Hikvision DS-2CE76U7T-ITMF Handleiding

Hikvision Bewakingscamera DS-2CE76U7T-ITMF

Lees hieronder de 📖 handleiding in het Nederlandse voor Hikvision DS-2CE76U7T-ITMF (14 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/14

TURBO HD

U7T Series Turret & Dome

Camera

User Manual

Thank you for purchasing our product. If there are any

questions, or requests, do not hesitate to contact the

dealer.

This manual applies to the models below:

Type

Model

Type I Camera

DS-2CE78U7T-IT1F

DS-2CE78U7T-IT3F

Type II Camera

DS-2CE76U7T-ITMF

Type III Camera

DS-2CE57U7T-VPITF

This manual may contain technical incorrect places or

prinng errors, and the content is subject to change

without noce. The updates will be added to the new

version of this manual. We will readily improve or update

the products or procedures described in the manual.

0100001081124

Regulatory Informaon

FCC Informaon

Please take aenon that changes or modicaon not

expressly approved by the party responsible for

compliance could void the user’s authority to operate the

equipment.

FCC compliance: This equipment has been tested and

found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protecon against

harmful interference when the equipment is operated in

a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instrucon

manual, may cause harmful interference to radio

communicaons. Operaon of this equipment in a

residenal area is likely to cause harmful interference in

which case the user will be required to correct the

interference at his own expense.

FCC Condions

This device complies with part 15 of the FCC Rules.

Operaon is subject to the following two condions:

1. This device may not cause harmful interference.

2. This device must accept any interference received,

including interference that may cause undesired

operaon.

EU Conformity Statement

This product and - if applicable - the

supplied accessories too are marked with

"CE" and comply therefore with the

applicable harmonized European standards

listed under the Low Voltage Direcve 20 /35/EU, the 14

EMC Direcve 2014/30/EU.

2012/19 U (WEEE direcve): Products /E

marked with this symbol cannot be

disposed of as unsorted municipal waste in

the European Union. For proper recycling,

return this product to your local supplier

upon the purchase of equivalent new

equipment, or dispose of it at designated collecon

points. For more informaon see: www.recyclethis.info.

2006/66/EC (baery direcve): This product contains a

battery that cannot be disposed of as

unsorted municipal waste in the European

Union. See the product documentaon for

specic baery informaon. The baery is

marked with this symbol, which may

include leering to indicate cadmium (Cd), lead (Pb), or

mercury (Hg). For proper recycling, return the baery

to your supplier or to a designated collecon point. For

more information, see: www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A)

standards requirements.

Safety Instrucon

These instrucons are intended to ensure that user can

use the product correctly to avoid danger or property

loss.

The precauon measure is divided into “Warnings” and

“Cauons”.

Warnings: Serious injury or death may occur if any of the

warnings are neglected.

Cauons: Injury or equipment damage may occur if any

of the cauons are neglected.

Warnings

 In the use of the device, you must be in strict

compliance with the electrical safety regulaons of the

naon and region.

 Input voltage should meet both the SELV (Safety Extra

Low Voltage) and the Limited Power Source with 12

VDC according to the IEC60950-1 standard. Refer to

technical specicaons for detailed informaon.

 Do not connect mulple devices to one power adapter

to avoid over-heang or a re hazard caused by

overload.

 Make sure that the plug is rmly connected to the

power socket.

 Make sure that the device is rmly xed if wall

mounng or ceiling mounng is adopted.

 If smoke, odor or noise rise from the device, turn o

the power at once and unplug the power cord, and

then contact the service center.

 Never aempt to disassemble the camera by

unprofessional personal.

Cauons

 Do not drop the camera or subject it to physical shock.

 Do not place the camera in extremely hot, cold (the

operang temperature shall be - °C to 60°C), dusty or 40

damp locaons and do not expose it to high ,

electromagnetic radiation.

 Do not touch senor modules with ngers.

 If cleaning is necessary, use clean cloth with a bit of

ethanol and wipe it gently.

 Do not aim the camera at the sun or extra bright places.

 The sensor may be burned out by a laser beam, so

when any laser equipment is in using, make sure that

the surface of sensor will not be exposed to the laser

beam.

 Do not expose the device to high electromagnec

radiaon or extremely hot, cold, dusty or damp

environment.

 To avoid heat accumulaon, good venlaon is

required for the operang environment.

 Keep the camera away from liquid while in use for non-

water-proof device.

Warnings Follow

these safeguards to

prevent serious injury

or death.

Cauons Follow these

precauons to prevent

potenal injury or

material damage.

Product specificaties

Merk:	Hikvision
Categorie:	Bewakingscamera
Model:	DS-2CE76U7T-ITMF
Gebruikershandleiding:	Ja
Materiaal behuizing:	Metaal
Internationale veiligheidscode (IP):	IP67
Ondersteuning voor plaatsing:	Buiten
Maximum resolutie:	3840 x 2160 Pixels
Stroomuitvoer (volt):	12
Minimale belichting:	0 Lux
Type beeldsensor:	CMOS
Pan bereik:	0 - 360 °
Dag/nacht modus:	Ja
Infrarood (IR)-afsluitingsfilter:	Ja
Achtergrondverlichting compensatie:	Ja
Highlight Compensation (HLC) (compensatie voor sterke belichting):	Ja
Aanpassing van de afbeeldingskwaliteit:	Brightness,Sharpness,Mirror
Bereik kantelhoek:	0 - 75 °