Hoshizaki HS-5255 Handleiding
Hoshizaki
Niet gecategoriseerd
HS-5255
Bekijk gratis de handleiding van Hoshizaki HS-5255 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 9 mensen en kreeg gemiddeld 4.4 sterren uit 5 reviews. Heb je een vraag over Hoshizaki HS-5255 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/2
1
2A8478-013
Hoshizaki Prison Kit
HS-5245, HS-5246, HS-5252, HS-5253,
HS-5254, HS-5255, HS-5426, HS-5427
For use with Hoshizaki Ice Machines: KM-350M_J, KM-520M_J, KM-660M_J,
KM-901M_J, KM-1301S_J/3, and KM-1900S_J/3
Check to ensure that all parts are included:
Index
No. Description
Kit
Number Model
Part
Number Qty
1 Front Panel HS-5426 KM-350MAJ, KM-520MAJ, KM-660MAJ 3B0020G01 1
HS-5427 KM-350MWJ, KM-520MWJ, KM-520MRJ, KM-660MWJ, KM-660MRJ 1A5320G01 1
HS-5245 KM-901MAJ 2A8612G01 1
HS-5246 KM-901MWJ 2A8612G02 1
HS-5252 KM-1301SAJ/3 2A7289G01 1
HS-5253 KM-1301SWJ/3 2A7251-01 1
HS-5254 KM-1900SAJ/3 2A7292G01 1
HS-5255 KM-1900SWJ/3 2A7252-01 1
2 Torx Screw (4 mm-small) All All 7PP2I0812 20
3 Torx Screw (4 mm-large) All All 7PP2-0410 6
4 Torx Screw (5 mm) All All 7PP2-0512 3
5 Torx Pin Bit (small) All All 7PP2-0001 1
6 Torx Pin Bit (large) All All 7PP2-0002 1
WARNING
• Only qualied service technicians should install this kit to reduce the risk of death, electric shock, serious injury, or re.
• Move the icemaker control switch to the "OFF" position and turn off the power supply before servicing. Lockout/Tagout to
prevent the power supply from being turned back on inadvertently.
• CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are securely in place after any maintenance is
done to the appliance. Make sure that none have fallen into the ice storage bin.
• No installation or service should be undertaken until the technician has thoroughly read these instructions.
Installation Instructions
1) Turn off the power supply. Lockout/Tagout to prevent the power supply from being turned on inadvertently.
2) Remove and discard the front panel and screw(s). See Fig. 1 and Fig. 2.
3) Place the new front panel in its correct position and secure with Torx screw(s) (4 mm-large) provided in this kit.
4) Remove all screws from the sides of the appliance (KM-1301 and KM-1900S_J/3) and replace with Torx screws (4 mm-large)
provided in this kit. See Fig. 2.
Fig. 2
Model Shown:
KM-520MAJ
Fig. 1
4 mm-large
Model Shown:
KM-1900SAJ3
4 mm-large
4 mm-large
4 mm-large
Side
Side
2
2A8478-013
5) Remove all but the drain valve tting screws from the rear of the appliance and replace with Torx screws (4 mm-small) provided in
this kit. See Fig. 3 and Fig. 4.
6) Remove the drain valve tting screws and replace them with Torx screws (5 mm) provided in this kit.
7) Dispose of any remaining screws.
4 mm-small
4 mm-small
5 mm
4 mm-small4 mm-small
4 mm-small
4 mm-small
5 mm
Model Shown:
KM-520MWJ
Model Shown:
KM-1900SWJ3
Fig. 3
Fig. 4
Drain Valve
Fitting
Drain Valve
Fitting
4 mm-small
Product specificaties
| Merk: | Hoshizaki |
| Categorie: | Niet gecategoriseerd |
| Model: | HS-5255 |
Heb je hulp nodig?
Als je hulp nodig hebt met Hoshizaki HS-5255 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Hoshizaki
22 Juni 2025
22 Juni 2025
22 Juni 2025
18 Juni 2025
17 Juni 2025
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
Handleiding Niet gecategoriseerd
- K&M
- Nethix
- Teradek
- Hayter
- VariZoom
- Needit
- Phonak
- Speco Technologies
- Redback Technologies
- Electronics International
- Antelope
- Schatten Design
- Turmix
- Emmaljunga
- BT
Nieuwste handleidingen voor Niet gecategoriseerd
22 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025
22 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025
21 Juni 2025