Hosa USQ-110 Handleiding

Bekijk gratis de handleiding van Hosa USQ-110 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 10 mensen en kreeg gemiddeld 4.0 sterren uit 2 reviews. Heb je een vraag over Hosa USQ-110 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

TRACKLINK Guitar to USB Interface

Connection and Setup Procedures

Thank you for purchasing the TRACKLINK Guitar to USB Interface by Hosa

Technology. This interface enables you to connect your electric guitar, bass, or

keyboard directly to your computer. To get linked and start tracking, please follow these

instructions carefully:

Connection Procedure

1.Plug the ¼ in TS connector into your instrument

2.Plug the USB connector into your PC

3.Follow the appropriate setup procedure below

Mac OS 10 Setup Procedure

1.Go to Apple Menu > System Preferences and click Sound

2.Click the “Input” tab

3.Select “USB PnP Sound Device”

4.Input level of your computer should reflect incoming signal*

5.Click the “Output” tab

6.Verify your normal output option is selected**

7.Close window

Windows 10 Setup Procedure

1.Allow Windows to install the driver before proceeding

2.Go to Start Menu > Windows System > Control Panel

3.In Category View, open Hardware & Sound

4.Open Sound

5.In “Playback” tab, select your desired playback option and click the

“Set Default” button**

6.Click the “Recording” tab

7.Select “USB PnP Sound Device” and click the “Set Default” button

8.You can verify and adjust input levels by clicking the “Properties” button*

9.If you made any changes, click the “Apply” button

10.Click the “Okay” button

Windows 7 Setup Procedure

1.Allow Windows to install the driver before proceeding

2.Go to Start > Control Panel

3.In Category View, open Hardware & Sound

4.Open Sound

5.In “Playback” tab, select your desired playback option and click the

“Set Default” button**

6.Click the “Recording” tab

7.Select “USB PnP Sound Device” and click the “Set Default” button

8.You can verify and adjust input levels by clicking the “Properties” button*

9.If you made any changes, click the “Apply” button

10.Click the “Okay” button

Product specificaties