Honeywell HY-221 Febreze Freshness Handleiding

Honeywell Ventilatoren HY-221 Febreze Freshness

Lees hieronder de đź“– handleiding in het Nederlandse voor Honeywell HY-221 Febreze Freshness (42 pagina's) in de categorie Ventilatoren. Deze handleiding was nuttig voor 58 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/42
IMPORTANT SAFETY
INSTRUCTIONS
READ AND SAVE THESE SAFETY
INSTRUCTIONS BEFORE USING
THIS FAN
When using electrical appliances, basic
precautions should always be followed to
reduce the risk of fire, electric shock, and
injury to persons, including the following:
FOR US MODELS ONLY – This product em-
ploys overload protection (fuse). A blown fuse
indicates an overload or short-circuit situation.
If the fuse blows, unplug the product from
the outlet. Replace the fuse as per the user
servicing instructions (follow product marking
for proper fuse rating) and check the product.
If the replacement fuse blows, a short-circuit
may be present and the product should be
discarded or returned to an authorized service
facility for examination and/or repair.
1. Use this fan only as described in this manual.
Other use not recommended as it may cause
fire, electric shock or injury to persons.
2. This product is intended for household
use ONLY and not for commercial, industrial or
outdoor use.
3. To protect against electric shock, do not place
fan in window, immerse unit, plug or cord in
water or spray with liquids.
Owner’s Manual
The Honeywell Trademark is used by Kaz USA, Inc. under license from Honeywell International Inc.
Honeywell International Inc. makes no representation or warranties with respect to this product.
Febreze is a trademark of The Procter & Gamble Company Cincinnati, Ohio used under license by Kaz USA, Inc.
4. This appliance has a polarized plug (one blade
is wider than the other). To reduce the risk
of shock, this plug is intended to fit only one
way in a polarized outlet. If the plug does not
fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician.
DO NOT attempt to defeat this safety feature.
5. Close supervision is necessary when any
appliance is used by or near children.
6. Turn the fan OFF and unplug the fan from
the outlet when not in use, when moving the
fan from one location to another and before
cleaning.
7. To disconnect the fan, first turn the unit OFF,
grip the plug and pull it from the wall outlet.
Never pull the plug by the cord.
8. Do not operate the fan in the presence of
explosive and/or flammable fumes.
9. Do not place the fan or any parts near an open
flame, cooking or other heating appliance.
10. Do not operate the fan with a damaged cord or
plug or if the product malfunctions, is dropped
or damaged in any manner (see warranty).
11. Avoid contact with moving fan parts.
12. The use of attachments not recommended by
the manufacturer may be hazardous.
13. Place the fan on a dry level surface.
HONEYWELL WITH
FEBREZE FRESHNESSTM
COOL & REFRESH
TOWER FANS
HY-200 & HY-220 Series
- 2 -
14. Do not hang or mount fan on a wall
or ceiling.
15. Do not operate if the fan housing is damaged.
16. A loose fit between the AC outlet (receptacle)
and plug may cause overheating and a
distortion of the plug. Contact a qualified
electrician to replace loose or worn outlet.
17. Do not operate any fan with a damaged cord
or plug. Discard any damaged fan, return
the fan to the retailer where the fan was
purchased, or request a return authorization
to return to Kaz USA, Inc. for examination
and/or repair.
USER SERVICING INSTRUCTIONS
• Graspplugandremovefromthereceptacleorotheroutletdevice.
Do not unplug by pulling on cord.
• Ifyourfanlosespowerandyoususpectthatthefuseonyourfanhas
blown, you should first remove the spare fuse holder attached to the
cord plug (Fig. 1). Remove the spare fuse from the plastic spare fuse
holder, and set the spare fuse aside (Fig. 2).
• Youcangainaccesstotheblownfusebyslidingopenthedoor
found on the side of the plug. Slide the door outward until the blown
fuse is fully visible (Fig. 3).
• Carefullyremovetheblownfuseandsnapthereplacementfuseinto
place. Risk of fire. Replace fuse only with 2.5 Amp, 125 volt fuse
(provided with product). Fully close the fuse door by sliding back
into place. Discard the blown fuse. The plug should now be ready for
normal use.
• Risk of fire. Do not replace attached plug. Contains a safety device
(fuse) that should not be removed. Discard product if the attached
plug is damaged.
• Ifyouneedfurtherinformationonhoworwhentoreplacethefusein
the safety plug, please contact Kaz Consumer Relations Department
by visiting our website at www.HoneywellFanSavings.com or calling
1-800-477-0457.
Thank you for your purchase.
This fan features a fused safety plug which is designed to cut off electric current to the fan if an
electrical fault occurs. Please see below for more information on how to properly use your fan and
replace the safety plug fuse, if needed.
FUSED SAFETY PLUG - FOR US ONLY
Fig. 1
Fig. 2
Fig. 3
18. Do not run fan cord under carpeting. Do
not cover cord with throw rugs, runners, or
similar coverings. Do not route cord under
furniture or appliances. Arrange cord away
from traffic areas and where it will not be
tripped over.
WARNING: To Reduce The Risk of Fire or
Electric Shock, Do Not Use This Fan With
Any Solid-State Speed Control Device,
other than the one supplied.
- 3 -
Power
Button
Oscillation
Button
Scent
Control
Dial
Scent
Cartridge
Compartment
Speed
Control
FAN OPERATION - HY-200 Series
On/Off
& Speed
Control
Oscillation
Button
Scent
Control
Dial
Scent
Cartridge
Compartment
On/Off
To turn fan on, turn the fan Speed Control
knob ( ) located on the bottom of the control
panel clockwise.
Speed Control
Turn the fan Speed Control knob clockwise to
set the Fan at High ( ) or Low ( ).
Oscillation
To activate the Oscillation feature, press the
Oscillation button ( ) once.
Press the Oscillation button again to turn the
Oscillation feature off.
1. Remove the fan from the plastic bag and carton.
2. Place the fan on a dry level surface.
3. Plug the fan into a 120 volt outlet.
See the next two pages for instructions on installing the Febreze
® Set&Refresh® scent cartridge.
FAN OPERATION - HY-220 Series
On/Off
To turn fan on, press the Power button ( )
located on the bottom of the control panel.
Speed Control
Press the preferred Speed Control Button to
set the Fan to operate at High ( ) speed,
Medium ( ) speed or Low ( ) speed.
Oscillation
To activate the Oscillation feature, press the
Oscillation button ( ) once.
Press the Oscillation button again to turn the
Oscillation feature off.
1. Remove the fan from the plastic bag and carton.
2. Place the fan on a dry level surface.
3. Plug the fan into a 120 volt outlet.
See the next two pages for instructions on installing the Febreze
® Set&Refresh®
scent cartridge.

