Hisense WZXX90-BEB001 Handleiding

Bekijk gratis de handleiding van Hisense WZXX90-BEB001 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 8 mensen en kreeg gemiddeld 4.9 sterren uit 6 reviews. Heb je een vraag over Hisense WZXX90-BEB001 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Note: the pictures shown are schematic diagrams.

Support× 1

Left fixing clip × 1

Right fixing clip × 1

Foot

accessory × 4

Round head

screw × 8

Instruction × 1

1.

Do not strip the screws, you must use the attachment screws to prevent them from becoming mismatched after replacement.

2.

During installation, two people must work together while keeping a safe distance from the wall.

3.Be careful to prevent the bracket and wooden support from falling out and causing injury.

......

3M tape×4

1

......

......

......

Place the bracket flat on the top cover of the washing machine. Align the front end of the bracket with the side panel according to the

enlarged diagram on the left side. Pull out the drawer to its maximum distance to expose the two middle connecting plates. At the

four screw holes on the connecting plates, as shown in the diagram, attach the four pieces of 3M tape provided in the accessories

between the connecting plate and the washing machine top cover. Lean forward and press the 3M tape position for more than three

minutes. Then, according to the enlarged diagram on the right side, use three round head screws to fix the bracket on the top cover

of the washing machine through the outermost three screw holes of the bracket. Please NOTE: this will result in small holes being

made in the top cover of the washing machine.

3M tape ×4

Product specificaties