Honeywell HC30W45R3 Handleiding

Honeywell Bewakingscamera HC30W45R3

Lees hieronder de 📖 handleiding in het Nederlandse voor Honeywell HC30W45R3 (3 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3

12V DC (Optional)

x4 x1

M4×25 M2.5×8

HC30W42R3 HC30W45R3

30 Series

Micro

WDR 2 MP/5 MP IR Rugged Mini Dome

Camera

(Optional)

Micro

Reset

PoE

ø5mm ø30mm PH2

ø5mm ø30mm

ø5mm

ø30mm

1”

IP66

Regulatory Statements

FCC Statement of Compliance

Manufacturer's Declaration of Conformance

Waste Electrical and Electronic Equipment (WEEE)

WARNING

Cautions and Warnings

To ensure compliance with electrical safety standards,

CSA Certiﬁed/UL Listed LPS or Class 2 power adapters are required. Power

over Ethernet (PoE) shall be provided by listed Information

Technology Equipment meeting the IEEE 802.3af PoE standard. The

PoE is not intended to be connected to exposed (outside plant)

networks.

THIS SYMBOL INDICATES THAT

DANGEROUS VOLTAGE

CONSTITUTING A RISK OF

ELECTRIC SHOCK IS PRESENT

WITHIN THE UNIT.

THIS SYMBOL INDICATES THAT

IMPORTANT OPERATING AND

MAINTENANCE INSTRUCTIONS

ACCOMPANY THIS UNIT.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE COVER

(OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

Logging On to the Camera

If logging on the camera remotely from a PC, install the Honeywell Conﬁg Tool

from the software and documentation CD, ﬁnd the camera on the network, and

then open the web browser with the Honeywell Conﬁg Tool. The default user

name is (case-sensitive) and the default password is .admin 1234

Note Internet Explorer 11 (or later) with ActiveX plug-in is supported.

Chrome 71 (or later) is supported for H.264 video. Chrome is not supported for

H.265 video.

IP address of the device is assigned automatically by DHCP server. If the DHCP

server is not available, the device will acquire as the default IP 192.168.1.108

address.

+1 0 3 6 th America only) 80 32 457 (Nor

reproduced by any means without written permission from Honeywell. The i ormation in this nf

publication is believed to be accurate in all respects. However, Honeywell ca ot assume nn

responsibility for any consequences result g from the use thereof. The i ormation contained in nf

herein is subject to change without notice. Revisions or new editions to this publication may be

issued to corporate such changes. For patent i ormation, see in nf www.honeywell.com/patent.

www.honeywell.com/security

Honeywell

Support Brackets

HQA-BB2 Junction Box

Pendant Mount CapHQA-PK

HQA-PM2 with HQA-BB2 Pole Mount

HC30W42R3

Information to the User: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Operation of

this equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own expense.

The manufacturer declares that the equipment supplied with this guide is compliant

with the European Parliament and Council Directive on the Restrictions of the use of

certain hazardous substances in electrical and electronic equipment (2011/65/EU),

General Product Safety Directive (2001/95/EC), and the essential requirements of the

EMC Directive (2014/30/EU), conforming to the requirements of standards EN 55032 for

emissions, EN 50130-4 for immunity, and EN 62368-1 for electrical equipment safety.

Note Changes or modiﬁcations not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

Correct Disposal of this Product (applicable in the European Union and other

European countries with separate collection systems).

This product should be disposed of, at the end of its useful life, as per applicable

local laws, regulations, and procedures.

Important Safeguards

Read and keep these instructions.

Please ensure that your installation area can safely support the weight of the camera.

Do not aim the camera toward a bright light source for extended periods to prevent

damage to the imager. Avoid operating the unit under or close to unstable light sources

(may cause ﬂickering), or close to ﬂuorescent lamps or objects reﬂecting light.

Do not touch the camera lens.

Do not drop the camera or subject it to physical shock.

Do not use a strong or abrasive detergent when cleaning the camera.

Avoid operating or storing the unit in extremely humid, dusty, hot/cold environments,

where the operating temperature is outside the recommended range of -22°F to 140°F

(-30°C to 60°C).

Avoid operating the unit close to sources of powerful electromagnetic radiation, such as

radio or TV transmitters.

If powered by a power adapter, the adapter should be properly grounded.

Consult Honeywell for the recommended adapter or check it in Honeywell DOC.

Document 800-25039V1 – Rev A – 05/2019

Product specificaties

Merk:	Honeywell
Categorie:	Bewakingscamera
Model:	HC30W45R3
Kleur van het product:	Black, White
Gewicht:	540 g
Breedte:	117.11 mm
Diepte:	89.51 mm
Gewicht verpakking:	880 g
Soort:	IP-beveiligingscamera
Internationale veiligheidscode (IP):	IP66
Bluetooth:	Nee
Maximale capaciteit van de geheugenkaart:	256 GB
Ondersteunde videoformaten:	H.264, H.265
Vormfactor:	Bolvormig
Video recording:	Ja
Ondersteuning voor plaatsing:	Binnen & buiten
Connectiviteitstechnologie:	Bedraad en draadloos
Ethernet LAN:	Ja
Montagewijze:	Plafond/muur
Maximum resolutie:	2560 x 1920 Pixels
Totaal aantal megapixels:	5 MP
Type stroombron:	DC, PoE
Stroomuitvoer (volt):	12
Minimale belichting:	0.03 Lux
Geïntegreerde geheugenkaartlezer:	Ja
Compatibele geheugenkaarten:	MicroSD (TransFlash), MicroSDHC, MicroSDXC
Ingebouwde HDD:	Nee
Nachtvisie:	Ja
Vaste focale lengte:	2 mm
Aantal Ethernet LAN (RJ-45)-poorten:	1
Vermogensverbruik (max):	6.49 W
Formaat analoog signaal:	NTSC, PAL
Omvang optische sensor:	1/2.7 "
Aansluiting voor netstroomadapter:	Ja
Type beeldsensor:	CMOS
Witbalans:	Auto, Manual
Ondersteunde grafische resoluties:	640 x 480 (VGA),800 x 600 (SVGA),1280 x 960,1600 x 1200 (UXGA),2048 x 1536 (QXGA),2560 x 1920
Ondersteunt Windows:	Windows 10, Windows 7
Aantal gebruikers:	10 gebruiker(s)
Maximaal 30 frames per seconde:	30 fps
Ethernet interface type:	Gigabit Ethernet
IK code:	IK10
Type sterkteregeling:	Auto
Maximale afstand:	30 m
Aantal lenzen:	1
Maximum aperture number:	2
Aantal sensoren:	1
Achtergrondverlichting compensatie:	Ja
Highlight Compensation (HLC) (compensatie voor sterke belichting):	Ja
Bitratecontrole:	Constante bitsnelheid (CBR)
Wide Dynamic Range (WDR):	Ja
Wifi:	Nee
Bedrijfstemperatuur (T-T):	-30 - 60 °C
Relatieve vochtigheid in bedrijf (V-V):	0 - 90 procent
Lens diameter:	2.8 mm
Kijkhoek lens, horizontaal:	103 °
Kijkhoek lens, verticaal:	76 °
Dynamisch bereik:	120 dB
Interessegebied-codering (ROI):	Ja
Smart IR:	Ja