Product specificaties

Merk: Honeywell
Categorie: Ventilatoren
Model: HY-221 Febreze Freshness

Heb je hulp nodig?

Als je hulp nodig hebt met Honeywell HY-221 Febreze Freshness stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Ventilatoren Honeywell

Honeywell

Honeywell HT-908 Handleiding

3 Oktober 2022
Honeywell

Honeywell HY-221 Febreze Freshness Handleiding

3 Oktober 2022

Handleiding Ventilatoren

Nieuwste handleidingen voor Ventilatoren

BEKO

BEKO EFS7700W Handleiding

3 Oktober 2022
Domo

Domo DO8146 Handleiding

3 Oktober 2022
Nedis

Nedis FNFL20CBK30 Handleiding

3 Oktober 2022
Proklima

Proklima TFN-110145.2 Handleiding

3 Oktober 2022
Emerio

Emerio FN-114201.3 Handleiding

3 Oktober 2022
Svan

Svan SVVE01180R Handleiding

3 Oktober 2022
Orbegozo

Orbegozo SF 0147 Handleiding

3 Oktober 2022
Telefunken

Telefunken TKVPP1 Handleiding

3 Oktober 2022
Emerio

Emerio MIS-122958.2 Handleiding

3 Oktober 2022
Emerio

Emerio FN-114204.3 Handleiding

3 Oktober 2022