HP ProLiant ML110 G7 Handleiding

HP Server ProLiant ML110 G7

Lees hieronder de 📖 handleiding in het Nederlandse voor HP ProLiant ML110 G7 (115 pagina's) in de categorie Server. Deze handleiding was nuttig voor 51 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/115

HP ProLiant ML110 G7 Server

User Guide

Abstract

This document is for the person who installs, administers, and troubleshoots servers and storage systems. This document is in

tended for experienced

IT professionals or end users with no or prior hardware -

setup experience. HP assumes you are qualified in the servicing of computer equipment and

trained in recognizing hazards in products with hazardous energy levels.

Part Number: 638029- 002

June 2011

Edition: 2

The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express

warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall

not be liable for technical or editorial errors or omissions contained herein.

Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. Bluetooth is a trademark owned by its proprietor and used by

Hewlett- Packard Company under license.

Contents 3

Contents

Component identification ............................................................................................................... 7

Front panel components ............................................................................................................................. 7

Front panel LEDs and buttons ...................................................................................................................... 7

Rear panel components .............................................................................................................................. 8

R ear panel LEDs and buttons....................................................................................................................... 9

System board components ........................................................................................................................ 10

System maintenance switch ............................................................................................................. 11

System board LEDs ........................................................................................................................ 11

NMI functionality ........................................................................................................................... 12

DIMM slot locations ....................................................................................................................... 12

SAS and SATA device numbering ............................................................................................................. 13

SAS and SATA hard drive LEDs ................................................................................................................. 14

SAS and SATA hard drive LED combinations .............................................................................................. 14

BBWC module LEDs ................................................................................................................................ 15

FBWC module LEDs ................................................................................................................................. 17

Fan locations .......................................................................................................................................... 18

Operations ................................................................................................................................. 19

Power up the server ................................................................................................................................. 19

Power down the server ............................................................................................................................. 19

Removing the front bezel .......................................................................................................................... 19

Installing the front bezel ........................................................................................................................... 20

Removing the access panel ....................................................................................................................... 20

Installing the access panel ........................................................................................................................ 21

Removing the air baffle ............................................................................................................................ 21

Installing the air baffle ............................................................................................................................. 22

Removing the full- length expansion board retainer ....................................................................................... 23

Installing the full length expansion board retainer- ........................................................................................ 23

Setup ......................................................................................................................................... 25

Optional installation services .................................................................................................................... 25

Optimum environment .............................................................................................................................. 25

Space and airflow requirements ...................................................................................................... 25

Temperature requirements ............................................................................................................... 26

P ower requirements ....................................................................................................................... 26

Electrical grounding requirements .................................................................................................... 26

Identifying the contents of the server shipping carton .................................................................................... 27

Installing hardware options ....................................................................................................................... 27

Setti ng up a tower server.......................................................................................................................... 27

Installing a server in a rack ....................................................................................................................... 27

Powering up and configuring the server ..................................................................................................... 29

Installing the operating system................................................................................................................... 30

R egistering the server............................................................................................................................... 30

Hardware options installation ....................................................................................................... 31

Introduction ............................................................................................................................................ 31

Memory options ...................................................................................................................................... 31