Hisense RB339D4WG1 Handleiding

Hisense Koelkast RB339D4WG1

Lees hieronder de đź“– handleiding in het Nederlandse voor Hisense RB339D4WG1 (12 pagina's) in de categorie Koelkast. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
4
power plug is not crushed
or damaged. A crushed or
damaged power plug may
overheat and cause a fire.
3. Make sure that you can
access the main plug of the
appliance.
4. Do not pull the main
cable.
5. If the power plug socket
is loose, do not insert the
power plug. There is a risk
of electric shock or fire.
6.You must not operate the
appliance without the
interior lighting lamp cover.
7.The fridge is only applied
with power supply of single
phase alternating current of
220~240V/50Hz. If
fluctuation of voltage in the
district of user is so large
that the voltage exceeds the
above scope, for safety
sake, be sure to apply A.C.
Automatic voltage regulator
of more than 350W to the
fridge. The fridge must
employ a special power
socket instead of common
one with other electric
appliances. Its plug must
match the socket with
ground wire.
The refrigerant isobutene
(R600a) is contained within
the refrigerant circuit of the
appliance, a natural gas
with a high level of
environmental compatibility,
which is nevertheless
flammable. During
transportation and
installation of the appliance,
ensure that none of the
components of the
refrigerant circuit becomes
damaged.
The refrigerant (R600a) is
flammable.
Refrigerant
If the refrigerant circuit
should be damaged:
-Avoid opening flames and
sources of ignition.
-Thoroughly ventilate the
room in which the appliance
is situated.
It is dangerous to alter the
specifications or modify this
product in any way.
Any damage to the cord
may cause a shortcircuit,
fire, and/or electric shock.
Caution:risk of
Electrical safety
1.The power cord must not
be lengthened.
2. Make sure that the
Daily use
Do not store flammable gas
or liquids in the appliance,
There is a risk of
6
leads to overheating. To
achieve sufficient
ventilation, follow the
instructions relevant to
installation.
Wherever possible the back
of the product should not be
close to a wall to avoid
touching or catching warm
parts (compressor,
condenser) to prevent the
risk of a fire, follow the
instructions relevant to
installation.
The appliance must not be
locate close to radiators or
cookers.
Make sure that the mains
plug is accessible after the
installation of the appliance.
For electrical connection
carefully, follow the
instructions given in this
manual.
Unpack the appliance and
check if there are damages
on it. Do not connect the
appliance if it is damaged.
Report possible damages
immediately to the place
you bought it. In this case
retain packing.
It is advisable to wait at
least four hours before
connecting the appliance
to allow the oil to flow
back in the compressor.
Adequate air circulation
should be around the
appliance, lacking this
Installation Important!
caution!
Care and cleaning
Before maintenance, switch
off the appliance and
disconnect the mains plug
from the mains socket.
Do not clean the appliance
with metal objects, steam
cleaner, ethereal oils,
organic solvents or abrasive
cleansers.
Do not use sharp objects to
remove frost from the
appliance. Use a plastic
scraper.
Service
Any electrical work required
to do the servicing of the
appliance should be carried
out by qualified electrician
or competent person.
This product must be
serviced by an authorized
Service Center, and only
genuine spare parts must
be used.
1)If the appliance is Frost
Free.
2)If the appliance
contains freezer
compartment.


Product specificaties

Merk: Hisense
Categorie: Koelkast
Model: RB339D4WG1

Heb je hulp nodig?

Als je hulp nodig hebt met Hisense RB339D4WG1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Koelkast Hisense

Handleiding Koelkast

Nieuwste handleidingen voor Koelkast