Hoshizaki F-2001MRJZ3 Handleiding

Bekijk gratis de handleiding van Hoshizaki F-2001MRJZ3 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 35 mensen en kreeg gemiddeld 4.7 sterren uit 5 reviews. Heb je een vraag over Hoshizaki F-2001MRJZ3 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Modular Ice Machine

Item #:

Project:

Qty:

AIA#:

618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com

© HOSHIZAKI AMERICA, INC.

Cube Dimensions*

* approximate size in inches, image not to scale

†

(with condenser)

Features

• Flaker - Up to 2098 lbs. of ice production per

24 hours

• Cubelet - Up to 1832 lbs. of ice production per

24 hours

• Mount two units, side-by-side, in only 60” of floor

space for double the amount of ice production

• 2-second flush cycle every hour

• Flush cycle removes sediment for cleaner ice

• R-404A Refrigerant

Durable stainless steel exterior

Advanced CleanCycle24

TM

design

Stainless steel auger with greaseless

bearing

Available on Bins:

• Ambient Temp Range 45 - 100°F

• Water Temp Range 45 - 90°F

• Water Pressure 10 - 113 PSIG

• Voltage Range 187-253V

• If GFCI is required, a GFCI breaker MUST be used in

lieu of GFCI receptacle

Operating Limits

Plumbing

• Panels easily removed and all components

accessible for service.

• Allow 6” (15 cm) clearance at rear and sides for proper

air circulation and ease of maintenance/service. Allow

24” (61 cm) clearance at top for removal of auger.

Service

W x D x H

Hoshizaki reserves the right to change specifications without notice.

3 Year Parts & Labor on entire machine. 5 Year Parts on Compressor; air-cooled

condenser coil. Valid in United States, Canada, Puerto Rico and U.S. Territories.

Contact factory for warranty in other countries.

Warranty:

F-2001M_J(Z)(3)(-C)

07/02/24

Item # 13255

Top kit may be required. See Bin Spec Sheets. *Two unit application only.

B-1300SS

B-1500SS*

B-250SF

B-500SF

B-900SF

B-1150SS

TM

30" x 27

1/2

" x 34

7/16

"

B-700SF

B-800SF

F-2001MRJZ

Remote Air-Cooled Flaker 1-Phase

Shown on optional bin B-700

1/2”

3/8”

3/4”

3/4”

B-1650SS*

Air / Water Temp

Lbs. per 24 hours

Condenser

Model

70°/ 50°F90°/ 70°F

ICE PRODUCTION

Potable

Gal. per 100 lbs.

Condenser

Gal. per 100 lbs.

Heat

Rejection

BTU/hr.

Voltage

WATER USAGE

90°/ 70°F90°/ 70°F

ELECTRICAL

90°/ 70°F

kWh Used

per 100 lbs.

Amperage

2043

F-2001MWJ

1840

Water

Flaker

12.0

109

3.1930A16.4A

208-230V/60/1

19,500310 / 342

Circuit

Wires

(including ground)

Net / Ship

Weight (lbs.)

Refrigerant

Charge Amount

4

2 lbs. 0.1 oz.

Power cord not included. Must be hard-wired at site.

1”

FlakedCubelet

F-2001M_J(Z)F-2001MRJ(Z)-C

F-2001MWJ

Water-Cooled Flaker

F-2001MRJZ-C

Remote Air-Cooled Cubelet

F-2001MRJZ3

Remote Air-Cooled Flaker 3-Phase

1832

F-2001MRJZ-C

1500

Remote

Cubelet

12.0

N/A

4.3530A19.9A

208-230V/60/1

20,300326 / 360

4

8 lbs. 2.5 oz.

(15 lbs. 14 oz.)

†

2098

F-2001MRJZ3

1675

12.0

N/A

3.9020A18.1A

208-230V/60/3

19,500326 / 360

4

8 lbs. 2.5 oz.

(15 lbs. 14 oz.)

†

2073

F-2001MRJZ

1660

Remote

Flaker

12.0

N/A

3.8130A19.9A

208-230V/60/1

16,500326 / 360

4

8 lbs. 2.5 oz.

(15 lbs. 14 oz.)

†

3 Phase1 Phase

Remote

Flaker

• Icemaker Water Supply Line: Minimum 1/4” Nominal ID

Copper Water Tubing or Equivalent

• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe

or Equivalent

Water-Cooled Model (Lines Must Be Independent of Icemaker)

• Condenser Water Supply Line: Minimum 1/4” Nominal ID

Copper Water Tubing or Equivalent

• Condenser Drain/Return Line: Minimum 1/4” Nominal ID

Hard Pipe (open drain system) or Copper Water Tubing

(closed loop system) or Equivalent

Min. Circuit/

Max. Fuse

Size

Product specificaties