Hikvision IR DS-2CE56H0T-VPITF Handleiding

Hikvision Bewakingscamera IR DS-2CE56H0T-VPITF

Lees hieronder de šŸ“– handleiding in het Nederlandse voor Hikvision IR DS-2CE56H0T-VPITF (13 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/13
TURBO HD
H0T Series Bullet & Dome
Camera
User Manual
User Manual
Thank you for purchasing our product. If there are any
questions, or requests, do not hesitate to contact the
dealer.
This manual applies to the models below:
Type
Model
Type I Camera
DS-2CE16H0T-ITF
DS-2CE16H0T-ITPF
Type Camera II
DS-2CE16H0T-IT1F
DS-2CE16H0T-IT3F
DS-2CE16H0T-IT5F
Type III Camera
DS-2CE56H0T-VPITF
This manual may contain several technical incorrect
places or prinī†“ng errors, and the content is subject to
change without noī†“ce. The updates will be added to
the new version of this manual. We will readily improve
or update the products or procedures described in the
manual.
0100001071116
Regulatory Informaī†­on
FCC Informaī†­on
Please take attenī†¹on that changes or modiī…–caī†¹on not
expressly approved by the party responsible for
compliance could void the userā€™s authority to operate
the equipment.
FCC compliance: This equipment has been tested and
found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protecī†¹on
against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instrucī†¹on manual, may cause harmful interference to
radio communicaī†¹ons. Operaī†¹on of this equipment in a
residenī†¹al area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
FCC Condiī†­ons
This device complies with part 15 of the FCC Rules.
Operaī†¹on is subject to the following two condiī†¹ons:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operaī†¹on.
EU Conformity Statement
This product and - if applicable - the
supplied accessories too are marked with
"CE" and comply therefore with the
applicable harmonized European
standards listed under the Low Voltage Direcī†¹ve
20 /35/EU, the EMC Direcī†¹ve 201 30/EU. 14 4/
20 2/1 19/EU (WEEE direcī†¹ve): Products
marked with this symbol cannot be
disposed of as unsorted municipal waste in
the European Union. For proper recycling,
return this product to your local supplier
upon the purchase of equivalent new
equipment, or dispose of it at designated collecī†¹on
points. For more informaī†¹on see: www.recyclethis.info.
2006/66/EC (baī‡ƒery direcī†¹ve): This product contains a
battery that cannot be disposed of as
unsorted municipal waste in the European
Union. See the product documentaī†¹on for
speciī…–c baī‡ƒery informaī†¹on. The baī‡ƒery is
marked with this symbol, which may
include leī‡ƒering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the baī‡ƒery
to your supplier or to a designated collecī†¹on point. For
more informaī†¹on see: www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A)
standards requirements.
Safety Instrucī†¶on
These instrucī†¶ons are intended to ensure that user can
use the product correctly to avoid danger or property
loss.
The precauī†¦on measure is divided into ā€œWarningsā€ and
ā€œCauī†¦onsā€.
Warnings: Serious injury or death may occur if any of
the warnings are neglected.
Cauī†¶ons: Injury or equipment damage may occur if any
of the cauī†¶ons are neglected.
Warnings
ļ¬ In the use of the device, you must be in strict
compliance with the electrical safety regulaī†¶ons of
the naī†¶on and region.
ļ¬ Input voltage should meet both the SELV (Safety Extra
Low Voltage) and the Limited Power Source with 12
VDC according to the IEC60950-1 standard. Refer to
technical speciī…“caī†¶ons for detailed informaī†¶on.
ļ¬ Do not connect mulī†¶ple devices to one power
adapter to avoid over-heaī†¶ng or a ī…“re hazard caused
by overload.
ļ¬ Make sure that the plug is ī…“rmly connected to the
power socket.
ļ¬ Make sure that the device is ī…“rmly fixed if wall
mounī†¶ng or ceiling mounī†¶ng is adopted.
ļ¬ If smoke, odor or noise rise from the device, turn off
the power at once and unplug the power cord, and
then contact the service center.
ļ¬ Never attempt to disassemble the camera by
unprofessional personal.
Cauī†¶ons
ļ¬ Do not drop the camera or subject it to physical
shock.
ļ¬ Do not touch senor modules with ī…“ngers.
ļ¬ Do not place the camera in extremely hot, cold (the
operaī†¶ng temperature shall be - Ā°C to 60Ā°C), dusty 40
or damp locaī†¶ons, and do not expose it to high
electromagnetic radiation.
ļ¬ If cleaning is necessary, use clean cloth with a bit of
ethanol and wipe it gently.
ļ¬ Do not aim the camera at the sun or extra bright
places.
ļ¬ The sensor may be burned out by a laser beam, so
when any laser equipment is in using, make sure that
the surface of sensor will not be exposed to the laser
beam.
ļ¬ Do not expose the device to high electromagnetic
radiaī†¶on or extremely hot, cold, dusty or damp
environment.
ļ¬ To avoid heat accumulaī†¶on, good venī†¶lation is
required for the operaī†¶ng environment.
Warnings Follow
these safeguards to
prevent serious injury
or death.
Cauī†¶ons Follow these
precauī†¶ons to prevent
potenī†¶al injury or
material damage.


Product specificaties

Merk: Hikvision
Categorie: Bewakingscamera
Model: IR DS-2CE56H0T-VPITF
Kleur van het product: Black,White
Gewicht: 350 g
Hoogte: 82.4 mm
Materiaal behuizing: Metaal
Internationale veiligheidscode (IP): IP67
Bluetooth: Nee
Vormfactor: Dome
Ondersteuning voor plaatsing: Buiten
Connectiviteitstechnologie: Bedraad
Ethernet LAN: Nee
Montagewijze: Plafond
Maximum resolutie: 2560 x 1944 Pixels
Totaal aantal megapixels: 5 MP
Diameter: 111 mm
Type stroombron: DC
Stroomuitvoer (volt): 12
Minimale belichting: 0 Lux
Aantal cameras: 1
Ingebouwde HDD: Nee
Nachtvisie: Ja
LED-type: IR
Infrarood wavelength: 850 nm
Vaste focale lengte: 3.6 mm
Vermogensverbruik (max): 4.3 W
Type beeldsensor: CMOS
Camera sluitertijd: 1/25 - 1/50000; 1/30 - 1/50000 s
Witbalans: ATW,Manual
Ruisonderdrukking: Ja
Ondersteunde talen: Engels
IK code: IK10
Type sterkteregeling: Automatisch/handmatig
Draaihoek: 355 Ā°
Pan bereik: 0 - 355 Ā°
Dag/nacht modus: Ja
Aantal lenzen: 1
Maximum aperture number: 1.2
Controle camerapanning: Ja
Kantelfunctie camera: Ja
Aantal sensoren: 1
Nachtkijker afstand: 20 m
Infrarood (IR)-afsluitingsfilter: Ja
Aantal effectieve pixels (H x V): 2560 x 1944 Pixels
Aantal talen: 2
Aanpassing van de afbeeldingskwaliteit: Brightness,Sharpness
Wifi: Nee
Bedrijfstemperatuur (T-T): -40 - 60 Ā°C
Relatieve vochtigheid in bedrijf (V-V): 0 - 90 procent
Bereik kantelhoek: 0 - 75 Ā°
Spiegel: Ja
Kijkhoek lens, horizontaal: 80.1 Ā°
Digital Wide Dynamic Range (DWDR): Ja

Heb je hulp nodig?

Als je hulp nodig hebt met Hikvision IR DS-2CE56H0T-VPITF stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Hikvision

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera