Hikvision DS-PS1-I-WB Handleiding

Hikvision Alarmsysteem DS-PS1-I-WB

Lees hieronder de 📖 handleiding in het Nederlandse voor Hikvision DS-PS1-I-WB (4 pagina's) in de categorie Alarmsysteem. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
DS-PS1-I-WE
Wireless Internal Sounder
©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change,
without notice, due to rmware updates or other reasons. Please nd the latest version of this Manual at the Hikvision website (https://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.
and other Hikvision's trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES
NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL
HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF
SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM
CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS
PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU
SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY
ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
Appearance
1
2Indication
This product and - if applicable - the supplied accessories too are
marked with "CE" and comply therefore with the applicable harmonized
European standards listed under the RE Directive 2014/53/EU, the RoHS
Directive 2011/65/EU.
replacement of a battery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium
battery types);
– disposal of a battery into re or a hot oven, or mechanically crushing or cutting of a battery, that can result in an
explosion;
– leaving a battery in an extremely high temperature surrounding environment that can
result in an explosion or the leakage of ammable liquid or gas; and
– a battery subjected to extremely low air pressure that may result in an explosion or the leakage of ammable liquid
or gas.
LED Indication Description
Buzzer
2012/19/EU (WEEE directive): Products marked with this symbol
cannot be disposed of as unsorted municipal waste in the European
Union. For proper recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at
designated collection points. For more information see:
www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal
waste in the European Union. See the product documentation for specic battery information. The battery is marked
with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper
recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recy-
clethis.info
Armed
Operations
Green LED ashes 7 times.
Enrolled
Red LED ashes 3 times.
Formatted
Red LED ashes twice.
Disarmed
Red LED ashes once.
Display Signal Strength
indicator turns red for 3 s.
indicator ashes red for 3 s.Disconnected
Week Signal
indicator turns orange for 3 s
Medium Signal
indicator turns green for 3 s.Strong Signal
Check signal strength and select installation place
Enter the signal checking mode by operating on the AX PRO.
Zone Alarm
Note:
-You can sign in web client “Device - Sounder - Settings” or the
mobile client “wireless Device” to adjust the volume of buzzer.
-The zone alarm buzzer in volume level 3 compliants with EN
certication.
Two beeps.
Disarmed
One beep.Armed
Fire bell.Fire Alarm
High and low frequency alternated
impulsive sound.
Panic Alarm
Rapid high frequency impulsive sound.
1
ON
OF F
Indicator Buzzer Set Screw Tamper
Screw Hole
Tamper Button Power Switch
EN 50131-1:2006+A2:2017
EN 50131-4:2019
EN 50131-5-3:2017
Security Grade(SG) 2
Environmental Class(EC) II
Certied by Telecation
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
4Enrollment
5Installation
1. Remove the screw on the bottom of the sounder, and disassemble the peripheral and remove the rear panel.
Note:
for re-enrollment, you need to hold the tamper button while powering the peripheral on simultaneously.
For power on again, push the power swith to ON at least 5 s after power o.
2.Loosen the set screw at the bottom of the sounder and remove the front panel.
-The additional force shall be equal to three times the weight of the equipment but not
less than 50N. The equipment and its associated mounting means shall remain secure
during the installation. After the installation, the equipment, including any associated
mounting plate, shall not be damaged.
-Install the device on the place with nonammable surface, such as concrete wall.
!
2
ON
OF F
ON
OFF
Enroll the Peripheral Locally
Enroll the Peripheral with APP
1. In the APP, tap the "Enrollment Mode" button on the control panel page to make the control panel enter the enroll-
ment status.
2. Push the power switch of the peripheral to on, and it will be automatically enrolled to the control panel.
1. In the APP, tap the icon "+"and scan the QR code on the peripheral or enter the serial No. (Last 5 digit) of the peripheral.
2. Push the power switch of the peripheral to on, and it will be automatically enrolled to the control panel.
2. Log in to the APP Store, download and install App.
3. Power on the security control panel.
4. Log in the APP and tap the icon "+" . Scan the QR code or input the control panel serial No. (Last 5 digit) to add the
control panel.
5. Enroll the peripheral locally, with OR code, or with serial No..
1. Check signal strength and select installation place
Enter the signal checking mode by operating on the control panel.
Signal indicator turns green for 3 s: Strong.
Signal indicator turns orange for 3 s: Medium.
Signal indicator turns red for 3 s: Weak.
Signal indicator ashes red for 3 s: Lost.
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
Operation
6
Formatting
3.Secure the sounder with other three screws.
4.Fix the front panel on the sounder body. Tighten the set screw to complete the installation.
Hold the tamper button, and push the power switch to ON simultaneously. Release the tamper button after 8 s, and the
device will starts formatting. While the formatting is completed, the red LED ashes 3 times.
3
ON
OF F
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China


Product specificaties

Merk: Hikvision
Categorie: Alarmsysteem
Model: DS-PS1-I-WB

Heb je hulp nodig?

Als je hulp nodig hebt met Hikvision DS-PS1-I-WB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Alarmsysteem Hikvision

Handleiding Alarmsysteem

Nieuwste handleidingen voor Alarmsysteem