HP ProLiant BL490c G6 Handleiding

HP Server ProLiant BL490c G6

Lees hieronder de 📖 handleiding in het Nederlandse voor HP ProLiant BL490c G6 (100 pagina's) in de categorie Server. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/100

HP ProLiant BL490c G6 Server Blade

User Guide

Abstract

This document is for the person who installs, administers, and troubleshoots servers and storage systems. HP assumes you are qualified in the

servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels.

Part Number: 507071- 002

March 2011

Edition: 2

The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express

warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall

not be liable for technical or editorial errors or omissions contained herein.

Microsoft, Windows, and Windows Server are U.S. registered trademarks of Microsoft Corporation.

Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

Contents 3

Contents

Component identification ............................................................................................................... 6

Front panel components ............................................................................................................................. 6

Front panel LEDs ....................................................................................................................................... 6

System board components .......................................................................................................................... 7

M ezzanine connector definitions ....................................................................................................... 8

System maintenance switch ............................................................................................................... 8

System maintenance switch procedures .............................................................................................. 8

HP c- Class Blade SUV Cable..................................................................................................................... 10

Operations ................................................................................................................................. 11

Power up the server blade ........................................................................................................................ 11

Power down the server blade .................................................................................................................... 11

Remove the server blade .......................................................................................................................... 12

Remove the access panel.......................................................................................................................... 13

I nstall the access panel............................................................................................................................. 13

Setup ......................................................................................................................................... 14

Overview ............................................................................................................................................... 14

Installing an HP BladeSystem c- Class enclosure ........................................................................................... 14

Installing server blade options ................................................................................................................... 14

Installing interconnect modules .................................................................................................................. 14

Interconnect bay numbering and device mapping .............................................................................. 15

Connecting to the network ........................................................................................................................ 17

Installing a server blade ........................................................................................................................... 17

Completing the configuration .................................................................................................................... 19

Hardware options installation ....................................................................................................... 20

Introduction ............................................................................................................................................ 20

Hard drive option .................................................................................................................................... 20

Memory options ...................................................................................................................................... 21

Memory subsystem architecture ....................................................................................................... 22

Single- - - , dual , and quad rank DIMMs ............................................................................................... 22

DIMM identification ....................................................................................................................... 22

Memory configurations ................................................................................................................... 23

G eneral DIMM slot population guidelines......................................................................................... 25

Installing DIMMs ........................................................................................................................... 27

Processor option ...................................................................................................................................... 29

Mezzanine card option ............................................................................................................................ 34

HP Trusted Platform Module option ............................................................................................................ 36

Installing the Trusted Platform Module board ..................................................................................... 36

Retaining the recovery key/password .............................................................................................. 37

Enabling the Trusted Platform Module ............................................................................................... 38

Cabling ..................................................................................................................................... 39

Hard drive cabling .................................................................................................................................. 39