HP StorageWorks D2D2502i Handleiding

HP Disk array StorageWorks D2D2502i

Lees hieronder de 📖 handleiding in het Nederlandse voor HP StorageWorks D2D2502i (27 pagina's) in de categorie Disk array. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/27

Does data growth leave you struggling with complex, distributed, and costly data protection? Keep pace with HP disk-based data

protection.

HP StoreOnce Backup systems with HP StoreOnce deduplication deliver daily onsite backup of small or mid-size data centers, network

efficient remote office protection, rapid data restore and reliable offsite disaster recovery. Offering leading price-performance, you can

start small and upgrade capacity and performance to meet ever shrinking backup windows, while automating data protection to simplify

management, reduce IT intervention, and improve reliability.

All HP StoreOnce Backup systems feature HP StoreOnce deduplication software for efficient, longer term data retention on disk and

enabling network efficient replication for a cost-effective way of transmitting data off-site for disaster recovery purposes. The

StoreOnce Backup systems integrate seamlessly into your current IT environment and offer you the flexibility of both virtual tape

library and NAS targets.

NOTE:

Actual performance is dependent upon data set type, compression levels, number of data streams, number of devices emulated

and number of concurrent tasks, such as housekeeping or replication.

* For legacy D2D backup systems (EJ001A, EJ002A, EH938A, EH939A, EH941A, EH942A, EH999A), the addition of NAS as a target for

backup is limited to the CIFS protocol, suitable for use in Windows-only environments. Earliest legacy systems used authentication

models for the CIFS protocol of "no authentication" or "local user level authentication". There was no support for Microsoft Active

Directory authentication. However support for Microsoft Active Directory authentication is available on legacy systems via a free

firmware upgrade by following the "Support & Drivers" link on

www.hp.com/go/d2d

or by following the "HP Support & Drivers" link

from:

www.hp.com

EJ001C, EJ002C, EH993C EH996B, EH998B, EH985A and EH983B support CIFS, with Microsoft Active Directory

authentication and NFS protocols.

HP D2D2500 Backup system HP D2D4106 Backup system

HP D2D 4106 and D2D4112 Backup system

with D2D4106 or D2D4112/4312 Upgrade Kit

HP D2D4312 and D2D4324 Backup system

QuickSpecs

HP StoreOnce Backup systems

Overview

DA - 13218 Worldwide — Version 18 — September 28, 2012

Page 1

What's New

HP StoreOnce Replication Manager 2.0 allows users to monitor, report and manage multiple StoreOnce backup systems' GUI's

through a single management console.

Replication Manager 2.0 provides an easier way to monitor backup targets showing trends analysis, enhanced topology view and

email alert notification for up to 400 StoreOnce backup systems, being replicated to a central site.

HP D2D4324 Backup system for enterprise data centers delivers a scalable 4U solution from 18 to 72 TB of usable capacity. The

highest capacity and performance* point in the HP StoreOnce Backup system family, it automates the daily backup of multiple

servers through the flexibility of virtual tape library and NAS (CIFS & NFS) interfaces.

HP StoreOnce Open Storage Technology (OST) plug-in integrates deduplicated replication data with Symantec backup

applications

* Actual performance is dependent upon data set type, compression levels, number of data streams, number of devices emulated and

number of concurrent tasks, such as housekeeping or replication.

** Replication Manager 2.0 software is available with the following replication licenses (EH991A, EH994A, EH984A, EH999A and

EH985A).

In order to benefit from Replication Manger, StoreOnce backup systems require the latest firmware, which can be obtained via a free

firmware upgrade by following the "Support & Drivers" link on

www.hp.com/go/d2d

or by following the "HP Support & Drivers" link

from:

www.hp.com

QuickSpecs

HP StoreOnce Backup systems

Overview

DA - 13218 Worldwide — Version 18 — September 28, 2012

Page 2

Make backup easier

HP StoreOnce Backup systems work with your backup application to help automate and improve the

backup process while reducing the time spent managing data protection. Implementing unattended daily

backup to disk is especially valuable for environments with limited IT resources.

Keep pace with data

growth

Most HP StoreOnce Backup systems (apart from the entry level D2D2500 series), allow you to grow usable

capacity as your backup data requirements grow. The D2D4324 allows you to scale up from 18 to 72 TB of

usable capacity, the D2D4312 allows you to scale up from 9 to 36TB of usable capacity, The D2D4112

from 9 to 18 TB of usable capacity and the D2D4106 from 4.5 to 9 TB of usable capacity as your data

storage requirements grow, by using a simple and cost effective capacity upgrade for a lower cost

alternative to purchasing additional systems.

Improve backup

efficiency with data

deduplication

Why continue to store the same data over and over again with each backup? HP StoreOnce deduplication

reduces the disk space required to store backup data sets by typically 20x by eliminating duplicate data

without impacting backup performance. This means that you can retain more backup data on disk for

longer, and enables greater data accessibility for rapid restore of lost or corrupt files.

Meet shrinking backup

windows

StoreOnce Backup systems can simultaneously back up multiple servers on a standard 1 or 10Gb Ethernet

or 4 and 8 Gb Fibre Channel network to a single disk-based solution. With up to 50 backup streams

configured to a single StoreOnce backup system you can achieve backup performance of up to 4TB/hour to

reduce your backup window.

Improve data protection

at remote offices

The HP StoreOnce Backup systems with HP StoreOnce deduplication reduces the network bandwidth

needed to transmit data offsite. This enables cost-effective, network efficient data replication to

automate and centralize backup from remote sites or branch offices Replication manager*, included with

the replication license, provides an easier way to centrally manage a large number of devices being

replicated to a central site.

StoreOnce Backup systems offer an intuitive web-based browser interface allowing you to monitor your

StoreOnce Backup system, locally or remotely, to view results or change settings. This self-managing

device also reduces your routine maintenance.

* Replication Manager software is available with the following replication licenses (EH990A , EH991A,

EH994A, EH984A, EH999A and EH985A). In order to benefit from Replication manger, StoreOnce backup

systems require the latest firmware, which can be obtained via a free firmware upgrade by following the

"Support & Drivers" link on

www.hp.com/go/d2d

or by following the "HP Support & Drivers" link from:

www.hp.com

Deliver reliable disaster

recovery

With HP StoreOnce enabled replication, lower cost transmission inks make network-based disaster

recovery a practical alternative. You can use HP StoreOnce backup systemsto deliver a consolidated

disaster recovery solution for the data center.

Enable rapid file restores

Deduplication means that up to 20x more backup data can be kept on-hand for rapid disk-based file access

and restore to minimize disruption and loss of productivity.

Simplify backup in

complex environments

The StoreOnce Backup systems offer virtual tape library and NAS targets for backup applications allowing

for ease of use and integration in to existing IT environments and provide a way to consolidate data from

QuickSpecs

HP StoreOnce Backup systems

Features and Benefits

DA - 13218 Worldwide — Version 18 — September 28, 2012

Page 3

Product specificaties

Merk:	HP
Categorie:	Disk array
Model:	StorageWorks D2D2502i
Gewicht:	20000 g
Netwerkfuncties:	Gigabit Ethernet
Type behuizing:	Rack (1U)
Capaciteit opslag-drive:	500 GB
Totale geïnstalleerde opslagcapaciteit:	2 TB
Aantal storage drives geïnstalleerd:	4
HDD rotatiesnelheid:	7200 RPM
Afmetingen (B x D x H):	448 x 682 x 43 mm
Opslag schijf-interface:	SATA II
Soorten RAID:	5, 6
Overdrachtssnelheid:	0.72 Gbit/s