Horstmann HCT2 Handleiding

Bekijk gratis de handleiding van Horstmann HCT2 (1 pagina’s), behorend tot de categorie Thermostaat. Deze gids werd als nuttig beoordeeld door 101 mensen en kreeg gemiddeld 4.9 sterren uit 5 reviews. Heb je een vraag over Horstmann HCT2 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

HCT2 INSTALLATION / USER

INSTRUCTIONS

Horstmann Controls Limited

Bristol

BS4 1UP

Email: sales@horstmann.co.uk

W ebsite:

WIRING CONNECTIONS

Model HCT2 Cylinder Thermostat

With an adjustable temperature range of between 20

oC and 90o

C, the HCT2 Cylinder

thermostat is suitable for mounting on either domestic hot water cylinders or larger diame-

ter heating pipes.

Features

Abimetallic sensor ensures accurate switching and control.

A.strap is included for easy fixing to cylinder

Installation Instructions

The HCT2 should usually be strapped on to the cylinder at a height of about one-third up

from the base - the strap should be tight for good thermal contact. It should be adjusted to

around 60oC. If set too high it may give rise to scalding, and if set too low it will increase

risk of the growth of legionelle bacteria, which could lead to serious heath problems.

Specification

Operating voltage 230v 50/60 Hz

Switching Capacity 16 amps at 230V AC

Contact configuration SPDT

Switching Differential 8oC (approx)

Enclosure protection IP40

Cylinder thermostat Key:

COM = Common supply

CALL= Call for heat or break on

rise SAT = Satisfied on rise

Product specificaties