Hoover H3WPSD496TAMB6-S Handleiding

Hoover Wasmachine H3WPSD496TAMB6-S

Lees hieronder de 📖 handleiding in het Nederlandse voor Hoover H3WPSD496TAMB6-S (19 pagina's) in de categorie Wasmachine. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/19

Reference Manual

Panel descriptions 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Top panel ....................................................2

Rear panel (connecting your equipment) ........................3

Installing the batteries .......................................3

Outputting sound 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Turning the power on/o ......................................4

Turning the power on ........................................4

Turning the power o .......................................4

Setting the connected device type ..............................4

Selecting a guitar amp type (output select) .....................4

Adjusting the volume (output level) ............................4

Tuning your guitar (tuner) .....................................4

Eect signal chain .............................................5

Saving/recalling sounds (memory mode) 6 . . . . . . . . . . . . . . . . . . .

How the patches are congured ................................6

Switching between manual/memory mode ......................6

Setting what happens when switching from memory mode to

manual mode ...............................................6

Selecting a sound (patch) ......................................6

Checking the knob positions ..................................6

Conguring what happens when switching banks ...............7

Saving a sound (patch write) ...................................7

Changing the settings for sounds (memory edit mode) ...........7

Useful functions 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Adding eects that follow your tempo (tap tempo) ...............8

Setting the modulation speed or delay time with the pedal .......8

Performing with phrase loops ..................................9

Conguring the [CTL] (control) pedal functions ................ 10

Setting the pedal function .................................. 10

Conguring the pedal operations ........................... 10

Connecting to and using an external eect unit via

the SEND/RETURN jacks ..................................... 11

Calibrating the expression pedal ............................. 11

Connecting to your computer via USB . . . . . . . . . . . . . . . . . . . . .12

Installing the USB driver ..................................... 12

Transmitting/receiving audio signals between a computer and

the ME-90 .................................................. 12

USB audio settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Transmitting/receiving MIDI data between a computer and

the ME-90 .................................................. 12

Loading IR data to use this unit as a speaker simulator .......... 13

Wireless connection with a mobile device . . . . . . . . . . . . . . . . . 14

Attaching the BT-DUAL ...................................... 14

Listening to sound via wireless connection with a mobile device . . 14

Bluetooth® 14 audio functionality .............................

Registering a mobile device (pairing) ........................ 14

Connecting an already-paired mobile device ................. 15

Disabling Bluetooth functionality ............................ 15

Controlling the ME-90 from a mobile device app ............... 15

Connecting to the app ..................................... 15

Operating the ME-90 wirelessly with an EV-1-WL/FS-1-WL ...... 15

Conguring the device overall (system settings) . . . . . . . . . . . 16

Parameter list ............................................. 16

Restoring the factory settings (factory reset) . . . . . . . . . . . . . . 17

Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Troubleshooting ............................................ 18

Main specications 19 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Contents

Panel descriptions

Eect conguration knobs

Use these knobs to congure the various eects built into the

ME-90.

* For details on the eect parameters, refer to the “ME-90 Parameter

Guide” (BOSS website).

Display

Shows various information for the ME-90.

MEMO

When the batteries are running low, the BATTERY LOW

indicator blinks on the display.

Replace the batteries with new ones.

[EXIT], [WRITE], [CTL], [EDIT] buttons

Button Explanation

[EXIT] Press to return to the previous screen or to undo an

operation.

[WRITE] Press to save your patch settings or to execute a

copy operation (p. 6).

[CTL] In memory mode, this congures the operation of

the [CTL] pedal (p. 6).

[EDIT] Enters memory edit mode (p. 7).

Expression pedal

Press the toe end of the pedal to switch the pedal eect on/o

(the PEDAL FX indicator turns on/o).

Pedal eect Indicator Pedal operation

O Unlit Volume pedal

On Lit

Controls the eect (such

as wah) that you set using

the [PEDAL FX] knob.

[MEMORY/MANUAL] pedal

Switches between memory mode and manual mode (p. 6).

Keep this pressed for two seconds or more to turn the tuner on (p.

4).

Pedal switch

Switches between banks and patches when the unit is in memory

mode. In manual mode, this turns each eect on/o.

When in memory mode

Use the pedal switches to switch between banks and patches.

Switch Function

[BANK ], [BANK ]É Ç Switches between banks.

[1]–[4] Switches between patches.

[CTL]

Performs the operation that’s set in

“Conguring the [CTL] (control) pedal

functions” (p. 10).

When in manual mode

Use the pedal switches to individually switch each eect (COMP,

OD/DS, MOD, DELAY, AMP, EQ, REV) on/o.

What is “memory mode”?

The eect combinations and settings (sounds) are recalled as

“patches”. There are 72 patches.

Out of the 72 patches, 36 (4 patches × 9 banks) can be saved in

the user banks (9 banks of presets and 9 user banks).

You can use the pedal to instantly switch between banks and

patches.

What is “manual mode”?

This mode lets you use the pedals to turn each eect on/o. This

lets you use this unit as if you were individually switching the

compact eects on an eect unit board on/o.

[OUTPUT LEVEL] knob

Adjusts the volume of the OUTPUT jacks and PHONES jack.

Top panel

5 6

Panel descriptions

INPUT jack

Connect your guitar here.

OUTPUT jacks

Connect these to your guitar amp, mixer or other audio

equipment. For a mono connection, use only the L/MONO jack.

Gt. AMP/LINE switch

Set this to “Gt. AMP” when connecting this unit to a guitar amp.

Set this to “LINE” when connecting this unit to a mixer or powered

speakers.

This lets you set the best output for the output destination.

PHONES jack

Connect a pair of headphones (sold separately) or a recorder that

uses a stereo mini plug cable. Set the Gt. AMP/LINE switch to

“LINE” when using this jack.

SEND/RETURN jacks

Connect an external eect unit here.

You can connect an external eect unit between the SEND jack

and RETURN jack, and use it as one of the ME-90’s eect units (p.

11).

Bluetooth ADAPTOR jack

Connect the Bluetooth® Audio MIDI Dual Adaptor (part number

BT-DUAL) to wirelessly play back music from your mobile device

such as a smartphone or tablet (hereafter “mobile device”), or to

edit the eects using an app on your mobile device (p. 14).

Use the volume control on your audio player to adjust the volume

of signal output received from the OUTPUT jacks and PHONES

jack.

Ground terminal

* Connect this to an external earth or ground if necessary.

USB COMPUTER port

Connect this port to your computer via USB cable. This lets you

transmit/receive audio signals between the ME-90 and your

computer, use the ME-90 dedicated app to edit the sounds and so

on (p. 12).

[POWER] switch

This switches the power on and o (p. 4).

DC IN jack

Accepts connection of an AC adaptor (BOSS PSA-S series; sold

separately).

* Use the cord hook to secure the cord of the AC adaptor as shown

in the illustration.

* To prevent malfunction and equipment failure, always turn

down the volume, and turn o all the units before making any

connections.

Installing the batteries

Install the batteries into the battery case at

the bottom of this unit. Make sure that the

batteries face the right way.

* When turning the unit over, be careful so

as to protect the buttons and knobs from

damage. Also, handle the unit carefully; do

not drop it.

* We recommend that you keep batteries installed in the unit even

though you’ll be powering it with the AC adaptor. That way, you’ll

be able to continue a performance even if the cord of the AC

adaptor gets accidentally disconnected from the unit.

* If you handle batteries improperly, you risk explosion and uid

leakage. Make sure that you carefully observe all of the items

related to batteries that are listed in “USING THE UNIT SAFELY” and

“IMPORTANT NOTES” (leaet “USING THE UNIT SAFELY”).

WARNING

Handle batteries carefully

If used improperly, you risk the dangers of uid leakage, overheating,

combustion, explosion, etc. Carefully observe the following:

¹Do not heat, disassemble, or toss them into a re or water.

¹Do not expose them to sunlight, ame, or any other source of

extreme heat.

¹Do not attempt to charge a dry cell battery.

+ –

+–

Rear panel (connecting your equipment)

1 2 3 4 5 6 7 8 9 10

Product specificaties

Merk:	Hoover
Categorie:	Wasmachine
Model:	H3WPSD496TAMB6-S
Apparaatplaatsing:	Vrijstaand
Soort bediening:	Buttons, Rotary
Kleur van het product:	Wit
Deurscharnieren:	Links
Ingebouwd display:	Ja
Gewicht:	65000 g
Breedte:	600 mm
Diepte:	530 mm
Hoogte:	850 mm
Type stekker:	Type F
Type lader:	Voorbelading
Deurkleur:	Wit
Materiaal trommel:	Roestvrijstaal
Trommelinhoud:	58 l
Uitgestelde start timer:	Ja
Startvertraging:	24 uur
Resterende tijd indicatie:	Ja
Wi-Fi-besturing:	Ja
Energie-efficiëntieklasse:	A
Gewicht verpakking:	67000 g
Breedte verpakking:	650 mm
Diepte verpakking:	560 mm
Hoogte verpakking:	890 mm
Draairichting deur verwisselbaar:	Nee
Energieverbruik wassen:	0.45 kWu
Waterconsumptie per cyclus:	46 l
Centrifuge-droger klasse:	B
Geluidsniveau (wassen):	- dB
Onbalanscontrolesysteem:	Ja
Aanpasbare centrifugesnelheid:	Ja
Maximale centrifugesnelheid:	1400 RPM
Geluidsemissieklasse:	B
Inverter technologie:	Ja
Geluidsniveau bij centrifugeren:	76 dB
Cyclustijd (max):	228 min
Energieverbruik per 100 cycli:	45 kWu
Aan-/uitknop:	Ja
Automatische lastherkenning:	Ja
Instelbare temperatuur:	Ja
Smartphone ondersteuning op afstand:	Ja
Bedieningsapps ondersteund:	hOn
Nominale capaciteit:	9 kg
AC-ingangsspanning:	220 - 240 V
Type beeldscherm:	LED
Energie-efficiëntieschaal:	A tot G
Type motor:	Borstelloos
Wasprogramma's:	Stoom
Alles-in-één wasprogramma (All-in-one):	Alles in één