Hotpoint NSWM 843C GG UK Handleiding

Bekijk gratis de handleiding van Hotpoint NSWM 843C GG UK (4 pagina’s), behorend tot de categorie Wasmachine. Deze gids werd als nuttig beoordeeld door 23 mensen en kreeg gemiddeld 4.4 sterren uit 8 reviews. Heb je een vraag over Hotpoint NSWM 843C GG UK of wil je andere gebruikers van dit product iets vragen? Stel een vraag

GB

Quick Guide

THANK YOU FOR PURCHASING A HOTPOINT PRODUCT.

To receive more comprehensive assistance, register the

appliance on

www.hotpoint.eu/register

Before using the appliance carefully read the Health and Safety guide.

Before using the machine, it is imperative that the transport bolts are removed. For more

detailed instructions on how to remove them, see the Installation Guide.

CONTROL PANEL

WASH CYCLE TABLE

For all testing institutes:

2) Long cotton cycle: set programme 3 at temperature 40°C.

3) Long synthetics cycle: set cycle 4 at a temperature of 40°C.

* By selecting the cycle and excluding the spin cycle, the washing machine will drain only. 15

** The duration of the wash cycles can be checked on the display.

*** If “Steam Hygiene” option is set, the duration of the wash cycles will increase.

The cycle duration indicated on the display or instruction manual is an estimate based on

standard conditions. The actual duration may vary in relation to several factors, such as

the temperature and pressure of the incoming water, ambient temperature, amount of

detergent, load quantity and type, load balancing and any additional options selected.

1) Test wash cycle in compliance with regulation1061/2010:

This cycle is designed for normally soiled cotton loads and is the most ecient in terms of

both electricity and water consumption; it should be used for garments washable at 60°C or

at 40°C. The actual washing temperature may dier from the indicated value.

PRODUCT DESCRIPTION

1.

3.

2.

5.

4.

7.

6.

8.

1. Top

2. Detergent dispenser drawer

3. Control panel

4. Handle

5. Porthole door

6. Drain pump (behind the plinth)

7. Plinth (removable)

8. Adjustable feet (2)

1. ON/OFF button

2. CHILD LOCKbutton

3. EXTRA TOUCH button

4. EXTRA TOUCH indicator lights

5. START/PAUSE button and indicator light

6. OPTION button and indicator light

7. DELAY START button

8. SPIN button

9.TEMPERATURE button

10.WASH CYCLE SELECTOR KNOB

Maximum load 8 kg

Power input in o mode 0.5 W / in left-on mode 8 W

Detergents and

Additives

Recommended

detergent

Residual

dampness %

Energy con-

sumption kWh

Total water l

Wash cycleTemperature Max.

spin speed

(rpm)

Max.

load

(kg)

Duration

(minutes)

Wash Fabric

softener Powder Liquid

Default Range1 2

1 Mixed 40°C - 40°C14008** – – ––

2Eco Cotton (1) 60°C 60°C14008 225   53 1,0455

40°C14008 220   53 1,0392

3Cotton (2)40°C - 60°C14008220   53 1,0392

4Synthetics (3)40°C - 60°C12004,5175   53 0,5455

5Delicates 40°C - 40°C10004,5** – – ––

6Wool 40°C - 40°C8002** – – ––

7White 40°C - 90°C14008**   –– ––

8Duvet 30°C - 30°C10003,5** – – ––

9Rapid 30 min30°C - 30°C8004,5** – – ––

10Full Load 45 min40°C - 40°C12008** – – ––

11 Shirts40°C - 40°C6002** – – ––

12 Baby40°C - 40°C8004** – – ––

13Anti Stain 40°40°C - 40°C14008** – – ––

14Anti Allergy60°C - 60°C14005**   – ––

15 Spin & Drain *––14008**––––– ––

16 Rinse & Spin ––14008**–  ––– ––

 Required dosage Optional dosage

DETERGENT DISPENSER DRAWER

Compartment *:

Do not insert detergent in this compartment.

Compartment 1: Washing detergent (powder

or liquid)

If liquid detergent is used, the removable plastic

partition (supplied) should be used for proper A

dosage.

If powder detergent is used, place the partition

into slot .B

Compartment 2: Additives (fabric softeners, etc.)

The fabric softener must not exceed the “MAX” level.

! Use powder detergent for white cotton garments, for pre-washing, and

for washing at temperatures over 60°C.

! Follow the instructions given on the detergent packaging.

1

2

A

B

*

1

10

2

DISPLAY

4

567

89

3

Product specificaties