Hotpoint NLLCD 946 GS A EU Handleiding

Hotpoint Wasmachine NLLCD 946 GS A EU

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Hotpoint NLLCD 946 GS A EU (5 pagina's) in de categorie Wasmachine. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
GB
Quick Guide
THANK YOU FOR PURCHASING A HOTPOINT PRODUCT.
To receive more comprehensive assistance, register the
appliance on
www.hotpoint.eu/register
Before using the appliance carefully read the Health and Safety guide.
Before using the machine, it is imperative that the transport bolts are removed. For more
detailed instructions on how to remove them, see the Installation Guide.
CONTROL PANEL
WASH CYCLE TABLE
For all testing institutes:
2) Long cotton cycle: set wash cycle with a temperature of 40Β°C. 3
3) Long synthetics cycle: set wash cycle with a temperature of 40Β°C.4
* By selecting the cycle and excluding the spin cycle, the washing machine will drain only. 14
** The duration of the wash cycles can be checked on the display.
The cycle duration indicated on the display or instruction manual is an estimate based on
standard conditions. The actual duration may vary in relation to several factors, such as
the temperature and pressure of the incoming water, ambient temperature, amount of
detergent, load quantity and type, load balancing and any additional options selected.
1) Test wash cycle in compliance with regulation 1061/2010:
This cycle is designed for normally soiled cotton loads and is the most eξ€Ÿcient in terms of
both electricity and water consumption; it should be used for garments washable at 60Β°C or
at 40Β°C. The actual washing temperature may diξ€žer from the indicated value.
1. RAPID / ECO button
2. UP / DOWN buttons
3. ON/OFF button
4. ACTIVE CARE button and indicator light
5. START/PAUSE button
6. CONFIRM / KEY LOCK button
7. START DELAY button
8. SPIN button
9. TEMPERATURE button
10. OPTIONS / SETTINGS button
11. STEAM HYGIENE/FAVOURITES button
12. WASH CYCLE SELECTOR KNOB
13. Programme Key
Maximum load 9 kg
Power input in oξ€ž mode 0.5 W / in left-on mode 8 W
Active
Care
Add
Gar-
ments
( )
Detergents and
Additives
Recommended
detergent
Residual damp-
ness %
Energy consump-
tion kWh
Total water l
Wash cycle Temperature Max.
spin speed
(rpm)
Max.
load
(kg)
Duration
(min-
utes)
Pre-
wash Wash Fabric
softener Powder Liquid
Default Range 1 2 3
1 Mixed 40Β°C - 40Β°C 1400 9 ** ο„‘ ο„‘ ο„‘ ο„‘ ο„Œ β€“ο€Œ –––
2 Eco Cotton (1) 60Β°C 60Β°C 1400 9 225 –– ο„‘ ο„Œ ο€Œ ο€Œ 53 0,87 57,5
40Β°C 1400 9 235 –– ο„‘ ο„Œ ο€Œ ο€Œ 53 1,24 94
3 Cotton (2) 40Β°C - 60Β°C 1400 9 235 –– ο„‘ ο„Œ ο€Œ ο€Œ 53 1,24 94
4 Synthetics (3) 40Β°C - 60Β°C 1200 4,5 175 – ο„‘ ο„‘ ο„‘ ο„Œ ο€Œ ο€Œ 53 0,54 55
5 Delicates 40Β°C - 40Β°C 1000 4,5 ** ο„‘ ο„‘ – ο„‘ ο„Œ β€“ο€Œ –––
6 Wool 40Β°C - 40Β°C 800 2 ** – – ο„‘ ο„Œ β€“ο€Œ –––
7 Anti Allergy 60Β°C - 60Β°C 1400 5 ** – – ο„‘ ο„Œ ο€Œ ο€Œ –––
8 Anti Stain 40Β° 40Β°C - 40Β°C 1000 4,5 ** ο„‘ ο„‘ – ο„‘ ο„Œ β€“ο€Œ –––
9 White 40Β°C - 90Β°C 1400 9 ** ο„‘ ο„‘ ο„‘ ο„‘ ο„Œ ο€Œ ο€Œ –––
10 Steam Refresh – – – 2 ** – – – – – – – – – –
11 Rapid 30 min 30Β°C - 30Β°C 800 4,5 ** ο„‘ ο„‘ – ο„‘ ο„Œ β€“ο€Œ – – –
12 Specials
β€’ Bed & Bath 60Β°C - 60Β°C 1400 9 ** ο„‘ ο„‘ – ο„‘ ο„Œ ο€Œ ο€Œ – – –
β€’ Shirts 40Β°C - 40Β°C 600 2 ** – – ο„‘ ο„Œ β€“ο€Œ – – –
β€’ Business 30Β°C - 30Β°C 400 2 ** –– ο„‘ ο„Œ β€“ο€Œ – – –
β€’ Baby 40Β°C - 40Β°C 800 4 ** – – ο„‘ ο„Œ β€“ο€Œ – – –
β€’ Duvet 30Β°C - 30Β°C 1000 3,5 ** –– ο„‘ ο„Œ β€“ο€Œ – – –
β€’ Silk & Curtains 30Β°C - 30Β°C – 1 ** – – ο„‘ ο„Œ β€“ο€Œ – – –
β€’ Jeans 40Β°C - 40Β°C 800 4 ** –– ο„‘ ο„Œ β€“ο€Œ – – –
β€’ Rapid 15 min 30Β°C - 30Β°C 800 4,5 ** – – ο„‘ ο„Œ β€“ο€Œ – – –
β€’ Fitness 30Β°C - 30Β°C 600 4 ** –– ο„‘ ο„Œ β€“ο€Œ – – –
β€’ Cuddly toys 30Β°C - 30Β°C – 1 ** –– – – ο€Œ – – –
13 Favourites: allows for any wash cycle to be stored.
14 Spin & Drain * – – 1400 9 ** – – – – – – – – – –
15 Rinse & Spin – – 1400 9 ** – – – – ο„Œ – – – – –
ο„‘ ο„Œ Required dosage Optional dosage
! Turning the knob to position allows for accessing the menu from which to set additional 12
washing programmes.
4
1 2 3
5678911 10
1213
DISPLAY
! The β€œProgramme key” situated inside the detergent dispenser shows all the
available wash cycles together with a graphic guide on how to use the
individual dispenser compartments.
WASH CYCLES
Follow the instructions on the symbols of the garment’s wash
care label. The value indicated in the symbol is the maximum
recommended temperature for washing the garment.
Mixed
For washing lightly to normally soiled resilient garments in cotton, linen,
synthetic bres and mixed bres.
Eco Cotton 60Β°/40Β°
Suitable for washing moderately soiled cotton garments. At 40Β°C and
