Hikvision DS-2CE56D0T-I2PFB Handleiding

Hikvision Bewakingscamera DS-2CE56D0T-I2PFB

Lees hieronder de šŸ“– handleiding in het Nederlandse voor Hikvision DS-2CE56D0T-I2PFB (19 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/19
TURBO HD
D0T Series Turret Camera
User Manual
User Manual
Thank you for purchasing our product. If there are any
questions, or requests, do not hesitate to contact the
dealer.
This manual applies to the models below:
Model
DS-2CE56D0T-I2FB
DS-2CE56D0T-I2PFB
This manual may contain technical incorrect places or
prinī†°ng errors, and the content is subject to change
without noī†°ce. The updates will be added to the new
version of this manual. We will readily improve or update
the products or procedures described in the manual.
0100001090102
Regulatory Informaī†§on
FCC Informaī†§on
Please take aī‡ƒenī†¹on that changes or modiī…–caī†¹on not
expressly approved by the party responsible for
compliance could void the userā€™s authority to operate the
equipment.
FCC compliance: This equipment has been tested and
found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protecī†¹on against
harmful interference when the equipment is operated in
a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instrucī†¹on
manual, may cause harmful interference to radio
communicaī†¹ons. Operaī†¹on of this equipment in a
residenī†¹al area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
FCC Condiī†§ons
This device complies with part 15 of the FCC Rules.
Operaī†¹on is subject to the following two condiī†¹ons:
1. This device may not cause harmful interference.
2. This device must accept any interference received,
including interference that may cause undesired
operaī†¹on.
EU Conformity Statement
This product and - if applicable - the
supplied accessories too are marked with
"CE" and comply therefore with the
applicable harmonized European standards
listed under the Low Voltage Direcī†¹ve 20 /35/EU, the 14
EMC Direcī†¹ve 2014/30/EU, the RoHS Direcī†¹ve
2011/65/EU.
2012/19 U (WEEE direcī†¹ve): Products /E
marked with this symbol cannot be
disposed of as unsorted municipal waste in
the European Union. For proper recycling,
return this product to your local supplier
upon the purchase of equivalent new
equipment, or dispose of it at designated collecī†¹on
points. For more informaī†¹on see: www.recyclethis.info.
2006/66/EC (baī‡ƒery direcī†¹ve): This product contains a
battery that cannot be disposed of as
unsorted municipal waste in the European
Union. See the product documentaī†¹on for
speciī…–c baī‡ƒery informaī†¹on. The baī‡ƒery is
marked with this symbol, which may
include leī‡ƒering to indicate cadmium (Cd), lead (Pb), or
mercury (Hg). For proper recycling, return the baī‡ƒery
to your supplier or to a designated collecī†¹on point. For
more information, see: www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A)
standards requirements.
Warning
This is a class A product. In a domesī†¹c environment this
product may cause radio interference in which case the
user may be required to take adequate measures.
Safety Instrucī†„on
These instrucī†·ons are intended to ensure that user can
use the product correctly to avoid danger or property
loss.
The precauī†·on measure is divided into ā€œWarningsā€ and
ā€œCauī†·onsā€.
Warnings: Serious injury or death may occur if any of the
warnings are neglected.
Cauī†„ons: Injury or equipment damage may occur if any
of the cauī†·ons are neglected.
Warnings
ļ¬ In the use of the device, you must be in strict
compliance with the electrical safety regulaī†·ons of the
naī†·on and region.
ļ¬ Input voltage should meet both the SELV (Safety Extra
Low Voltage) and the Limited Power Source with 12
VDC according to the IEC60950-1 standard. Refer to
technical speciī…”caī†·ons for detailed informaī†·on.
ļ¬ Do not connect mulī†·ple devices to one power adapter
to avoid over-heaī†·ng or a ī…”re hazard caused by
overload.
ļ¬ Make sure that the plug is ī…”rmly connected to the
power socket.
ļ¬ Make sure that the device is ī…”rmly ī…”xed if wall
mounī†·ng or ceiling mounī†·ng is adopted.
ļ¬ If smoke, odor or noise rise from the device, turn oī…‘
the power at once and unplug the power cord, and
then contact the service center.
ļ¬ Never aī‡empt to disassemble the camera by
unprofessional personal.
Cauī†„ons
ļ¬ Do not drop the camera or subject it to physical shock.
ļ¬ Do not touch senor modules with ī…”ngers.
ļ¬ Do not place the camera in extremely hot, cold (the
operaī†·ng temperature shall be - Ā°C to 60Ā°C), dusty or 40
damp locaī†·ons, and do not expose it to high
electromagnetic radiation.
ļ¬ If cleaning is necessary, use clean cloth with a bit of
ethanol and wipe it gently.
ļ¬ Do not aim the camera at the sun or extra bright places.
ļ¬ The sensor may be burned out by a laser beam, so
when any laser equipment is in using, make sure that
the surface of sensor will not be exposed to the laser
beam.
ļ¬ Do not expose the device to high electromagneī†·c
radiaī†·on or extremely hot, cold, dusty or damp
environment.
ļ¬ To avoid heat accumulation, good venī†·laī†·on is
required for the operaī†·ng environment.
ļ¬ Keep the camera away from liquid while in use for non-
water-proof device.
Warnings Follow
these safeguards to
prevent serious injury
or death.
Cauī†„ons Follow these
precauī†·ons to prevent
potenī†·al injury or
material damage.


Product specificaties

Merk: Hikvision
Categorie: Bewakingscamera
Model: DS-2CE56D0T-I2PFB

Heb je hulp nodig?

Als je hulp nodig hebt met Hikvision DS-2CE56D0T-I2PFB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewakingscamera Hikvision

Handleiding Bewakingscamera

Nieuwste handleidingen voor Bewakingscamera