Horizon Fitness 7.0AT Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Horizon Fitness 7.0AT (10 pagina's) in de categorie Loopband. Deze handleiding was nuttig voor 59 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
7.0AT- TREADMILLS 03
TM1 002C
SERVICE MANUAL
ISSUED - -07 2022 06
JOHNSON HEALTH INDUSTRY (VIETNAM)
V1
S I ERIAL NUMBER NFORMATION
Table of Contents
7.0AT-03
5
Service Manual
Product Record
ENTER YOUR SERIAL NUMBER AND MODEL NAME IN THE BOXES BELOW:
Refer to the SERIAL NUMBER and MODEL NAME when calling for service.
P M REVENTIVE AINTENANCE
Table of Contents
7.0AT-03
8
Service Manual
The running belt has been properly adjusted at the factory before it was shipped. At mes the belt can
move o-center during shipment. Before operang the treadmill, make sure the belt is centered and
remains centered to maintain smooth operaon.
If the running belt is too far to the right side: With the
treadmill running at 1 mph, turn the le adjustment bolt
counter-clockwise ¼ turn at a me (using the supplied
Allen wrench). Check the belt alignment. Allow belt to run
a full cycle to gauge if more adjustment is needed. Repeat
if necessary, unl the belt remains centered during use.
If the running belt is too far to the le side: With the
treadmill running at 1mph, turn the le adjustment bolt
clockwise ¼ turn at a me (using the supplied Allen
wrench). Check the belt alignment. Allow belt to run a full
cycle to gauge if more adjustment is needed. Repeat if
necessary, unl the belt remains centered during use.


Product specificaties

Merk: Horizon Fitness
Categorie: Loopband
Model: 7.0AT

Heb je hulp nodig?

Als je hulp nodig hebt met Horizon Fitness 7.0AT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Loopband Horizon Fitness

Handleiding Loopband

Nieuwste handleidingen voor Loopband