60Β°C it is the standard cycle for washing cotton garments, and is the most
eξ€Ÿcient in terms of combined water and electricity consumption.
Cotton
Normally to heavily soiled and robust cottons .
Synthetics
Suitable for washing moderately soiled garments made of synthetic bres
(e.g. polyester, polyacrylic, viscose, etc.) or mixed synthetic-cotton bres.
Delicates
For washing very delicate garments. It is advisable to turn the garments
inside out before washing them. For best results, use liquid detergent on
delicate garments.
Wool - Woolmark Apparel Care - Green:
The β€œWool” wash cycle is approved by the Woolmark Company for
washing wool garments classied as β€œhand-washable”, provided that the
wash complies with the instructions appearing on the garment’s label
and with those provided by the manufacturer of this washing machine.
(M )1127
Anti Allergy
Suitable for removing major allergens such as pollen, mites and cat or dog hair.
Anti Stain 40Β°
The programme is suitable to heavily-soiled garments with resistant
colours. It ensures a washing class that is higher than the standard class (A
class). When running the programme, do not mix garments of diξ€žerent
colours. We recommend the use of powder detergent. Pre-treatment with
special additives is recommended if there are obstinate stains.
White
For washing normally to heavily soiled towels, underwear, table and bed
linen, etc in resilient cotton and linen. Only when the temperature is
selected at 90Β°C the cycle is provided with a prewash phase before main
washing phase. In this case it is recommended to add detergent both, in
the prewash and main wash section.
Steam Refresh
The garments will be damp once the cycle is completed, so we recommend
hanging them to dry (2 kg, roughly 3 items). This programme refreshes
garments by removing bad odours and relaxing the bres. Insert dry items
only (that are not dirty) and select programme β€œ ”. Garments Steam Refresh
will be a little damp at the end of the cycle and can be worn after a few
minutes. The β€œSteam Refresh” programme makes ironing easier.
! Do not add softeners or detergents.
! Not recommended for wool or silk garments.
Rapid 30 min
For washing lightly soiled garments quickly. This cycle lasts only 30
minutes, saving time and energy.
Specials
β€’ Bed & Bath
For washing home linen in a single cycle. It optimises the use of fabric
softener and allows for saving time and electricity. We recommend the
use of powder detergent.
β€’ Shirts
Use the special wash cycle to wash shirts in diξ€žerent fabrics and
colours to guarantee they receive the best possible care.
β€’ Business
Program for clothes used infrequently or only slightly dirty (do not use
for dry clean garment).
Follow the instructions of the garment’s wash care label.
β€’ Baby
Use the special wash cycle to remove the remove the soiling typically
caused by babies, while removing all traces of detergent from nappies
in order to prevent the delicate skin of babies from suξ€žering allergic
reactions. The cycle has been designed to reduce the amount of
bacteria by using a greater quantity of water and optimising the eξ€žect
of special disinfecting additives added to the detergent.
β€’ Duvet
Designed for washing eiderdown padded items such as double or
single duvets, cushions and anoraks. It is recommended to load such
padded items in the drum with the edges folded inwards and not to
exceed ΒΎ of the drum’s volume. For optimal washing, we recommend
using a liquid detergent.
β€’ Silk & Curtains
use special wash cycle to wash all silk garments or curtains. We
recommend the use of special detergent which has been designed to
wash delicate clothes.
For washing curtains, fold and place them in a pillow case or mesh bag.
β€’ Jeans
Turn garments inside-out before washing and use a liquid detergent.
β€’ Rapid 15 min
for washing lightly soiled garments in a short time. Not suitable for
wool, silk and garments to be washed by hand.
β€’ Fitness
Sportswear in knitwear or microbers with a normal degree of dirt and
sweat.
β€’ Cuddly toys
With this program it is possible to remove dust more easily and wash
better cuddle toys.
Spin & Drain
Spins the load then empties the water. For resilient garments. If you
exclude the spin cycle, the machine will drain only
Rinse & Spin
Rinses and then spins. For resilient garments.
DISPLAY
The display is useful when programming the washing machine and
provides plenty of information.
COTTON
--:--
1:40
140040Β°
By pressing the and buttons, it is possible to select the desired
option and conrm it with the button.
The rst time the machine is switched on, you will be asked to select the
