Hotpoint H3IC14BN7A0UK Handleiding
Hotpoint
Vaatwasser
H3IC14BN7A0UK
Bekijk gratis de handleiding van Hotpoint H3IC14BN7A0UK (4 pagina’s), behorend tot de categorie Vaatwasser. Deze gids werd als nuttig beoordeeld door 6 mensen en kreeg gemiddeld 4.5 sterren uit 3.5 reviews. Heb je een vraag over Hotpoint H3IC14BN7A0UK of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/4
ENQuick Guide
1
THANK YOU FOR BUYING A HOTPOINT PRODUCT.
In order to receive a more complete assistance, please register
your appliance on: www.hotpoint.eu/register
Before using the appliance carefully read Safety Instructions
guide.
PLEASE SCAN THE QR CODE ON YOUR
APPLIANCE IN ORDER TO HAVE MORE
DETAILED INFORMATION
FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on the dishes and on
the machine’s functional components.
• It is mandatory that the salt reservoir never be empty.
• It is important to set the water hardness.
The salt reservoir is located in the lower part of the dishwasher and must be
lled when the SALT REFILL indicator light in the control panel is lit.
1. Remove the lower rack and unscrew the reservoir cap
(anticlockwise).
2. Position the funnel and ll the salt reservoir (see gure)
right up to its edge (approximately 1 kg); it is not unu-
sual for alittle water to leak out.
3. Only the rst time you do this: ll the salt reservoir
with water.
4. Remove the funnel and wipe any salt residue away from the opening.
Make sure the cap is screwed on tightly, so that no detergent can get into
the container during the wash program (this could damage the water sof-
tener beyond repair).
Whenever you need to add salt, it is mandatory to complete the pro-
cedure before the beginning of the washing cycle to avoid corrosion.
WATER SOFTENING SYSTEM
Water softener automatically reduces water hardness, consequently prevent-
ing scale buildup on heater, contributing also to better cleaning eciency.
This system regenerates itself with salt, therefore it is required to rell
salt container when empty.
Frequency of regeneration depends on water hardness level setting - regen-
eration takes place once per Eco cycles with water hardness level set to . 6 3
Regeneration process starts in nal rinse and nishes in drying phase, be-
fore cycle ends.
• Single regeneration consumes: ~3.5L of water;
• Takes up to 5 additional minutes for the cycle;
• Consumes below 0.005kWh of energy.
A
C
D
FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse aid
dispenser Ashould be lled when the RINSE AID
REFILL indicator light in the control panel is lit.
NEVER pour the rinse aid directly into the ap-
pliance tub.
FILLING THE DETERGENT DISPENSER
To open the detergent dispenser use the opening device . Introduce the C
detergent into the dry dispenser only. Place the amount of detergent for D
pre-washing directly inside the tub.
The detergent dispenser automatically opens up at the right time accord-
ing to the program.
If all-in-one detergents are used, we recommend using the TABLET button,
because it adjusts the program so that the best washing and drying results
are always achieved Usage of detergent not designed for dishwashers
may cause malfunction or damage to the appliance.
CONTROL PANEL
FIRST TIME USE
PROGRAMS TABLE
1. On-O/Reset button with indicator light
2. Program selection button
3. Salt rell indicator light
4. Rinse Aid rell indicator light
5. Program number and delay time indicator
6. Tablet (Tab) indicator light
7. Display
8. 3D Zone Wash indicator lights
9. 3D Zone Wash button
10. Delay button
11. START/Pause button with indicator light
/ Tablet (Tab)
1 2 3 4 5 6 7 8 9 10
11
Program Programs description
Drying
phase
ActiveDry
Available options
*)
Duration
of wash
program
(h:min)
**)
Water
consumption
(litres/cycle)
Energy
consumption
(kWh/cycle)
1.
Eco 50°- Eco program is suitable to clean normally soiled table-
ware. that for this use. it is the most ecient program in terms of
its combined energy and water consumption. and that it is used to
assess compliance with the EU Ecodesign legislation.
3:10 9,5 0,75
2.
Auto Intensive 65° - Automatic program for heavily soiled dishes
and pans (not to be used for delicate items).
2:00 - 3:10 14,0 - 17,0 1,50 - 1,85
3.
Auto Mixed 55° - Automatic program for normally soiled pans and
dishes.
1:30 - 2:30 14,5 - 16,0 1,15 - 1,30
4.
Auto Fast Wash 50° - Automatic program for limited quantity of
normally soiled crockery. Ensures optimal cleaning performance in
shorter time.
- -
0:55 - 1:20 13,0 - 14,5 1,15 - 1,25
5.
Rapid 30’ 45° - Program to be used for half load of lightly-soiled
dishes with no dried food residues. Does not have drying phase.
-
-
0:30 9,0 0,50
6.
Silent - 50° Suitable for night-time operation of the appliance.
With the lowest noise.
3:30 15,0 1,15
7.
Sanitizing - 65° Normally or heavily soiled crockery, with addi-
tional antibacterial wash. Can be used to perform maintenance of
the dishwasher.
-
1:40 10,0 1,30
8.
Soak - Use to refresh crockery planned to be washed later.
No detergent to be used with this program.
-
-
0:12 4,5 0,01
9.
Self- Clean 65° - Program to be used to perform maintenance ofthe
dishwasher, to be carried out only when the dishwasher is EMPTY
using specic detergents designed for dishwasher maintenance.
-
-
0:50 8,0 0,85
2
Quick Guide
EN
TABLET (Tab) If you use powder or liquid detergent, this option -
should be o.
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected
program (see PROGRAMS TABLE), the corresponding LED ashes rapidly 3 times and beeps will sound. The option will not be enabled.
