Hitachi SV12SH Handleiding

Hitachi Schuurmachine SV12SH

Lees hieronder de 📖 handleiding in het Nederlandse voor Hitachi SV12SH (9 pagina's) in de categorie Schuurmachine. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9

Orbital Sander

Model SV 12SH

Handling instructions

Note:

Before using this Electric Power Tool, carefully read through these

HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is

recommended that these INSTRUCTIONS be kept readily available

as an important reference when using this power tool.

GENERAL SAFETY RULES

WARNING!

Read all instructions

Failure to follow all instructions listed below may result in

electric shock, fire and/or serious injury.

The term “power tool” in all of the warnings listed below

refers to your mains operated (corded) power tool or battery

operated (cordless) power tool.

SAVE THESE INSTRUCTIONS

1) Work area

a) Keep work area clean and well lit.

Cluttered and dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of flammable

liquids, gases or dust.

Power tools create sparks which may ignite the

dust of fumes.

c) Keep children and bystanders away while operating

a power tool.

Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet.

Never modify the plug in any way.

Do not use any adapter plugs with earthed

(grounded) power tools.

Unmodified plugs and matching outlets will reduce

risk of electric shock.

b) Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators.

There is an increased risk of electric shock if your

body is earthed or grounded.

c) Do not expose power tools to rain or wet

conditions.

Water entering a power tool will increase the risk

of electric shock.

d) Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts.

Damaged or entangled cords increase the risk of

electric shock.

e) When operating a power tool outdoors, use an

extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces

the risk of electric shock.

f) Recommendation for the use of residual current

device with a rated residual current of 30mA

or less.

3) Personal safety

a) Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the influence of drugs, alcohol or medication.

A moment of inattention while operating power

tools may result in serious personal injury.

b) Use safety equipment. Always wear eye protection.

Safety equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing protection used

for appropriate conditions will reduce personal

injuries.

c) Avoid accidental starting. Ensure the switch is in

the off position before plugging in.

Carrying power tools with your finger on the

switch or plugging in power tools that have the

switch on invites accidents.

d) Remove any adjusting key or wrench before

turning the power tool on.

A wrench or a key left attached to a rotating part

of the power tool may result in personal injury.

e) Do not overreach. Keep proper footing and balance

at all times.

This enables better control of the power tool in

unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves

away from moving parts.

Loose clothes, jewellery or long hair can be caught

in moving parts.

g) If devices are provided for the connection of dust

extraction and collection facilities, ensure these

are connected and properly used.

Use of these devices can reduce dust related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application.

The correct power tool will do the job better and

safer at the rate for which it was designed.

b) Do not use the power tool if the switch does not

turn it on and off.

Any power tool that cannot be controlled with the

switch is dangerous and must be repaired.

c) Disconnect the plug from the power source before

making any adjustments, changing accessories, or

storing power tools.

Such preventive safety measures reduce the risk

of starting the power tool accidentally.

d) Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the

power tool or these instructions to operate the

power tool.

Power tools are dangerous in the hands of

untrained users.

e) Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and

any other condition that may affect the power

tools’ operation.

If damaged, have the power tool repaired before

use.

Many accidents are caused by poorly maintained

power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

g) Use the power tool, accessories and tool bits etc.,

in accordance with these instructions and in the

manner intended for the particular type of power

tool, taking into account the working conditions

and the work to be performed.

Use of the power tool for operations different from

intended could result in a hazardous situation.

5) Service

a) Have your power tool serviced by a qualified repair

person using only identical replacement parts.

This will ensure that the safety of the power tool

is maintained.

*Be sure to check the nameplate on product as it is subject to change by areas.

SPECIFICATIONS

Voltage (by areas)* (110 V, 120 V, 220 V, 230 V, 240 V)

Power Input 200 W*

No-load speed 14000 min

–1

Sanding pad size 110 mm × 190 mm

Sanding paper size 110 mm × 100 mm (Square), 96 mm 96 mm (Triangle)× 96 mm ×

Weight (without cord) 1.0 kg

STANDARD ACCESSORIES

䡬110 × 100 mm Velcro type sanding paper

(Square) ....................................................................... 1

䡬96 × 96 × 96 mm Velcro type sanding paper

(Triangle) ..................................................................... 2

䡬Dust bag ...................................................................... 1

Standard accessories are subject to change without

notice.

OPTIONAL ACCESSORIES (sold separately)

1. Sanding paper

䡬110 × 100 mm Velcro type sanding paper (Square)

Grain: AA60, AA100, AA150

䡬96 × 96 × 96 mm Velcro type sanding paper (Triangle)

Grain: AA60, AA100, AA150

2. Punch plate

Optional accessories are subject to change without notice.

APPLICATIONS

Mainly used for the following purposes at corners or

gaps.

䡬Finish polishing of woodwork surfaces

䡬Sanding surfaces of woodwork or sheet metal prior

to painting, etc.

PRIOR TO OPERATION

1. Power source

Ensure that the power source to be utilized conforms

to the power requirements specified on the product

nameplate.

2. Power switch

Ensure that the power switch is in the OFF position. If

the plug is connected to a receptacle while the power

switch is in the ON position, the power tool will start

operating immediately, which could cause a serious

accident.

3. Extension cord

When the work area is removed from the power

source, use an extension cord of sufficient thickness

and rated capacity. The extension cord should be

kept as short as practicable.

4. Installing the sanding paper

(1) Align the sanding paper’s holes with the pad’s holes

( ).Fig. 1

Fig. 1

(2) Strongly push the sanding paper with the palm of

your hand to fasten it securely in place (Fig. 2).

Fig. 2

5. Attaching and Removing the Dust Bag

(1) Attaching the Dust Bag

As shown in , hold the dust gate and push it inFig. 3

the direction of Arrow A to attach it to the dust outlet.

(2) Removing the Dust Bag

As shown in , hold the dust gate and pull it inFig. 3

the direction of Arrow B to remove it from the dust

outlet.

Sanding

paper

Sanding

paper

PRECAUTION

Keep children and infirm persons away.

When not in use, tools should be stored out of reach of

children and infirm persons.

Product specificaties

Merk:	Hitachi
Categorie:	Schuurmachine
Model:	SV12SH
Kleur van het product:	Black, Green
Gewicht:	1000 g
Breedte:	110 mm
Hoogte:	133 mm
Stroombron:	AC
Vormfactor:	Handschuurmachine
Stofzuigercontainer type:	Stofzak
Soft grip:	Ja
Input vermogen:	200 W
Stationair toerental (max):	14000 RPM
Meegeleverde stofzak:	Ja
Stationair aantal schuurbewegingen (max):	28000 OPM
Zandpapier inclusief:	Ja
Lengte (max):	230 mm
Bevestiging schuurmateriaal:	Klittenband
Type schuurmachine:	Schuurmachine
Stofafzuigingspoort:	Ja
Excentriciteit:	0.75 mm
Oscillerende baan diameter:	1.5 mm
AC-ingangsspanning:	230 V
Geluidsvermogensniveau:	82 dB
Schuuroppervlakte grootte (BxD):	110 x 190 mm