language and the display will automatically display the language selection
menu.
To select the desired language, press the and buttons; to conrm
the selection, press the button.
Area A will display the following: the icon and selected washing programme,
the washing phases and the time remaining to the end of the wash cycle.
Area B will display: the selected options, the energy and water consumption
for the chosen cycle and the button lock symbol.
1. Top
2. Detergent dispenser drawer
3. Control panel
4. Handle
5. Porthole door
6. Drain pump (behind the plinth)
7. Plinth (removable)
8. Adjustable feet (2)
DETERGENT DISPENSER DRAWER
compartment 1: Pre-wash detergent
(powder)
compartment 2: Detergent for the wash cycle
(powder or liquid)
If liquid detergent is used, it is recommended
that the removable plastic partition A (supplied)
be used for proper dosage.
If powder detergent is used, place the partition
into slot B.
compartment 3: Additives (fabric softeners, etc.)
The fabric softener should not overξ€œow the grid.
! Use powder detergent for white cotton garments, for pre-washing, and
for washing at temperatures over 60Β°C.
! Follow the instructions given on the detergent packaging.
1
2
3
A
B
PRODUCT DESCRIPTION
A
E
C D
B
G
F
1.
3.
2.
5.
4.
7.
6.
8.
Area C will display the default temperature value on the basis of the set
programme; if the programme does not include the setting of the
temperature, the area will display the β€œ ” symbol.-- Β°
Area D will display the default spin cycle speed on the basis of the set
programme; if the programme does not include the setting of the spin
cycle, the area will display the β€œ ” symbol.--
Area E will display the time remaining to the start of the selected
programme if the DELAYED START function was set.
Pressing and holding button for 3 seconds allows for memorising one or F
more preferred wash cycles.
To use the memorised cycles, turn the knob to position .13
Pressing button allows for accessing the menu from which to set G
additional washing options.
Pressing and holding button for 3 seconds allows for accessing the G
settings menu:
- Language: by pressing the and buttons, the user can select the
desired language and conrm it with the button.
- Sound: by pressing the and buttons, the user can activate or
deactivate the sound of the buttons and conrm it with the button.
- Display brightness: by pressing the and buttons, the user can
select the type of display brightness and conrm it with the button.
- Restoring the factory settings: pressing and holding the button for 2
seconds restores the factory settings.
! During a wash cycle if the user does not interact with the display for 5
minutes, the SCREEN SAVER will activate. To return to the previous window,
simply press any button.
DISPLAY INDICATORS
Failure: Call Service
Refer to Troubleshooting section
Failure: Water lter clogged
Water cannot be drained; water lter might be blocked
Failure: No water
No or not suξ€Ÿcient inlet water.
In the event of any failure, refer to the β€œTroubleshooting” section.
Key Lock
To activate the control panel lock, press and hold the button for
roughly 3 seconds. When the display visualises β€œKEY LOCK”, the control
panel is locked (except for the ON/OFF button ). This will prevent
accidental modications to wash cycles, especially when children are at
home. To deactivate the control panel lock, press and hold the
button for approximately 3 seconds.
Locked door indicator
When lit, the symbol indicates that the door is locked. To prevent any
damage, wait until the symbol turns oξ€ž before opening the door.
To open the door while a cycle is in progress, press the START/PAUSE
button ; if the symbol is oξ€ž, the door can be opened.
FIRST-TIME USE
Once the appliance has been installed, and before you use it for the rst
time, run a wash cycle with detergent and no laundry, using the wash
cycle .9 (60Β°)
DAILY USE
Prepare the laundry by following the suggestions appearing under the
β€œTIPS AND SUGGESTIONS” section.
- Press the ON/OFF button HOTPOINT” will appear on the display.; β€œ
- Open the door. Load the laundry while making sure not to exceed the
maximum load quantity indicated in the wash cycle table.
- Pull out the detergent dispenser drawer and pour the detergent into the
relevant compartments, as described in the β€œDETERGENT DISPENSER
DRAWER” section.
- Close the door.
- The machine automatically selects the default temperature and spin
speed set for the selected wash cycle.
- Select the desired wash cycle.
- Select the desired options.
- Press the START/PAUSE button to start the wash cycle; the door will
lock ( symbol on).
PAUSING A CYCLE
