Hitachi CP-WX11000 Handleiding

Hitachi Beamer CP-WX11000

Bekijk gratis de handleiding van Hitachi CP-WX11000 (78 pagina’s), behorend tot de categorie Beamer. Deze gids werd als nuttig beoordeeld door 40 mensen en kreeg gemiddeld 4.5 sterren uit 20.5 reviews. Heb je een vraag over Hitachi CP-WX11000 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Download PDF

Pagina 1/78

Projector

CP-X10000/CP-WX11000/CP-SX12000

User's Manual (detailed) – Operating Guide

Thank you for purchasing this projector.

►Before using this product, please read the "User's Manual -

Safety Guide" and related manuals to ensure the proper use of this product.

After reading them, store them in a safe place for future reference.

WARNING

• The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in

this manual.

• The reproduction, transfer or copy of all or any part of this document is not

permitted without express written consent.

NOTE

Trademark acknowledgment

Various symbols are used in this manual. The meanings of these symbols are

described below.

About this manual

About this manual About this manual

WARNING

CAUTION

This entry warns of a risk of serious personal injury or even

death.

This entry warns of a risk of personal injury or physical damage.

Please refer to the pages written following this symbol.



• Windows® is a registered trademark of Microsoft Corporation in the U.S. and/or

other countries.

• VESA and DDC are trademarks of the Video Electronics Standard Association.

• Mac® is a registered trademark of Apple Inc.

• DVI is a trademark of Digital Display Working Group.

• HDMI, the HDMI logo and High-Deﬁ nition Multimedia Interface are trademarks

or registered trademarks of HDMI Licensing LLC.

• Trademark PJLink is a trademark applied

for trademark rights in Japan, the United

States of America and other countries and areas.

All other trademarks are the properties of their respective owners.

NOTICE This entry notices of fear of causing trouble.

OPTION menu

Item Description

SERVICE

(continued)

COMMUNICATION

(continued)

DAISY CHAIN: Select this type, if it is required to

connect multiple projectors using a shared RS-232C

communication bus, from the computer. (



Network

Guide - 3.8 Multi-controlling the plural projectors (using

DAISY CHAIN function))

OFF: Select this mode if you want to output no data

from the CONTROL

CONTROL

CONTROL OUT

OUT

OUTCONTROL OUT port.

SERIAL IN SETTING/SERIAL OUT SETTING

In these menus, you can select

the communication condition for

each of the CONTROL

CONTROL

CONTROL IN

INCONTROL IN and

CONTROL

CONTROL OUT

OUT

OUTCONTROL OUT ports.

BAUD RATE

4800 bps



9600 bps



38400 bps



19200 bps

PARITY

NONE



ODD



EVEN

TRANSMISSION METHOD

This menu is available only when the NETWORK

BRIDGE is selected for the COMMUNICATION TYPE.

Select the transmission method for communication by

the NETWORK BRIDGE from the

CONTROL

CONTROL OUT

OUT

OUTCONTROL OUT

port.

HALF-DUPLEX



FULL-DUPLEX

HALF-DUPLEX: This method lets the projector make

two way communication, but only one direction, either

transmitting or receiving data, is allowed at a time.

FULL-DUPLEX: This method lets the projector make

two way communication, transmitting and receiving

data at the same time.

•

OFF is selected as the default setting.

• When you select the NETWORK BRIDGE, check

the item, TRANSMISSTION METHOD.

NOTE

• HALF-DUPLEX is selected as the default

setting.

•

When you select HALF-DUPLEX, check the items,

RESPONSE LIMIT TIME and BYTES INTERVAL TIMEOUT.

NOTE

OPTION menu

Item Description

SERVICE

(continued)

COMMUNICATION

(continued)

RESPONSE LIMIT TIME

This menu is available only when the NETWORK

BRIDGE is selected for the COMMUNICATION

TYPE and the HALF-DUPLEX is selected for the

TRANSMISSION METHOD.

Select the time period to wait for receiving response

data from other devise communicating by the

NETWORK BRIDGE and the HALF-DUPLEX through

the CONTROL

CONTROL

CONTROL OUT

OUT

OUTCONTROL OUT port.

OFF



OFF: Select this mode if it is not required to check the

responses from the devise that the projector sends data

to. In this mode, the projector can send out data from

the computer continuously.

1s/2s/3s: Select the time period to keep the projector

waiting for response from the device that the projector

sends data to. While waiting the response, the projector

does not send out any data from the

CONTROL

CONTROL OUT

OUT

OUTCONTROL OUT

port.

BYTES INTERVAL TIMEOUT

This menu is available only when NETWORK BRIDGE

is selected for the COMMUNICATION TYPE and HALF-

DUPLEX is selected for the TRANSMISSION METHOD.

Select the blank time length to judge that the response

data has ﬁ nished in the communicating in the condition

of the NETWORK BRIDGE and the HALF-DUPLEX

through the CONTROL

CONTROL

CONTROL OUT

OUT

OUTCONTROL OUT port.

50ms



100ms



150ms



200ms

•

50ms is selected as the default setting.

NOTE

• OFF is selected as the default setting.

NOTE

Product specificaties

Merk:	Hitachi
Categorie:	Beamer
Model:	CP-WX11000
Gewicht:	13200 g
Geluidsniveau:	39 dB
Connectiviteitstechnologie:	Bedraad
Projector helderheid:	6500 ANSI lumens
Projectietechnologie:	LCD
Projector native resolution:	WXGA (1366x768)
Aantal USB 2.0-poorten:	1
VGA (D-Sub)poort(en):	2
Aantal HDMI-poorten:	1
Soort serieële aansluiting:	RS-232
S-Video ingang:	1
DVI-poort:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	1
Levensduur van de lichtbron:	3000 uur
Volledige HD:	Ja
RS-232 port:	1
Plug and play:	Ja
Luchtfilter:	Ja
Levensduur van de lichtbron (besparingsmodus):	4000 uur
Afmetingen (B x D x H):	476 x 469 x 272 mm
HD-Ready:	Ja
Type product:	Projector voor grote zalen
Digitale gamma correctie:	Ja