Hotpoint NM11 823 WK EU Handleiding

Bekijk gratis de handleiding van Hotpoint NM11 823 WK EU (14 pagina’s), behorend tot de categorie Wasmachine. Deze gids werd als nuttig beoordeeld door 16 mensen en kreeg gemiddeld 4.5 sterren uit 5 reviews. Heb je een vraag over Hotpoint NM11 823 WK EU of wil je andere gebruikers van dit product iets vragen? Stel een vraag

GB

Quick Guide

THANK YOU FOR PURCHASING A HOTPOINT PRODUCT.

To receive more comprehensive assistance, register the

appliance on

www.hotpoint.eu/register

Before using the appliance carefully read the Health and Safety guide.

Before using the machine, it is imperative that the transport bolts are removed. For more

detailed instructions on how to remove them, see the Installation Guide.

CONTROL PANEL

WASH CYCLE TABLE

For all testing institutes:

2) Long cotton cycle: set wash cycle 3 with a temperature of 40°C.

3) Long synthetics cycle: set wash cycle 4 with a temperature of 40°C.

* By selecting thecycle and excluding the spin cycle, the washing machine will drain only. 14

** The duration of the wash cycles can be checked on the display.

***For Prewash press the “60°

40° ” button until the symbol lights up (only 90°).

The cycle duration indicated on the display or instruction manual is an estimate based on

standard conditions. The actual duration may vary in relation to several factors, such as

the temperature and pressure of the incoming water, ambient temperature, amount of

detergent, load quantity and type, load balancing and any additional options selected.

1) Test wash cycle in compliance with regulation1061/2010:

This cycle is designed for normally soiled cotton loads and is the most ecient in terms of

both electricity and water consumption; it should be used for garments washable at 60°C or

at 40°C. The actual washing temperature may dier from the indicated value.

PRODUCT DESCRIPTION

1.

3.

2.

5.

4.

7.

6.

8.

1. Top

2. Detergent dispenser drawer

3. Control panel

4. Handle

5. Porthole door

6. Drain pump (behind the plinth)

7. Plinth (removable)

8. Adjustable feet (2)

1. EXTRA RINSE / MUTE button

2. FINAL CARE / KEY LOCK button

3. ON/OFF button

4. STEAM HYGIENE button and indicator light

5. START/PAUSE button

6. RAPID button

7. SPIN button

8. START DELAY button

9.TEMPERATURE button

10.WASH CYCLE SELECTOR KNOB

Maximum load 8 kg

Power input in o mode 0.5 W / in left-on mode 8 WAdd

Gar-

ments

( )

Detergents and

Additives

Recommended

detergent

Residual damp-

ness %

Energy consump-

tion kWh

Total water l

Wash cycleTemperature Max.

spin speed

(rpm)

Max.

load

(kg)

Duration

(min-

utes)

Pre-

wash Wash Fabric

softener Powder Liquid

Default Range1 23

1Mixed 40°C - 40°C1200 8** – –– ––

2Eco Cotton (1)60°C 60°C12008 225– 53 1,0455

40°C12008 235– 53 1,2494

3Cotton (2)40°C - 60°C12008 235– 53 1,2494

4Synthetics (3)40°C - 60°C12004,5 175– 53 0,5455

5Delicates 40°C - 40°C1000 4,5** – –– ––

6Wool 40°C - 40°C8002 ** – –– ––

7Anti Allergy60°C - 60°C1200 5** – – ––

8Anti Stain 40°40°C - 40°C1000 4,5** – –– ––

9White 40°C - 90°C1200 8**  (***) – – –

10Steam Refresh––– 2**––––––– – –

11Rapid 30 min30°C - 30°C8004,5 ** – –– – –

12Bed & Bath60°C - 60°C1200 8** – – ––

13 Shirts40°C - 40°C6002 ** – –– ––

14Spin & Drain *–– 1200 8**––––––– – –

15Rinse & Spin –– 1200 8**–– –––– ––

  Required dosage Optional dosage

DETERGENT DISPENSER DRAWER

compartment 1: Pre-wash detergent

(powder)

compartment 2: Detergent for the wash

cycle (powder or liquid)

If liquid detergent is used, it is recommended

that the removable plastic partition A

(supplied) be used for proper dosage.

If powder detergent is used, place the partition

into slot B.

compartment 3: Additives (fabric softeners,

etc.)

The fabric softener should not overow the grid.

! Use powder detergent for white cotton garments, for pre-washing, and

for washing at temperatures over 60°C.

! Follow the instructions given on the detergent packaging.

1

2

3

A

B

1 2

4

56789

3

10

DISPLAY

Product specificaties