To pause the wash cycle, press the START/PAUSE button again. To start
the wash cycle from the point at which it was interrupted, press the
START/PAUSE button again.
OPENING THE DOOR, IF NECESSARY
Once a cycle starts, the symbol turns on to signal that the door cannot
be opened. While a wash cycle is running, the door remains locked. To
open the door while a cycle is under way, for example, to add or remove
garments, press the START/PAUSE button to pause the cycle. If the
symbol is not lit, the door may be opened. Press the START/PAUSE
button again to continue the cycle.
ADDING GARMENTS
An icon on the display will signal when additional garments can be
introduced into the washing machine, without decreasing the washing
performance. To add garments, rst stop the washing machine by
pressing the START/PAUSE button then open the door and insert
them.
Press the START/PAUSE button again to restart the wash cycle from
the point at which it was interrupted.
CHANGING A RUNNING WASH CYCLE
To change a wash cycle while it is in progress, pause the washing machine
using the START/PAUSE button, then select the desired cycle and press
the START/PAUSE button again.
! To cancel a cycle that has already begun, press and hold the ON/OFF
button. The cycle will be stopped and the machine will switch oξ€ž.
AT THE END OF THE WASH CYCLE
This will be indicated by the word β€œ ” on the display; when the CYCLE END
symbol switches oξ€ž, the door may be opened. Open the door, unload the
laundry and switch oξ€ž the machine. If you do not press ON/OFF button,
the washing machine will switch oξ€ž automatically after about 15 minutes.
OPTIONS
- If the selected option is incompatible with the set wash cycle or with
another previously selected option, in the menu the name of
incompatible option is represented in grey color and the wording β€œNot
available” will appear on the display, accompanied by a buzzer, the
option will not be activated.
Steam Hygiene
This option enhances washing performance by generating steam during
the wash cycle to remove any bacteria from the bres, which are treated
at the same time. Place the laundry in the drum, choose a compatible
programme and select option Steam Hygiene.
! The steam generated during the operation of the washing machine may
cause the porthole door to become hazy.
Start Delay
To set a delayed start for the selected cycle, press the corresponding
button repeatedly until the desired delay period is reached. When this
option has been activated, the selected values of delay start will appear
on the display. To remove the delayed start setting, press the button until
β€œ--:--” appears on the display.
Active Care
The detergent, premixed with water, creates an unique emulsion able
to better penetrate the bers of the garments, cleaning stains at even
low temperatures, preserving both colors and fabrics. These results are
obtained also due to the multiple diξ€žerent specic movements of the
drum which best take care of the garments.
Final Care
The washing machine will perform gentle tumbling through slow
rotations of the drum. Final Care option starts after the cycle ends for a
maximum duration of 6h and you can interrupt at any time by pressing
any button on control panel or turning the knob.
I Rapid / Eco
After pushing the button for the 1st time, option Rapid is selected and the
cycle duration will be reduced.
Otherwise after pushing for the 2nd time, option Eco is selected allowing
more energy saving.
Multi Rinse
By selecting this option, the eξ€Ÿciency of the rinse is increased and optimal
detergent removal is guaranteed. It is particularly useful for sensitive skin.
Press the button once, two or three times to select an additional 1, 2 or 3
rinses after the standard cycle rinse and remove all traces of detergent.
Press the button again to go back to the β€œNormal rinse” rinse type.
Easy Iron
By selecting this function, the wash and the spin cycles will be modied in
order to reduce the formation of creases.
Cold Wash
This option saves energy by not heating the water used to wash your
laundry – an advantage both to the environment and to your energy bill.
Instead, intensied wash action and water optimisation ensure great
wash results in the same average time of a standard cycle.
For the best washing results we recommend the usage of a liquid
detergent.
Prewash
Allows you to perform a prewash.
Temperature
Each wash cycle has a pre-dened temperature. To modify the temperature,
press the β€œ
60Β°
40Β°
” button. The value will appear on the display.
Spin
Each wash cycle has a pre-dened spin speed. To modify the spin speed,
press the button. The value will appear on the display.β€œ ”