3D ZONE WASH - Option works with one rack at once. In particular,
we recommend to use it with Mixed and Intensive cycles - thanks to
the additional 3D water jets placed on the bottom o the cavity,
3D ZONE WASH option allows to save energy or to increase the washing
performance of the dishwasher.
OPTIONS AND FUNCTIONS
Please scan the on your product in order to have more detailed information. QR code
ActiveDry - is a convection drying system which automatically opens the
door during/after the drying phase to ensure exceptional drying perfor-
mance every day. The door opens at a temperature that is safe to your kitch-
en furniture.
DELAY - The start time of the program may be delayed for a period of
time between and hours.1 12
The DELAY function cannot be set once a program has been started.
UPPER RACK
Load delicate and light
dishes: glasses, cups,
saucers, low salad
bowls.
(loading example for the
upper rack)
FOLDABLE
FLAPS WITH
ADJUSTABLE
POSITION
LOWER RACK
For pots, lids, plates, salad bowls, cutlery etc.
Large plates and lids should ideally be placed
at the sides to avoid interferences with the
spray arm.
The lower rack has tip-up supports which can
be used in avertical position when arranging
plates or in a horizontal position (lower) to
load pans and salad bowls easily.
(loading example for the lower rack)
LOADING THE RACKS
CAPACITY: 14 standard place-settings
CUTLERY BASKET
The basket is equipped with top grilles
for improved cutlery arrangement. The
cutlery basket should be positioned
only at the front of the lower rack.
Knives and other utensils with sharp
edges must be placed in the cutlery
basket with the points facing down-
wards or they must be positioned
horizontally in the tip-up compart-
ments on the upper rack.
SLIDING TRAY
The upper rack is tted with
a sliding tray which can be
used to hold small crockery
and cutlery. For optimum
washing performance, avoid
positioning bulky crockery
directly below the tray. The
tray is removable.
ZONE WASH 3D
3D Zone Wash uses addi-
tional water jets located
both: in the lower and up-
per part of the dishwasher
(marked with orange
color) to wash more inten-
sively heavily soiled items
by increasing water cover-
age on dishes.
More information in the Daily Reference Guide on website.
CLEANING AND MAINTENANCE
CLEANING THE FILTER ASSEMBLY CLEANING THE SPRAY ARMS
A
A
B
C
In case you nd foreign objects (such as broken glass, porcelain, bones, fruit seeds etc.)
please remove them carefully.
NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).
To remove the upper spray arm,
turn the plastic locking ring in a
clockwise direction.
The lower spray arm may be
removed by pulling it up-
wards.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020.
Note for Test Laboratories: For information on
comparative EN testing conditions, please send an email to the following address: dw_test_support@europeanappliances.com
Pre-treatment of the dishes is not needed before any of the programs.
*) Not all options can be used simultaneously.
**) Values given for programs other than the program Eco are indicative only. The actual time may vary depending on many factors such as temperature and
pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options and sensor cali-
bration. The sensor calibration can increase program duration up to 20 min.
ENQuick Guide
3
Policies, standard documentation, ordering of spare parts and additional product information can be found by:
• Using QR code on your product.
• Visiting our website docs.hotpoint.eu and parts-selfservice.europeanappliances.com
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet).
When contacting our After-sales Service, please state the codes provided on your product‘s identication plate.
The model information can be retrieved using the QR-Code reported in the energy label. The label also includes the model
identier that can be used to consult the portal of the registry at https://eprel.ec.europa.eu.
IEC 436
:
In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list. For other errors or issues
please contact authorized After-sales Service which contact details can be found in the warranty booklet. Spare parts will be available for a period
of either up to 7 or up to 10 years, according to the specic Regulation requirements.
TROUBLESHOOTING
Please scan the on your product in order to have more detailed information.QR code
PROBLEMS POSSIBLE CAUSES SOLUTIONS
The dishwasher does
not ll the water.
Display shows: H,
6 and On/O LED is
blinking rapidly
No water in the water supply or the tap is closed.
Make sure there is water in the water supply or the tap running.
The inlet hose is bent.
Make sure the inlet hose is not bent (see INSTALLATION) reprogram the dish-
washer and reboot.
The sieve in the water inlet hose is clogged; it is
necessary to clean it
After having carried out the verication and cleaning, turn o and turn on
the dishwasher and restart a new program.
Dishwasher nishes
the cycle prematurely.
Display shows: and 15
On/O LED is blinking
rapidly
Drain hose positioned too low or siphoning
into home sewage system.
Check if end of drain hose is placed at correct height (see INSTALLATION).
Check for siphoning into home sewage system, install air admittance valve if
necessary.
Air in water supply. Check water supply for leaks or other issues letting air inside.
Detergent leaks.
Depends on the liquid detergent used and
can be emphasized in case of delay option is
activated.
Small leaks will not cause machine malfunction and can be avoided by
changing liquid detergent type or using tablets.
Product specificaties
| Merk: | Hotpoint |
| Categorie: | Vaatwasser |
| Model: | H3IC14BN7A0UK |
Heb je hulp nodig?
Als je hulp nodig hebt met Hotpoint H3IC14BN7A0UK stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Vaatwasser Hotpoint
15 Juni 2025
15 Juni 2025
20 Februari 2025
7 Januari 2025
2 December 2024
2 December 2024
2 December 2024
2 December 2024
2 December 2024
2 December 2024
Handleiding Vaatwasser
- Elektron
- De Dietrich
- Vivax
- Black Decker
- Whirlpool
- Teka
- Proline
- Benavent
- Ecotronic
- Westinghouse
- Orima
- Newpol
- Balay
- Wisberg
- Godrej
Nieuwste handleidingen voor Vaatwasser
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025