HOTO QWLSD011 Handleiding

Bekijk gratis de handleiding van HOTO QWLSD011 (52 pagina’s), behorend tot de categorie Schroefmachine. Deze gids werd als nuttig beoordeeld door 18 mensen en kreeg gemiddeld 4.5 sterren uit 2 reviews. Heb je een vraag over HOTO QWLSD011 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

1

1

2

3

5

6

7

Screwdriver Bit

Bit Holder

Light

Torque Knob

Forward/Reverse rotation

button

Charging Indicator

Type-C Charging Port

02 How to Use

01 Product Overview

Read this manual carefully before use, and retain it for future

reference.

Thank you for purchasing the HOTO 3.6V Screwdriver Kit.

7

1

2

3

4

6

5

Turning the product on/off

Turn the torque knob to level I, II,

or III then press the forward/re-

verse rotation button to start the

screwdriver.

Release the forward/reverse rotation

button to pause the screwdriver.

Turning the light on/off

The light automatically turns on

when the screwdriver is turned on.

The light will turn off 10 seconds

after the forward/reverse rotation

button is released.

Forward/Reverse rotation button

Press the end of the rotation

button to tighten a screw.

Press the end of the rotation

button to remove a screw.

Torque knob

When the torque knob is set to level I, it is in low torque mode.

When the torque knob is set to level II, it is in medium torque mode.

When the torque knob is set to level III, it is in high torque mode.

Indicator status

If the battery level drops below 20% when the screwdriver is

in use, the indicator will blink red quickly, and it will turn off

three seconds after the button is released.

When charging, the indicator will slowly blink white.

When the battery is fully charged, the indicator will stay white.

This screwdriver is equipped with a universal Type-C

charging port.

Product specificaties