Product specificaties

Merk: Hotpoint
Categorie: Wasmachine
Model: NLLCD 946 GS A EU

Heb je hulp nodig?

Als je hulp nodig hebt met Hotpoint NLLCD 946 GS A EU stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Wasmachine Hotpoint

Hotpoint

Hotpoint NDD 9636 BDA EE Handleiding

12 April 2024
Hotpoint

Hotpoint NDD 11725 DA EE Handleiding

10 April 2024
Hotpoint

Hotpoint RDD 1175238 KD VJ EU Handleiding

8 December 2023
Hotpoint

Hotpoint RDD 966238 WS VJ EU Handleiding

8 December 2023
Hotpoint

Hotpoint NDD 11726 DA IT Handleiding

7 December 2023
Hotpoint

Hotpoint AQSD723 EU/A N Handleiding

7 December 2023
Hotpoint

Hotpoint NLCD 945 SS A EU N Handleiding

7 December 2023
Hotpoint

Hotpoint SKP101 Handleiding

7 December 2023
Hotpoint

Hotpoint WMTG 723B IT Handleiding

7 December 2023
Hotpoint

Hotpoint SKS101 Handleiding

7 December 2023

Handleiding Wasmachine

Nieuwste handleidingen voor Wasmachine

Winia

Winia WVD-A08T1WK14B Handleiding

28 April 2024
Continental Edison

Continental Edison CELL7140IB Handleiding

28 April 2024
Bauknecht

Bauknecht WAT Smart Eco 12C Handleiding

27 April 2024
Bauknecht

Bauknecht B7 89 SILENCE EE Handleiding

27 April 2024
BEKO

BEKO WTE 7512 BSS Handleiding

26 April 2024
MPM

MPM -4610-PH-04 Handleiding

25 April 2024
Samsung

Samsung WW11DB8B95GH Handleiding

25 April 2024
SΓ΄lt

SΓ΄lt GGSFLW800W Handleiding

22 April 2024
Whirlpool

Whirlpool ZEN FSCR70421 Handleiding

21 April 2024
Samsung

Samsung WW90T4540TE Handleiding

18 April 2024