Home Easy HE-307 Handleiding

Bekijk gratis de handleiding van Home Easy HE-307 (16 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 30 mensen en kreeg gemiddeld 4.9 sterren uit 9 reviews. Heb je een vraag over Home Easy HE-307 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

HomeEasy Remote

Control Light Switch

V1.0

The HE-307and HE-308 Remote Control

light switches are expansion units for

the HomeEasy range of products and

designed to work with all the

HomeEasy receiver sockets and

modules.

Additional HomeEasy receiver products

are required for the HE-307/HE-308 to

work.

HOME

easy

1Gang:

S1: On/Dim

S1: On/Dim

S1: Off

S1: Off

2Gang:

Product Operation:

Pairing/Deleting with Remote Control:

Up to Six remote controls can be paired with each Receiver Socket or Module. To

pair the switch and a socket together, press "Learn" button. The LED will start to

flash, now press the selected "ON" button on the remote control, the LED will stop

flashing. The units are now paired together, you can test this by pressing the

selected "On/Off" button.

Always refer to the original instruction when using with additional products

On/Dim

Off

Deleting Remote Control:

To delete a remote control that has been paired with a HomeEasy Receiver

socket or module, simply press the "Learn" button. The LED will start to blink;

press the "Off" button on the remote control, the LED will blink twice to

confirm that the remote control has been removed from the receiver sockets

memory.

Remote Socket reset:

To delete all the remote control units from the memory of the Receiver Socket

or module, hold the "Learn" button for more than 6 seconds, the LED will start

to blink continuously. Press the learn button again, the LED will blink twice to

confirm the deletion of all remote controls form the receiver memory.

Changing Battery:

Replace the battery with a new CR2032

battery (Byron SX100), making sure the

polarity is correct, then replace the front

cover.

Dimming: (Compatiable Receivers Only)

To dim a compatible receiver socket or module, switch the receiver on and

then press "On" again. The unit will now start to dim to select the required

level press "On" again.

Using a small flat screwdriver remove the front cover by placing the

screw driver in the location notch on the bottom part of the rocker cover

and unclip the cover.

Product specificaties