (e.g. VDLSC7 or VDLSC8).

3. General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.

Indoor use only. Keep this device away form rain, moisture, splashing and

dripping liquids.

Keep this device away from dust and extreme heat. Make sure the ventilation

openings are clear at all times. For sufficient air circulation, leave at least 1” (±2.5

cm) in front of the openings.

Protect this device from shocks and abuse. Avoid brute force when operating the

device.

• Familiarise yourself with the functions of the device before actually using it. Do not allow

operation by unqualified people. Any damage that may occur will most probably be due to

unprofessional use of the device.

• All modifications of the device are forbidden for safety reasons. Damage caused by user

modifications to the device is not covered by the warranty.

VDPLP64SB / VDPLP64SC

27.09.2011 ©Velleman nv

• Only use the device for its intended purpose. All other uses may lead to short circuits, burns,

electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void the

warranty.

• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty

and the dealer will not accept responsibility for any ensuing defects or problems.

• Mechanical wear is not covered by the warranty.

• A qualified technician should install and service this device.

• Do not switch the device on immediately after it has been exposed to changes in temperature.

Protect the device against damage by leaving it switched off until it has reached room

temperature.

• This device is designed for discos, theatres, etc. The professional use on stage, in

VDPLP64SB/VDPLP64SC can be used indoors with an alternating current of max.

230VAC/50Hz.

• Lighting effects are not designed for permanent operation: regular operation breaks will prolong

their lives.

• Use the original packaging if the device is to be transported.

• Keep this manual for future reference.

4. Features

• RGB colour mixing

• output distance : 20-25m

• master / slave or sound activated

• DMX-controlled : 4 channels with dimmer / strobe function

• with built-in microphone for sound activation

5. Installation

a) Fixture

• Choose a suitable mounting location and mount the light in the desired angle.

• Use a waterproof cover when using the light outdoors.

• Insert the power cord into an appropriate outlet (230VAC / 50Hz).

• Switch off the power to the light when not in use.

• This LED parcan is controlled through a 3-pin XLR (1

= GROUND, 2 = DATA-, 3 = DATA+).

b) Fuse

• Only fit or replace a fuse when the device is

unplugged from the mains.

• Replace a blown fuse with a fuse of the same type

and rating (see “Technical Specifications”):

1. Remove the fuse holder (1) at the back using an

appropriate screwdriver.

2. Remove the old fuse and install a new one.

3. Replace the fuse holder and fasten tight with the

screwdriver.

c) Mounting the Device

• Have the device installed by a qualified person, respecting EN 60598-2-17 and all other

applicable norms.

• The carrying construction must be able to support 10 times the weight of the device for 1

hour without deforming.

• The installation must always be secured with a secondary attachment e.g. a safety cable.

• Never stand directly below the device when it is being mounted, removed or serviced. Have a

qualified technician check the device once a year and once before you bring it into service.

• Install the device in a location with few passers-by that is inaccessible to unauthorized

persons.

• Overhead mounting requires extensive experience: calculating workload limits, determining

the installation material to be used… Have the material and the device itself checked

regularly. Do not attempt to install the device yourself if you lack these qualifications as

improper installation may result in injuries.

• Adjust the desired inclination angle via the mounting bracket and tighten the bracket screws.

• Make sure there is no flammable material within a 0.5m radius of the device.

• Have a qualified electrician carry out the electric connection.

• Connect the device to the mains with the power plug. Do not connect it to a dimming pack.

• The installation has to be approved by an expert before the device is taken into service.

Product specificaties

Merk:	HQ Power
Categorie:	Effect machine
Model:	PAR64
Kleur van het product:	Zwart
Gewicht:	1500 g
Aantal lampen:	177 lampen
Ingangsspanning:	90 - 250 V
Frequentie:	50 - 60 Hz