Honeywell RLV310 Handleiding


Pagina's 2 Engels Thermostaat

Bekijk de handleiding van Honeywell RLV310 gratis online of download de PDF. 55 mensen vonden deze handleiding nuttig. Vraag over dit model? Stel een vraag

RLV310 69-1854 6/27/05 1/2
This thermostat can be used to control a electric heating system such
as an baseboard heater, a radiant ceiling, a radiant floor, a convector,
etc. See minimum and maximum load requirement in section 5.
The thermostat cannot be used with the following:
•a resistive load under 2 A
•systems driven by a contactor or a relay (inductive load)
•fan-equipped heating systems
•central heating systems
SUPPLIED PARTS
•One (1) thermostat
•Two (2) 6-32 mounting screws
•Two (2) solderless connectors
TURN OFF POWER OF THE HEATING SYSTEM AT THE MAIN
POWER PANEL TO AVOID ELECTRIC SHOCK.
Loosen the screw holding the control module to the base. The screw
cannot be completely removed. Lift the control module to remove it
from the base.
Make the appropriate connections. Please note that the thermostat
wires are non-polarized; either wire can be connected to either termi-
nal.
NOTE: All cables and connections must conform to the local electri-
cal code. Special CO/ALR solderless connectors must be used when
connecting with aluminium conductors.
Align and affix the base to the
electrical box.
Set the switch at the back of the remov-
able part of the thermostat to °C or °F.
Replace the front part of the thermostat
on the base and secure it in place with
the screw.
Keep air vents of thermostat clean and
free from obstructions.
n
n
n
nn 1.
o
o
o
oo 2.
Temperature
display
Heating power
indicator
Temperature
adjustment
buttons
2-wire installation
4-wire installation

Beoordeel deze handleiding


Alle foutcodes Honeywell Thermostaat 29 foutcodes uit 25 handleidingen, met hun betekenis.

Product specificaties

Merk: Honeywell
Categorie: Thermostaat
Model: RLV310

Heb je hulp nodig?

Als je hulp nodig hebt met Honeywell RLV310 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden