Hinkley Lighting Chance 4443BLB Handleiding

Bekijk gratis de handleiding van Hinkley Lighting Chance 4443BLB (1 pagina’s), behorend tot de categorie Verlichting. Deze gids werd als nuttig beoordeeld door 58 mensen en kreeg gemiddeld 4.1 sterren uit 4 reviews. Heb je een vraag over Hinkley Lighting Chance 4443BLB of wil je andere gebruikers van dit product iets vragen? Stel een vraag

HINKLEY LIGHTING 12600 Berea Road Cleveland, OH 44111 800.446.5539 / 216.671.3300 www.hinkleylighting.com

assembly instructions

Family: La Palma Item No. 4443 GL

1.Find a clear area in which you can work.

2.Unpack fixture and glass from carton.

3.Carefully review instructions prior to assembly.

1. To assemble fixture, thread center column (2) into coupler (A) located in the center of

the main body assembly (1).

2. Attach upright (3) to top of center column (2) with ball knob screws (4) provided.

3. Snap bottom of upright (3) into hole located in side of main body (1).

4. Spread arms (B) until they are evenly spaced 120 degrees apart.

5. Thread center stem (5) into coupler (C)located on the bottom of main body assembly (1).

6. Slip beaded cage (6) over center stem (5) and hold in position.

7. Slip cap (7) onto center stem (5) and hold in position.

8. Slip beaded finial (8) onto center stem (5) and hold in position.

9. Thread ball knob (9) onto end of center stem and tighten to secure beaded cage to

fixture.

10. Slip candle sleeve (10) over socket (D).

11. Slip candle drip (11) over end of candle sleeve (10).

12. Hang crystal pentalogues (12) from attachment points indicated.

13. Please refer to the hanging instruction sheet (I.S. 19) provided to hang fixture. After

the fixture can be lamped accordingly.

*** The construction of this fixture will be accomplished by first assembling the

main body of the fixture, making all necessary electrical connections, hanging the

fixture from the ceiling, and then attaching crystal pentalogues.

start here

4443

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18)

AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING

INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED

ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS.

Note: Maximum wattage for 4443 fixture is 60 watts per bulb.

Drawing 1 - Fixture Assembly

1

5

6

7

8

2

4

3

A

11

10

12

B

9

C

2.7.08

Product specificaties