Honeywell RDWL917AX2000 Handleiding
Bekijk gratis de handleiding van Honeywell RDWL917AX2000 (32 pagina’s), behorend tot de categorie Deurbel. Deze gids werd als nuttig beoordeeld door 84 mensen en kreeg gemiddeld 3.7 sterren uit 42.5 reviews. Heb je een vraag over Honeywell RDWL917AX2000 of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/32

RDWL917AX2000
Read before installing
Installation and Operation Guide
Portable Wireless Doorbell
Preparation
Doorbell
Push
Button
Wall
Anchors
Round Head
Screws
Flat Head
Screws
Phillips Screwdriver
Standard Screwdriver
Drill and 1/4 in. (6.3 mm) drill bit
4 C alkaline batteries
Doorbell Wall
Mounting Bracket
Push Button Mounting
Bracket
and Adhesive Pad
To install you will needIn the box you will find
The push button supplied with this kit is pre-programmed to operate with the doorbell.
If it is not, see “Connect a Push Button” on page 6.
CR2032
Battery
USB
Cable

2
Overview
Just follow these simple steps:
1. Install batteries.
2. Set up the doorbell and your preferences.
3. Install the doorbell and the push button.
Safety
Before proceeding with the installation, please note the following safety
warnings:
• Always follow the manufacturer’s advice when using power tools and wear
suitable protective equipment (e.g. safety goggles) when drilling holes, etc.
• Before drilling holes in walls, check for hidden electricity cables and water
pipes. The use of a cable/pipe locator is advisable if in doubt.
Install Batteries
1. Open the battery cover and
install 4 C alkaline batteries.
2. Open the battery cover and
install the CR2032 battery.
+
Setup and Operation
Press the push button to test whether it is paired with the doorbell. The
doorbell will light up and ring. If it does not, see “Connect a Push Button” on
page 6.
Change the Tune
Press the Music button to
change the doorbell tune.
Every time you press the Music
button, the tune will change.
Stop pressing the Music button
when you hear the tune you
want.
Ding Dong
Westminster
Piano
Fantasy
Marimba
Bell
Soft Alert
Smart Sax
Glocken
Clock-ding-dong
Contemporary
Your Tune (any MP3 le you
copy to the doorbell)

3
Change the Halo Light Color
Press the push button.
Within 12 seconds, press the
Sunlight button.
Every time you press the Sunlight
button, the halo light will change
colors. Stop pressing the Sunlight
button when you see the color you
want:
Light Blue
White
Red
Dark Blue
Green
Purple
Yellow
Change the Light Pattern
Press the Sunlight button to change the lights that ash
when the doorbell rings.
Press the Sunlight button
1 time 2 times 3 times 4 times
Halo light and
top lights
Halo light
only
Top lights only No lights
Adjust the Volume
Press the Volume
Up or Volume Down
buttons to adjust
the volume of the
Doorbell.
Product specificaties
Merk: | Honeywell |
Categorie: | Deurbel |
Model: | RDWL917AX2000 |
Heb je hulp nodig?
Als je hulp nodig hebt met Honeywell RDWL917AX2000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Deurbel Honeywell
29 Mei 2023
27 Mei 2023
22 Mei 2023
11 Mei 2023
4 Mei 2023
3 Mei 2023
28 April 2023
25 April 2023
22 April 2023
20 April 2023
Handleiding Deurbel
- Kruidvat
- Mercury
- Inventum
- Middle Atlantic
- Orbegozo
- Melinera
- EQ3
- Sencor
- Bearware
- Hama
- Eken
- X-Sense
- V-Tac
- ZAMEL
- Techly
Nieuwste handleidingen voor Deurbel
15 Juni 2025
15 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
11 Juni 2025
10 Juni 2025
10 Juni 2025
19 Mei 2025
28 April 2025