Honeywell X1N Handleiding


Bekijk gratis de handleiding van Honeywell X1N (56 pagina’s), behorend tot de categorie Thermostaat. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.3 sterren uit 2 reviews. Heb je een vraag over Honeywell X1N of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/56
X1N Non-Programmable
Thermostat
RTH11B/RTHC11B
Installation and User
Guide
M39547
Package includes:
Screws and
anchors
UWP™
Wall Plate
Thermostat
Literature
M39561
This document contains the following sections:
1) Installation and Wiring
2) Configuration
3) System Operation
4) Troubleshooting
2
Removing the old thermostat
2 Check that your system is off.
Change the temperature on your
old thermostat to be above room
temperature in heat mode or below
it in cool mode. If you don’t hear the
system turn on within 5 minutes,
the power is off. Note: If you have a
digital thermostat that has a blank
display, skip this step
1 Turn power OFF.
To protect yourself and your equipment,
turn off the power at the breaker box
or switch that controls your heating/
cooling system. Note that some
systems may have separate heating
and cooling breakers.
3 Remove the old thermostat’s faceplate.
On most thermostats, you can take off the
faceplate by grasping and gently pulling. Some
thermostats may have screws, buttons, or clasps.
Do not remove any wires from your thermostat
at this time!
75
75
Breaker box
Switch
READ AND SAVE THESE INSTRUCTIONS
Tools you will need
Small flat head scr
ewdriver
Phillips scr
ewdriver
Pencil
Le
vel
M36270
Wire stripper
Needle-nose pliers
Drill and
drill bit
Tools you may need
Installation and Wiring
M39590
OFF
OFF
ON


Product specificaties

Merk: Honeywell
Categorie: Thermostaat
Model: X1N

Heb je hulp nodig?

Als je hulp nodig hebt met Honeywell X1N stel dan hieronder een vraag en andere gebruikers zullen je antwoorden