Honeywell IS3050 Handleiding

Honeywell Bewegingsmelders IS3050

Lees hieronder de 📖 handleiding in het Nederlandse voor Honeywell IS3050 (4 pagina's) in de categorie Bewegingsmelders. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

IS3050 Passive Infrared Motion Sensor - Installation Instructions

QUICK LINKS

Mounting Location Guidelines

Open the Sensor

Mount the Sensor

Sensor Co nts and Settingsmpone

Wire the Sensor

Walk Test the Sensor

Detection Patterns

Relay Operation

Troubleshooting

Sensor Specifications

Accessories

Approval Listings

Mounting location guidelines:

• The optimal range is obtained at a

mounting height o f 7’ 6” (2.3 m).

• - - Allow a clear line of sight to all areas to protect.

• Do not directly face windows.

• . Avoid close proximity to moving machinery, fluorescent lights, and heating/cooling sources

• Not for use in applications with pets.

1. Turn the arrow to point to the Unlock symbol.

2. Press firmly on housing latch.

3. Gently separate the front and rear housing.

- 2 -

• [A] = Wall mounting holes.

• [B] = Corner mounting holes.

• The rear tamper plate MUST

be mounted to a stud, solid

wood, or with a robust wall

anchor.

- 3 -

LED

Power

Up Walk Test Normal Trouble

Red

Slow

Blink

Alarm

Fast

Blink

Zones

2 Look-down

Lower

Intermediate

Long

1. Close the sensor and apply power to the sensor. Initialization is complete when the LED stops flashing

slowly (about 0 seconds).2

2. Walk through the detection area and observe the LED.

Walk test mode is active for 10 minutes, then automatically exits test mode, disables the LED and enters

normal operation mode. For an additional 10 minute walk test, enable est mode again with the w talk

f . lashlight feature

Note: During power up and w est mode the LED is active regardless of the LED Enable/Disable Dip switch setalk t s ting.

Flashlight Feature:

1. Use a flashlight with a bright light beam, and stand within 4’ (1.2 m) of the sensor.

2. Swing the light beam past the sensor IR window 3 5 times, holding the beam -

on the window for 0.5 second each pass.

The flashlight feature is only available for the first 24 hours after first power up .

Product specificaties

Merk:	Honeywell
Categorie:	Bewegingsmelders
Model:	IS3050
Kleur van het product:	Wit
Gewicht:	85 g
Breedte:	57 mm
Diepte:	43.5 mm
Hoogte:	98 mm
Materiaal behuizing:	Acrylonitrielbutadieenstyreen (ABS)
Plaatsing:	Binnen
Connectiviteitstechnologie:	Bedraad
Montagewijze:	Muur
Type stroombron:	DC
Certificering:	UL, ULC, SIA, FCC
Type beeldsensor:	Passieve infraroodsensor (PIR)
Aantal per verpakking:	1 stuk(s)
Ingangsspanning:	9 - 15 V
Frequentie:	50/60 Hz
Stroomverbruik:	13 mA
Inclusief schroeven:	Ja
LED kleur:	Rood
Bedrijfstemperatuur (T-T):	-10 - 55 °C
Relatieve vochtigheid in bedrijf (V-V):	5 - 93 procent
Detectieafstand:	22 m
Installatie hoogte (min):	2.1 m
Installatie hoogte (max):	2.7 m
Ultraviolet (UV)-bestendig:	Ja
Lichtgevoeligheid:	6500 Lux
Statische stroom:	13 mA